Jamo 626K4 Bedienungsanleitung

Jamo Lautsprecher 626K4

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Jamo 626K4 (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
In-Wall speakers
WARNING: Improper installation of the speaker could result in amplifier damage. Read all
instructions before installation.
Placement
Make certain the speaker is located between wall studs to avoid cutting into studs. Place the
supplied template a minimum of 5/8 from any studs. Level it and draw a line around it to mark
the cutout. Take care when cutting the hole to avoid cutting into pipes or electrical conduits. If
you encounter pipes, electrical conduits or other obstacles you may have to select another
location for the speaker.
Installation
First install the frame. Loosen screws A (fig. 1) by turning them counter clockwise. Loosen all 4
screws until the Dog ears B (fig. 2) can move freely. Do not remove the screws. Install the frame
into the wall and level it (notice TWEETER and WOOFER markings on the frame). Turn screws A
clockwise until they are tightened and the frame is firmly installed.
Next install the speaker into the frame. Before installing the speaker connect the speaker wires
as described under Hookup and set the impedance switch to the desired position (see
Adjustments). Remove the grill from the speaker. Place the speaker into the frame and secure
with the 6 screws supplied.
Before reinstalling the grill on the speaker make tweeter level adjustments as described under
Adjustments. Reinstall the grill. If the grill has a loose fit and/or is vibrating when the speaker is
playing remove the grill, install the supplied non-curing glue strips at locations C (fig. 1) and
reinstall the grill.
Hookup
The receiver/amplifier must be turned OFF before you connect the speaker or it may cause dam-
age to the amplifier.
Connect the speaker wires from the receiver/amplifier to the speakers. When connecting the
speaker wires make sure that LEFT (L) is connected to LEFT (L), RIGHT (R) to RIGHT (R), POSITIVE
(+) to POSITIVE (+) and NEGATIVE (-) to NEGATIVE (-). If terminals are color coded, RED is POSI-
TIVE (+) and BLACK is NEGATIVE (-).
Adjustments
The tweeter can be tilted towards the listening area, due to high frequencies being more
directional than low frequencies. The impedance of the speaker and the level of the tweeter are
adjustable.
IMPEDANCE:
Located on the crossover on the back. The factory setting is 8 ohm. If the
receiver/amplifier specifies a minimum impedance of 4 ohm, the speaker
may be switched to the 4 ohm position. This will make the speaker play
louder. When installing more then 1 pair of speakers to a receiver/amplifier
special care should be taken to impedance matching the speakers to the
receiver/amplifier. This may require impedance matching devices. Con-
sult your dealer for information regarding impedance matching.
TWEETER LEVEL:
Located on the front baffle. The factory setting is 0 dB. The level of the
tweeter can be lowered by 3 or 6 dB to suite individual tastes in different
room environments. Experiment with the settings to find the preferred
sound.
Custom painting
The grill and frame may be painted to match your decor. Paint the grill and frame separately
before mounting to the wall. After painting the grill blow air through the holes to prevent
clogging. The speaker is supplied with a sheet of acoustically transparent foam. This may be
inserted behind the grill so the holes look less dark.
Maintenance
All Jamo loudspeakers are made of modern thoroughly tested materials, which will usually require
no maintenance, other then dusting or drying with a soft, dry cloth. If the loudspeakers have
become greasy, the grease may be removed by moistening the cloth with water and possible
using a mild detergent.
NOTE:
Never use any scouring powder, household cleansers or any other solvents for cleaning the
loudspeaker.

Produktspezifikationen

Marke: Jamo
Kategorie: Lautsprecher
Modell: 626K4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Jamo 626K4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher Jamo

Jamo

Jamo D600 Bedienungsanleitung

24 August 2024
Jamo

Jamo DS7 - Digital Bedienungsanleitung

24 August 2024
Jamo

Jamo s 608 om Bedienungsanleitung

23 August 2024
Jamo

Jamo Jamo C 80 Bedienungsanleitung

22 August 2024
Jamo

Jamo DS3 - Digital Bedienungsanleitung

22 August 2024
Jamo

Jamo S 428 HCS 3 Bedienungsanleitung

22 August 2024
Jamo

Jamo S 608 HCS 3 Bedienungsanleitung

22 August 2024
Jamo

Jamo S 25 Bedienungsanleitung

21 August 2024
Jamo

Jamo DS4 - Digital Bedienungsanleitung

20 August 2024
Jamo

Jamo DS1 - Digital Bedienungsanleitung

20 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024