JBL Control 1 Pro Bedienungsanleitung

JBL Lautsprecher Control 1 Pro

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL Control 1 Pro (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Control 1 Pro
Product User’s Guide
Two-Way, Professional Compact Loudspeaker
Key Features
150 Watts Continuous Power
Handling
Professional Drivers and
Crossover Network
Included Mounting Bracket
Transparent and Faithful
Sonic Performance
Magnetically Shielded Enclosure
SonicGuard™ Overload
Protection
Your Control 1 Pro is a compact, high-
performance professional loudspeaker
system that features monitor-grade low
and high frequency drivers coupled with
a professional crossover network. The
rugged and durable molded enclosure is
magnetically shielded making the Control 1
Pro ideal for use with video and computer
monitors or other magnetically sensitive
equipment. Moreover, the Control 1 Pro’s
compact design is ideal for audio-visual
applications, computer workstations,
recording and broadcast studios, mobile
audio-video control rooms and foreground
and background music.
A) Screw the metal rod/ball assembly (1) into the threaded insert (2) on the back of
the cabinet (8) until it is seated against the bottom of the insert.
B) Next, tighten the “knurled” nut (3) with a small wrench until it is seated against the
back of the cabinet. Tighten the nut until it has “locked the rod/ball assembly (1)
to the cabinet. Note: the nut may leave marks on the back of the cabinet where
the attachment is made however, theange of the nut will cover these marks.
Control 1 Pro
Bracket Assembly and Mounting Guide
Control 1 Pro User’s Guide 2
8
2
3
7
14
9
56
10
If there is no sound from your speakers:
Make sure your power amplifier is on and the gain is set above its minimum setting.
Make sure there is a signal to your amplifier from your mixer.
Ensure all wires are connected and that none are cut or frayed.
If more than one pair of speakers is being used, check the minimum impedance
requirments of your amplifier (overloading your amplifier can result in damage to
your amp).
If there is no sound from one of your speakers:
Check the balance control on your mixer.
Check the channel output gains of your amplifier.
Ensure all wires are connected and that none are cut or frayed.
If there is no (or weak) bass output or a poor stereo image:
Make sure the polarities (+ and -) of the speakers inputs are properly connected.
C) Mount the wall bracket plate (4) onto a flat sturdy surface using the
appropriate mounting hardware for the surface. A safety cable (5) (not
included) may be attached to the wall bracket via its eyelet (6) at one of the
two lower screw mounting points or to a secondary point off the mounting plate.
D) Next, slip the large molded nut (7) over the ball on the metal rod/ball assembly (1).
E) Holding the cabinet (8) with both hands, insert the ball on the metal rod/ball
assembly (1) into the cup of the wall plate (4).
F) Orient the speaker into the desired position and hand tighten the molded nut
(7). Once the orientation isnalized, use the metal bar (9) in one of the holes
on the molded nut (7) to securely tighten.
G) Finally, clip the safety cable to the cabinet’s safety bar (10) on the back of the
cabinet.
The Control 1 Pros logo can be oriented for display at 90° increments. To rotate the
logo, first gently pry the grille and gasket from the cabinet. Next, push-in the logos
fastener (found on the underside of the grille) and rotate the logo to the desired
position.
Rotating the Logo
Troubleshooting
JBL Professional 3


Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: Control 1 Pro

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL Control 1 Pro benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher JBL

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-