Jamo 6.5CS T Set Bedienungsanleitung

Jamo Lautsprecher 6.5CS T Set

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Jamo 6.5CS T Set (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

In-Ceiling speakers

WARNING: Improper installation of the speaker could result in amplifier damage. Read all

instructions before installation.

Placement

Make certain the speaker is located between ceiling joists to avoid cutting into joists. Place the

supplied template a minimum of 5/8 from any joists. Draw a line around it to mark the cutout.

Take care when cutting the hole to avoid cutting into pipes or electrical conduits. If you encounter

pipes, electrical conduits or other obstacles you may have to select another location for the

speaker.

Installation

Before installing the speaker connect the speaker wires as described under Hookup.

Remove the grill from the speaker. First loosen screws A (fig. 1) by turning them counter clockwise.

Loosen all 4 screws until the Dog ears B (fig. 2) can move freely. Do not remove the screws.

Install the speaker into the ceiling and position it. Turn screws A clockwise until they are tightened

and the frame firmly installed.

Before reinstalling the grill on the speaker make adjustments as described under Adjustments.

Reinstall the grill. If the grill has a loose fit and/or is vibrating when the speaker is playing remove

the grill, install the supplied non-curing glue strips at locations C (fig. 1) and reinstall the grill.

Hookup

The receiver/amplifier must be turned OFF before you connect the speakers or it may cause

damage to the receiver/amplifier.

Connect the speaker wires from the receiver/amplifier to the speakers. When connecting the

speaker wires make sure that LEFT (L) is connected to LEFT (L), RIGHT (R) to RIGHT (R), POSITIVE

(+) to POSITIVE (+) and NEGATIVE (-) to NEGATIVE (-). If terminals are color coded, RED is POSI-

TIVE (+) and BLACK is NEGATIVE (-).

For dual voice coil models (designated by DVC in model number) connect LEFT (L) to one side

and RIGHT (R) to other side of speaker.

Adjustments

The tweeter can be tilted towards the listening area, due to high frequencies being more

directional than low frequencies. The impedance of the speaker and the level of the tweeter are

adjustable except on DVC models. Both adjustments are located on the front of the frame.

IMPEDANCE:

The factory setting is 8 ohm. If the receiver/amplifier specifies a minimum

impedance of 4 ohm, the speaker may be switched to the 4 ohm posi-

tion. This will make the speaker play louder. When installing more then 1

pair of speakers to a receiver/amplifier special care should be taken to impedance matching the

speakers to the receiver/amplifier. This may require impedance matching devices. Consult your

dealer for information regarding impedance matching.

TWEETER LEVEL:

The factory setting is 0 dB. The level of the tweeter can be lowered

by 3 or 6 dB to suite individual tastes in different room

environments. Experiment with the settings to find the preferred sound.

Custom painting

The grill and frame may be painted to match your decor. Paint the grill and frame separately

before mounting to the wall. After painting the grill blow air through the holes to prevent

clogging. The speaker is supplied with a sheet of acoustically transparent foam. This may be

inserted behind the grill so the holes look less dark.

Maintenance

All Jamo loudspeakers are made of modern thoroughly tested materials, which will usually require

no maintenance, other then dusting or drying with a soft, dry cloth. If the loudspeakers have

become greasy, the grease may be removed by moistening the cloth with water and possible

using a mild detergent.

NOTE

Never use any scouring powder, household cleansers or any other solvents for cleaning the

loudspeaker.

Produktspezifikationen

Marke:	Jamo
Kategorie:	Lautsprecher
Modell:	6.5CS T Set
Gewicht:	1100 g
Produktfarbe:	Weiß
Impedanz:	8 Ohm
Höhe:	70 mm
RMS-Leistung:	50 W
Equalizer:	Nein
Betriebsanleitung:	Ja
Audio Kanäle:	2.0 Kanäle
Anzahl des Antriebs:	2
Treiberdurchmesser:	165 mm
Frequenzbereich:	75 - 22000 Hz
Woofer:	Ja
Tieftönerdurchmesser (imperial):	0.5 "
Schnellinstallationsanleitung:	Ja
Durchmesser:	227 mm
Lautsprecherplatzierung:	Deckenmontage möglich
Subwoofer-Treiberdurchmesser (imperial):	6.5 "
Empfindlichkeit:	88 dB
Lautsprechertyp:	2-Wege
Musik Energie:	100 W
Für die Nutzung im Außenbereich geeignet:	Nein
Tieftönerdurchmesser:	13 mm