Janome 419S Bedienungsanleitung

Janome Nähmaschine 419S

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Janome 419S (34 Seiten) in der Kategorie Nähmaschine. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/34

Models 419S & 423S

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions should always be followed, including the followings:

Read all instructions before using this appliance.

DANGER –To reduce the risk of electric shock:

1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the

electric outlet immediately after using and before cleaning.

2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 15 Watts.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near

children.

2. Use this appliance only for its intended use as described in this manual.

Use only attachments recommended by the manufacturer as contained in this manual.

3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been

dropped or damaged, or dropped into water.

Return this sewing machine to the nearest authorized dealers or service center for examination, repair,

electrical or mechanical adjustment.

4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine

and foot control free from accumulation of lint, dust and loose cloth.

5. Never drop or insert any object into any opening.

6. Do not use outdoors.

7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

8. To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.

9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

11. Always use the proper needle plate. The wrong plate can cause the needle to break.

12. Do not use bent needles.

13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.

14. Switch this sewing machine off ("O") when making any adjustment in the needle area, such as threading the

needle, changing the needle, threading the bobbin or changing the presser foot, and the like.

15. Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or when

making any other adjustments mentioned in this manual.

SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

SECTION 1. ESSENTIAL PARTS

Name of Parts .................................................................................................................................... 2

SECTION 2. GETTING READY TO SEW

Extension Table ................................................................................................................................. 3

Standard Accessories ........................................................................................................................ 3

Accessory Storage Box ..................................................................................................................... 3

Connecting the Machine to the Power Supply ................................................................................... 4

Foot Control ....................................................................................................................................... 4

Presser Foot Lifter ............................................................................................................................. 5

To Attach and Remove the Presser Foot .......................................................................................... 5

Presser Foot Pressure Adjusting Dial ................................................................................................ 5

Changing Needle ............................................................................................................................... 6

To check the needle ...................................................................................................................... 6

Thread and Needle Chart .................................................................................................................. 6

Setting Spool Pins ............................................................................................................................. 7

Removing or Inserting the Bobbin Case ............................................................................................ 7

Winding the Bobbin ............................................................................................................................ 8

Threading Bobbin Case ..................................................................................................................... 8

Threading the Machine ...................................................................................................................... 9

Needle Threader ................................................................................................................................ 10

Drawing Up Bobbin Thread ............................................................................................................... 10

Balancing Needle Thread Tension .................................................................................................... 11

Pattern Selector Dial .......................................................................................................................... 12

Stitch Length Control ......................................................................................................................... 12

Stitch Width Control ........................................................................................................................... 12

Reverse Stitch Button ........................................................................................................................ 13

Dropping the Feed Dog ..................................................................................................................... 13

SECTION 3. BASIC SEWING

Straight Stitch Sewing ........................................................................................................................ 14

To Change Sewing Direction ............................................................................................................. 14

Seam Guides Line ............................................................................................................................. 15

Variable Needle Position ................................................................................................................... 15

Zigzag Stitching ................................................................................................................................. 16

SECTION 4. UTILITY STITCHING

Overcasting ........................................................................................................................................ 16

Tricot Stitch ........................................................................................................................................ 17

Knit Stitch ........................................................................................................................................... 17

Straight Stretch Stitch ........................................................................................................................ 18

Sewing on Buttons ............................................................................................................................. 19

Buttonhole .......................................................................................................................................... 20–21

To adjust buttonhole stitch density ................................................................................................. 21

Corded Buttonhole ............................................................................................................................. 22

Zipper Application .............................................................................................................................. 23

Blind Stitch Hemming ........................................................................................................................ 24

Rolled Hem ........................................................................................................................................ 25

SECTION 5. DECORATIVE STITCHING

Shell Tuck .......................................................................................................................................... 26

Stretch Stitch Patterns ....................................................................................................................... 26

Smocking ........................................................................................................................................... 27

Box Stitching ...................................................................................................................................... 27

Applique ............................................................................................................................................. 28

Decorative Satin Stitch Patterns ........................................................................................................ 28

SECTION 6. CARE OF YOUR MACHINE

Dismantling and Assembling Hook Race Unit ................................................................................... 29

Cleaning the Feed Dog ...................................................................................................................... 29

Oiling the Machine ............................................................................................................................. 30

Oiling behind the face plate ............................................................................................................ 30

Oiling the shuttle hook area ............................................................................................................ 30

Sewing Light ...................................................................................................................................... 30

Troubleshooting ................................................................................................................................. 31