JBL AWC129 Bedienungsanleitung

JBL Lautsprecher AWC129

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JBL AWC129 (3 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Professional Series
Key Features:
u
Highly weather-resistant IP56 rating.
u
Consistent 90° x 9 broadband pattern control.
u
Components:
300 mm (12 in) woofer with Kevlar-reinforced
cone and 75 mm (3 in) voice coil.
25 mm (1 in) exit compression driver with
unique patented design and high temperature
polymer diaphragm.
u
Extraordinary clarity for speech, with extended
frequency response for music.
u
Advanced high-slope crossover network for
constant coverage and smooth, natural midrange.
u
400 Watt power handling (average continuous pink
noise) with high sensitivity provides high SPL
capability.
u
High-power passive crossover network.
u
Overload protection.
u
55 Hz – 20 kHz frequency response.
u
200 Watt 70V/100V multi-tap (built-in
transformer) or direct low-impedance.
Applications:
The AWC129 is a compact, coaxial-driver,
2-way, highly weather-resistant full-range
loudspeaker system which is ideal for speech and
music in a wide variety of applications, including
sports facilities, racetracks, stadiums, fairgrounds,
rodeos, skating rinks, themed entertainment
venues, cruise ships, water parks, outdoor
background music/paging systems, swimming
pools, and a wide variety of other outdoor or
indoor venue types.
The AWC129 is comprised of a high-power
coaxial 300 mm (12 in) low frequency driver and
25 mm (1 in) high frequency compression driver.
The co-axial design utilizes a unique tapered
polepiece design and transitions to the cone of
the low frequency driver as a large diameter
pattern control horn for the high frequencies,
both eliminating high-frequency beaming which
is common among this category of speaker and
extending pattern control to the lowest possible
frequencies. The result is a coaxial speaker with
wide, extremely consistent 90° coverage on a
broadband basis.
Component features include a Kevlar-reinforced
low frequency cone for reliability, well-damped
surround for smooth frequency response, high
temperature 75 mm (3 in) voice coil and a reduced
distortion design through saturated-gap magnet
geometry. The high frequency compression
driver features a unique patented design, high
temperature polymer diaphragm, and uid-cooling
for high output levels with low distortion.
The paintable enclosure is constructed of
thick ABS plus berglass and is heavily braced
to maximize low-frequency performance. The
corrosion-resistant zinc-rich extra-thick powder
coated steel grille is backed with open cell foam
and high thread-count mesh, providing excellent
protection in the harshest environments. The
system is rated IP-56, per IEC529 when installed
at minimum 5° down-tilt.
The system is equipped with a 200W 70V/100V
multi-tap transformer. Connection is made via
outdoor-rated terminals in a recessed terminal
cup. A protective terminal compartment cover
is included, along with gland nut, which forms a
water-tight seal with round-jacketed cable having
The high frequency compression driver features a
unique patented design, high temperature polymer
diaphragm, and uid-cooling for high output levels
with low distortion.
A heavy-duty weather-capable zinc-rich, thick
powder coated U-type mounting bracket is
included.
Specications:
AWC129
All-Weather Compact
2-Way Coaxial
Loudspeaker with 12 LF
System:
Frequency Range (-10 dB)1: 55 Hz – 20 kHz
Frequency Response (±3 dB)1: 80 Hz – 20 kHz
Coverage Pattern2: 90º x 90º
Directivity Factor: 10.1 (1 k – 16 kHz)
Directivity Index (DI): 9.5 dB (1 k – 16 kHz)
Long-Term System Power Rating (IEC)3: 400 W (1600 W peak), 2 hrs.
250 W (1000 W peak), 100 hrs
Sensitivity (2.83V @ 1m): 96 dB (Ave. 80 Hz – 20 kHz)
Maximum SPL4: Direct 8: 122 dB (peaks of 124 dB)
200 W Tap: 119 dB
Crossover Network: 1.5 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF,
2nd order low-pass to LF
Nominal Impedance: 8 ohms
Transformer Taps: 70V: 200W, 100W, 50W, 25W
100V: 200W, 100W, 50W
Transducers:
Low Frequency Driver: Kevlar-reinforced cone with weather treatment, 75 mm (3 in) voice coil.
High Frequency Driver: 25 mm (1 in) diaphragm and voice coil diameter, high temperature
polymer diaphragm, patented design, uid-cooling.
HF Driver Protection: Minimum audibility SonicGuard™ HF overload protection
Physical:
Enclosure: ABS with Glass enclosure, heavily braced
Attachment: Two M10 (ne-thread) points for included U-bracket. Reference torque
15 lb (20 Nm). M6 secondary safety attachment point on back panel.
Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille,
3-layer assembly with foam and woven poly mesh backing.
Input Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept
up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up
to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment
cover equipped with gland nut that forms water-tight seal with round-
jacketed cables with outside diameters between 4.0 mm (0.16”) and
9.0 mm (0.36”).
Environmental: IP56 per IEC529, with a minimum 5° downward aiming angle. Exceeds
Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM
G85 for acid-air/salt-spray (336 hrs).
Dimensions: 402 x 402 x 445 mm (15.8 x 15.8 x 17.5 in), cabinet
470 mm (18.5 in) depth including gland nut
542 mm (21.4 in) including bracket extending to back
Colors: Available in gray (similar to Pantone 420C) and black (-BK)
Net Weight: 15.9 kg (35.0 lb), 18.9 kg (41.5 lb) with U-bracket
Shipping Weight: 23.4 kg (51.5 lb)
Included Accessories: U-bracket, matches loudspeaker color (gray or black), zinc-rich extra
thick powder coated, steel.
¹ Full-space (free-eld)
² Average 1 kHz to 10 kHz
3
IEC standard, full bandwidth pink noise with 6 dB crest factor.
4
Calculated based on power rating and measured full-space sensitivity.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.
u
AWC129 All-Weather Compact 2-Way Coaxial Loudspeaker with 12 LF
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2020 JBL Professional
w w w .jb lp ro.c om
SS AWC129
10/2020
Dimensions
542
[21.4]
470
[18.5]
445
[17.5]
191
[7.5]
31 [1.2]
28
[1.21]
126 [5.0]
10.2 [R.40]
12.7 [R.50]
102 [4.0]
12.7 [R.50]
28 [1.1]
3.8
[R.15]
61 [2.4]
96 [3.8]
64
[2.5]
24
[0.9]
25
[1.0]
402
[15.8]
402 [15.8]
Bracket Rotat ional nge = ±90°Ra
90º
45º
78
[3.1]
252
[9.9]
367
[14.5]
389
[15.3]
352
[13.9]
M6 secondary sa attachment pointfety
Off-Axis Frequency ResponseFrequency Response and Impedance
20 100 1000 10000 20000
Frequency (Hz)
65
75
85
95
105
0
14
28
42
56
SPL (dB)
Ohms
20 100 1000 10000 20000
Frequency (Hz)
-30
-20
-10
0
10
Attenuation (dB)
0 deg
10 deg
20 deg
30 deg
40 deg
50 deg
60 deg
70 deg
80 deg
Directivity IndexBeamwidth
20 100 1000 10000 20000
Frequency (Hz)
0
10
20
1
10
100
Directivity Index (DI), dB
Directivity Factor (Q)
Attaching U-Bracket to Cabinet
M10 Bolt
Lock Washer
Flat Wa sher
Fr keiction Gas t
Terminal Compartment
Gland nut for round jacketed cable between 4.0mm (0.16”) and 9.0mm (0.36”) O.D.


Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: AWC129

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL AWC129 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher JBL

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-