JBL Control X Wireless Bedienungsanleitung

JBL Lautsprecher Control X Wireless

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL Control X Wireless (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
CONTROL X WIRELESS
2-way 5.25” (133mm) Portable Stereo Bluetooth® Speakers
OWNER’S MANUAL
The JBL® brand has been involved in every aspect of music,
film recording and reproduction from live performances to the
recordings you play in the home, car, or on-the-go. We’re confident
that the JBL system you have chosen will provide every note
of enjoyment that you expected and that when you think about
purchasing additional audio equipment for your home, car or office,
you will once again choose a JBL product.
The JBL Control X is an advanced indoor/outdoor* Bluetooth
®
active loudspeaker system that allows you to enjoy your favorite
music in remote locations around the home or in commercial
spaces. To ensure trouble-free performance, please carefully
read these instructions completely before connecting or using the
system.
*Please note that while the JBL Control X WIRELESS is
an all weather outdoor loudspeaker, it is not waterproof.
These speakers should NOT be submerged or directly
exposed to water, ice, snow or sustained moisture. Do
not spray water into the speaker’s rear port.
THANK YOU FOR CHOOSING THIS JBL® PRODUCT
ENGLISH
2
UNPACKING THE SYSTEM
Carefully unpack the system. If you suspect damage from transit,
report it immediately to your dealer and/or delivery service. Keep
the shipping carton and packing materials for future use. Open the
package and verify the following contents:
INCLUDED
1 x JBL Control X Wireless Primary speaker
1 x JBL Control X Wireless Secondary speaker
2 x AC power cord
1 x Owner’s Manual
1 x Safety sheet
TOP-PANEL CONTROLS
PRIMARY SPEAKER
1 2 3 4 5 6 7
8
1. Power
2. Bluetooth pairing (Press and Hold 2 seconds to un-pair current
Bluetooth device)
3. Transport control button (Previous track)
4. Play / Pause
5. Transport control button (Next track)
6. Volume Down
7. Volume Up
8. Battery level indication
9. Front panel LED indication
LED
information
Fixed Quick Flash Regular Flash
White On / No Bluetooth
device connected
Additional speaker association
mode Volume Up and Down
(Stops when reaches Max
or Min)
System is waking up
Blue Bluetooth device
connected
Bluetooth pairing
mode
Note: The front LED indication times out in normal operation mode
Note: to mute the systems simply press and hold volume up and
down simultaneously. Simply press volume up or volume down to un-
mute the system.
SECONDARY SPEAKER
1
2
CONTROL X
1. Power
2. Battery level indication
3. Front panel LED indication
LED
information
Fixed Quick Flash Regular Flash
White On / No Bluetooth
device connected
Additional speaker association
mode Volume Up and Down
(Stops when reaches Max
or Min)
System is waking up
Blue Bluetooth device
connected
Bluetooth pairing
mode
REAR-PANEL CONTROLS
PRIMARY SPEAKER
AC IN
AUX-IN
L/R/L+R
P S
MODE WALL/OTHER
1
23 4
56
1. AC input connector
2. Auxiliary 3.5mm audio input
3. Primary-Secondary mode selector
4. Boundary compensation switch
a. Wall: Speaker equalization optimized for wall mounting.
b. Other: Speaker equalization optimized for other placement
conditions
5. Left / Right / Left + Right switch
a. Left: Speaker reproduces left channel information only
3
www.jbl.com
ENGLISH
b. Right: Speaker reproduces right channel information only
c. Left + Right: Mono configuration speaker reproduces left and
right channels information
6. Association pin hole
SECONDARY SPEAKER
AC IN
L/R/L+R
WALL/OTHER
1
2
34
1. AC input connector
2. Boundary compensation switch
a. Wall: Speaker equalization optimized for wall mounting.
b. Other: Speaker equalization optimized for other placement
conditions
3. Left / Right / Left + Right switch
a. Left: Speaker reproduces left channel information only
b. Right: Speaker reproduces right channel information only
c. Left + Right: Mono configuration speaker reproduces left and
right channels information
4. Association pin hole
PLACING THE SPEAKERS
These speakers can be mounted or placed on a stand, shelf or table.
The following figure shows a possible indoor application. For optimal
performance, do not block the rear port on the back of each speaker.
Left
Surround
Channel
Right
Surround
Channel
Left Front
Channel
Subwoofer
Right Front
Channel
Left
Rear
Channel
Right
Rear
Channel
Center
Channel
Couch
TV
QUICK SETUP AND OPERATION
The speaker set is already factory setup to operate as a pair (primary
and secondary).
1. Connect AC power cords to AC-IN plug located at the rear of each
speaker. Keep AC plugged to maintain battery fully charged.
2. Press power button on each speaker(s) to start operation.
3. Press Bluetooth button and pair with streaming device. (Refer to
Listening to Audio from a Bluetooth capable device section below)
4. If desired to use in battery mode, just unplug the AC power. Speaker
and audio will not be interrupted. Reconnect to AC to recharge
battery.
Note: Primary and Secondary speakers’ factory default settings are as
follow
Control / Switch Primary Secondary
Mode (P) N/A
Wall/ Other Other Other
L/R/L+R (L) (R)
Note: When the system is not playing music it will go automatically
into auto standby mode. To reactivate the system, simply start
playing music and the system will resume automatically. A slight
delay may occur before the secondary speaker wakes up as it needs
resynchronization with the primary speaker. During this phase the front
LED of the secondary speaker will be blinking.
Note: If the system is manually powered off using the power button, it
will need to be manually powered on first to resume playing music.
The system also features sound prompt commands for the following
action / operation
1. Power On
2. Power Off
3. Bluetooth pairing mode
4. Bluetooth connection success
5. Association mode (see Speaker association section)
6. Battery low level
LISTENING TO AUDIO FROM A BLUETOOTH-
CAPABLE DEVICE
1. With speaker(s) powered on AC or Battery power, Press Bluetooth
button on primary speaker
2. An audible prompt will indicate that the speaker successfully
entered BT pairing mode. The front LED will also blink Blue as an
indication that BT pairing mode is enabled.
3. Search and pair with “JBL Control X” from your Bluetooth streaming
device.
4. An audible confirmation will be played once the streaming device
successfully paired with the speaker. The front LED will stop blinking
and remain Blue. Secondary speaker will confirm Bluetooth pairing
by flashing front panel LED Blue for a few seconds.
Note: Only one Bluetooth device can be paired at the same time with
the system. If you need to un-pair the current Bluetooth device to
connect a new one simply press and hold the Bluetooth button on the
primary speaker for more than 2 seconds to disconnect current device.
Then resume the pairing process above from step 2.
FPO

Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: Control X Wireless

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL Control X Wireless benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher JBL

JBL

JBL CS 360Xcite Bedienungsanleitung

6 Oktober 2024
JBL

JBL AM7215/95 Bedienungsanleitung

5 Oktober 2024
JBL

JBL Club 620F Bedienungsanleitung

4 Oktober 2024
JBL

JBL Stadium MB8030AM Bedienungsanleitung

3 Oktober 2024
JBL

JBL Control 24C Micro Bedienungsanleitung

2 Oktober 2024
JBL

JBL Arena 26Be Bedienungsanleitung

2 Oktober 2024
JBL

JBL Control 28T-60 Bedienungsanleitung

24 September 2024
JBL

JBL AM7215/26 Bedienungsanleitung

23 September 2024
JBL

JBL EON One Pro Bedienungsanleitung

16 September 2024
JBL

JBL SRX738F Bedienungsanleitung

16 September 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024