Janome 1100D Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Janome 1100D (26 Seiten) in der Kategorie Nähmaschine. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/26
1
TO CHANGE THE FRONT FLAP (LOOPER COVER) AND BASE COVER................................2
TO CHANGE THE BACK COVER AND LEFT FRONT COVER..................................................3
TO CHANGE THE FRONT COVER AND INSIDE COVER..........................................................4
GAUGE FOR MECHANICAL ADJUSTMENT..............................................................................5
TO ADJUST THE HEIGHT AND ORIENTATION OF THE NEEDLE BAR...................................6
TO ADJUST THE HEIGHT OF THE PRESSER FOOT................................................................7
TO ADJUST THE CLEARANCEBETWEEN THE FEED DOG AND NEEDLE PLATE.................8
TO ADJUST THE HEIGHT OF THE FEED DOG.........................................................................9
TO ADJUST THE TIMING AND HEIGHT OF THE MOVING BLADE (UPPER KNIFE)..............10
TO ADJUST THE HORIZONTAL FEED TIMING.......................................................................11
TO ADJUST THE LOWER LOOPER TIMNG.............................................................................12
TO ADJUST THE CLEARANCE AND TIMING OF THE LOWER LOOER.................................13
TO ADJUST THE THE CLEARANCE BETWEEN THE NEEDLE GUARD AND NEEDLES......14
TO ADJUST THE POSITION OF THE UPPER LOOPER..........................................................15
TO ADJUST THE CLEARANCE AND TIMING OF
THE UPPER LOOPER AND LOWER LOOPER........................................................................16
TO ADJUST THE LOER LOOPER THREAD GUIDE.................................................................17
TO ADJUST THE HEIGHT OF THE UPPER LOOPER TAKE UP LEVER.................................18
TO ADJUST THE DEFFERENTIAL FEED.................................................................................19
TO ADJUST THE CUTTING WIDTH.........................................................................................20
TO ADJUST THE TENSION UNIT.............................................................................................21
TO ADJUST THE THE PROGRAM DISPLAY...........................................................................22
TO ADJUST THE MOTOR BELT TENSION.............................................................................23
TO CHANGE THE MOTOR.......................................................................................................24
TO CHANGE THE WIRED TB/SW UNIT...................................................................................25
PARTS LIST..............................................................................................................................26
TABLE OF CONTENTS
2
TO CHANGE THE FRONT FLAP (LOOPER COVER)
AND BASE COVER
1. Remove the setscrews A and remove the FRONT FLAP (looper cover).
2. Remove the setscrews B and remove the base cover.
MODEL 1100D
To remove:
+
A
+
A
A
B
To attach:
3. Follow the above procedure in reverse.


Produktspezifikationen

Marke: Janome
Kategorie: Nähmaschine
Modell: 1100D

Brauchst du Hilfe?

Wenn Sie Hilfe mit Janome 1100D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nähmaschine Janome

Bedienungsanleitung Nähmaschine

Neueste Bedienungsanleitung für -Kategorien-