Jam Alloy HX-P560 Bedienungsanleitung

Jam Ladestation/Dockingstation Alloy HX-P560

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Jam Alloy HX-P560 (3 Seiten) in der Kategorie Ladestation/Dockingstation. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
60
124
68
HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P560
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P560)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA: www.jamaudio.com/customer-support/product-registration
CAN: canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge
them using your computer or a wall outlet. The Alloy needs about 4 hours for up to 5 hours of party time.
The LED light on your speaker lets
you know what it’s doing.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH® CONNECTION – IT’S A SETUP
Like any amazing couple, this one starts with a connection — one between
your device and the speaker’s . Here’s how it works:Bluetooth
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has .Bluetooth
2. Turn on the speaker (press and hold the power button for 3 seconds) and
look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Alloy in your device’s list or click YES. Bluetooth
USA
cservice@jamaudio.com
1.888.802.0040
8:30am–7:00pm EST M–F
cservice@homedicsgroup.ca
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
Thank you for purchasing
the . Check JAM Alloy
out the sections below
for all the important
information about your
new speaker.
Pairing Mode
Connected Charging
Ready to PartyAux-In Mode
Low Battery
Continued on page 2.
AC adaptor not included.
Back:
Bottom:
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
BluetoothÂŽ
Devices
JAM Alloy
on
>
3s
or
4h
1. Turn the music down (press and hold for
3 seconds to move to the previous track)
2. Push it to play, push it again to pause
3. Turn the music up (press and hold for 3
seconds to skip to the next track)
4. Shed some light on what your speaker is
doing (see chart to the right for details)
5. Toggle between languages here
6. The power cord goes here
7. Here’s where you hook it up old-school
8. This is the power button
9. Language selector pin
2
1
3
4
5 6 7
8
9
HELLO? SPEAKERPHONE? YES!
BLUETOOTHÂŽ CONNECTION, CONTINUED
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and will nd each other every time, as long as the Bluetooth
speaker is set to and your device’s is, you know, on.Bluetooth Bluetooth
If you’re connecting to a computer, you may have some extra steps on that
end. You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If
prompted, enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and
hold the PLAY/PAUSE button for 6 seconds to activate pairing mode.
Note: If you turn on your Alloy but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the Jam Alloy will automatically shut off to preserve battery power.
When friends call asking to join the party — and you know they will — answer the phone without disconnecting from your JAM Alloy.
Yes, that’s right. Your speaker is a speakerphone, too. How amazing is that? Here’s how it works:
1. Make sure your phone and speaker are connected through .Bluetooth
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Alloy.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Alloy for 3 seconds to ignore the call.
THE COOLEST PART: The Alloy knows when a call is coming in and pauses the music before ringing. When you hang up, the music
starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the Alloy automatically
does its hands-free thing. Isn’t it refreshing to know your speaker totally gets you?
Check out the chart below for a complete guide on handling calls with your Alloy.
COMING CLEAN
A soft, dry towel is all you need to
clean off your speaker. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don’t do it.
HOOKING UP OLD-SCHOOL AUDIO, JACK
1. Plug one end of the cord into the speaker
and the other into the headphone jack on
your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up —
or down if you’re lame.
You’ll have to play and pause the music from
your device, not your speaker. No problem.
You’re there anyway, right?
1 YEAR LIMITED WARRANTY
THE VOICE FROM WITHIN
When your JAM Alloy isn’t rocking out, it can tell you all sorts
of things it’s doing: when it’s powering on, ready to pair,
paired, at maximum volume, charging, recieving a call, ending
a call, rejecting a call, and powering off.
Just like the global gadget it is, your speaker toggles between
several languages or no language at all. Your speaker can
parlay with you in English, Spanish, French, or Portuguese.
Making the change between language and tone is as simple
as poking a paperclip, safety pin, or the included language
selector pin into the small hole on the back of the speaker.
Click though until the speaker starts speaking your language.
For detailed warranty instructions and information visit:
USA: www.jamaudio.com/customer-support/warranty-1yr
CAN: canada.jamaudio.com/warranty-1yr
To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email
for assistance (you can nd their contact info on page 1).
Please make sure to have the model number of the
product available.
2m 15m
Situation
Short Press Play/Pause Button Long Press Play/Pause Button
1
st
Incoming call
2
nd
Incoming call
On call
Both calls active
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
Reject call
Move call from speaker to device
Reject call 2
Switch between 1st call and 2nd call
STUFF THE GOVERNMENT MAKES US SAY STUFF OUR LAWYERS MAKE US SAY
A MESSAGE FROM THE ENVIRONMENT
FCC Compliance:
Note: This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modications not expressly approved by HMDX
could void the user's authority to operate this equipment.
IC Caution: RSS-GEN Issue 4 November 2014
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
IMPORTANT SAFEGUARDS:
When using an electrical product, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
• WARNING: Do not place speakers too close to ears. May cause
damage to eardrums, especially in young children.
• Use this product only for its intended use as described in this
manual. Do not use attachments not recommended by HMDX.
• HMDX is not liable for any damage caused to smartphones,
iPod/MP3 players, or any other device.
• Do not place or store this product where it can fall or be dropped
into a tub or sink.
• Do not place or drop into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable,
or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surface wet from water or
cleaning solvents.
Attention California Residents:
WARNING: This product contains chemicals known to the State
of California to cause cancer, birth defects, and other
reproductive harm.
WARNING:
This product has an internal, non-replaceable lithium battery. Please
dispose in accordance with your local, state, province, and country
guidelines.
This product contains small parts that may present a choking hazard
for young children.
CAUTION: All servicing of this product must be performed by
authorized HMDX Service Personnel only.
Š2015 HMDX. All Rights Reserved.
IB-HXP560 BC

Produktspezifikationen

Marke: Jam
Kategorie: Ladestation/Dockingstation
Modell: Alloy HX-P560

Brauchst du Hilfe?

Wenn Sie Hilfe mit Jam Alloy HX-P560 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Ladestation/Dockingstation Jam

Jam

Jam Splash Bedienungsanleitung

5 Oktober 2024
Jam

Jam Thrill HX-P320 Bedienungsanleitung

4 Oktober 2024
Jam

Jam Touch HX-P550 Bedienungsanleitung

15 August 2024
Jam

Jam Replay HX-P250 Bedienungsanleitung

4 August 2024
Jam

Jam Party Bedienungsanleitung

2 August 2024
Jam

Jam Chill Out HX-P202 Bedienungsanleitung

31 Juli 2024
Jam

Jam Symphony HX-W14901 Bedienungsanleitung

29 Juli 2024
Jam

Jam Classic 2.0 HX-P190 Bedienungsanleitung

28 Juli 2024
Jam

Jam XT Bedienungsanleitung

25 Juli 2024
Jam

Jam Trance Plus HX-P930 Bedienungsanleitung

24 Juli 2024

Bedienungsanleitung Ladestation/Dockingstation

Neueste Bedienungsanleitung fĂźr -Kategorien-

Polk

Polk BOOM Bit Bedienungsanleitung

16 Oktober 2024
Vorago

Vorago KSP-600 Bedienungsanleitung

8 Oktober 2024
IDance

IDance Mini Blaster 2L Bedienungsanleitung

7 Oktober 2024
Aukey

Aukey SK-S1 Bedienungsanleitung

3 Oktober 2024
Rapoo

Rapoo A500 Bedienungsanleitung

2 Oktober 2024
Gembird

Gembird DD-U3M2 Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS02UF Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS01UF Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS04UF Bedienungsanleitung

1 Oktober 2024
Urban Factory

Urban Factory HCS03UF Bedienungsanleitung

1 Oktober 2024