JBL AC2212/00 Bedienungsanleitung

JBL Lautsprecher AC2212/00

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r JBL AC2212/00 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĆ¼r 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
AC2212/00
Compact 2-Way Loudspeaker
with 1 x 12" LF
Key Features:
c
100Ā° x 100Ā° Coverage.
c
PTā„¢ Progressive Transitionā„¢
Waveguide for good pattern control
with low distortion.
c
Bi-Amp/Passive Switchable.
c
Optional U-Bracket for easy installation.
c
Optional planar array frame kit
(see AE Series Array Guide).
Applications:
c
Lecture halls
c
Houses of worship
c
Corporate learning centers
c
Small performing arts facilities
c
Theatrical sound design
c
Auditoriums
c
Sports facilities
c
Themed entertainment venues
AC2212/00 is a compact 2-way full-
range loudspeaker system comprised of
one 300 mm (12 in) low frequency
driver and one 38 mm (1.5 in) exit/
44 mm (1.75 in) voice-coil compression
driver. The PT Pr essive Togr ransition
waveguide provides wide 100Ā° by 100Ā°
coverage. High-slope passive crossovers
minimize band overlap.
The cabinet is ļ¬tted with M10
threaded suspension points. Optional
U-bracket, as well as pre-engineered
array bracketry is available for easy
installation. Four threaded inserts locat-
ed on back of the enclosure allow
attachment of an Omnimountā„¢ or
similar mounting bracket.
AC2212/00 is part of JBLā€™s AE
Application Engineered Series, a
versatile family of loudspeakers for a
wide variety of ļ¬xed installation
applications.
Speciļ¬cations:
System:
Frequency Range1(-10 dB): 50 Hz ā€“ 19 kHz
Frequency Response1(Ā±3 dB): 55 Hz ā€“ 17 kHz
Coverage Patter Ā° x 100Ā°n: 100
Dir 7.1ectivity Factor (Q):
Directivity Index (DI): 8.5 dB
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover Slopes2: 4th order (24 dB/oct) Transitional HP & LP, 1.3 kHz
Transducer Power Rating (AES)3: LF: 300 W (1200 W peak), 2 hrs
250 W (1000 W peak), 100 hrs
HF: 50 W (200 W peak), 2 hrs
Long-Term System Power Rating (IEC)4: Passive mode: 250 W (1000 W peak), 100 hrs
Maximum SPL5: Bi-amp mode:
LF: 120 dB-SPL cont avg (126 dB peak)
HF: 126 dB-SPL cont avg (132 dB peak)
Passive mode:
120 dB-SPL cont avg (126 dB peak)
System Sensitivity6(1W @ 1m): Passive mode: 95 dB SPL
Transducers:
Low Frequency Driver:
1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity 6(1W @ 1m, within operational band): 95 dB SPL
High Frequency Driver: JBL 2418H-1/MTA, 38 mm (1.5 in) exit compression driver,
44 mm (1.75 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity (1W @ 1m): 109 dB SPL
Waveguide: PT-F1010HF
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior
grade 11-ply Finnish birch plywood
Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded
hardware. 4 x M8 on rear for Omnimountā„¢ 60 Series
Finish: Black DuraFlexā„¢ ļ¬nish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically trans-
parent black foam backing.
Input Connector: NL4 Neutrik SpeakonĀ®and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)
wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-
lel with barrier strip for loop-through.
Environmental Speciļ¬cations: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D): 548 x 355 x 352 mm
(21.6 x 14.0 x 13.9 in)
Net Weight: 19.1 kg (42 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
U-Bracket MTU-4
Optional planar array frame kit. See AE Series Bracket Guide
1Bi-amp mode, with recommended active tuning.
2Resultant engineered acoustical response of crossover network and components.
3AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating
plus long-term 100 hr rating are speciļ¬ed for low-frequency transducers.
4IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
5Calculated based on power rating and sensitivity, exclusive of power compression.
6Anechoic sensitivity in free ļ¬ eld, no additional sensitivity gain from boundary loading.
JBL continually engages in resear ch related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.
cAC2212/00 Compact 2-Way Loudspeaker with 1 x 12" LF
Beamwidth
Directivity Index, Q
Horizontal Off-Axis Frequency Response
Vertical Up Off-Axis Frequency Response
Vertical Down Off-Axis Frequency ResponseDimensions
Dimensions in mm (in)
For more detailed dimensional information, refer to Application Data Sheet
Measurements obtained in full passive crossover mode with no signal
processing. Graphs are from unaltered measured data.
Horizontal 1/3 Octave Polars


Produktspezifikationen

Marke: JBL
Kategorie: Lautsprecher
Modell: AC2212/00

Brauchst du Hilfe?

Wenn Sie Hilfe mit JBL AC2212/00 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher JBL

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĆ¼r -Kategorien-