ISDT NP2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ISDT NP2 (10 Seiten) in der Kategorie Ladegerät. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
OQ3杶镾擄翄鏍懲羮㛺暺
OQ3!Tnbsu!Dibshfs!Jotusvdujpo!Nbovbm
Thank you for purchasing the ISDT NP2 smart battery
charger which is compatible with the SONY NP-BX1,
NP-FZ100 and NP-FW50 battery types. The charger is
equipped with a wide viewing angle LCD screen which can
display the status of the charging process and battery
parameters in detail.
The two independent charging channels can charge batteries
of different types simultaneously. The ISDT NP2 can also
identify the battery model and automatically adapt to the
optimal charging parameters and algorithm.
Safety Precautions
Please read these instructions and warnings before using
this product:
1. Keep the charger away from sources of heat and damp
environments during use. Ventilation is necessary for heat
dissipation.
2. Please do not allow children to operate the charger.
3. Do not attempt to charge incompatible batteries with
this battery charger. Attempting to do so as can cause
damage to the charger or battery, or even result in
disastrous consequences;
1. Channel 1 operation key
2. Channel 2 operation key
3. Channel 1 battery slot
4. Channel 2 battery slot
5. LCD display screen
6. USB Type-C power supply input port
Charger Specification
Model type: NP2
Power supply input port: USB Type-C
Input voltage: 5~12V
Compatible USB adapter: 5V/1.0A 5V/2.0A QC 2.0/3.0, ,
Max charge current: 1.5A /Slot
Max input power: 18W
Charging mode: normal mode/quick mode
Compatible battery type: NP-FZ100,NP-FW50,NP-BX1
Display: 240 x 240 IPS LCD
Working temperature: 0 - 40℃ ℃
Size: (L x W x H) 112 x 91 x 33.5mm
Weight:115g
Operation Instruction
In this charger, two batteries can be charged in different
modes in various combinations.
1. Connect the USB type-C cable and USB power adapter,
then the NP2 will be ready for charging. NP2 supports a
variety of USB power adapters and automatically identifies
and matches the input power.
English | 01
1
5
3
6
4
2
2. Insert batteries into the battery slot as shown below. The
NP2 supports mixed charging of different types of batteries
and can automatically identify and adjust charging
parameters.
3. After correctly inserting a battery, the charger will beep and
sound the prompt tone. Default charging mode will start
automatically without setup. To enter Fast Charging mode, press
the channel operate button for a few seconds and the selected
channel will switch into fast charging mode. Please note that the
actual charging current is limited by the output wattage of the
USB adaptor. The maximum input wattage is 18W when using a
standard adaptor which supports QC 2.0/3.0. It can automatically
allocate a maximum 75% wattage after the channel has been
activated in fast charging mode.
Insertion diagram for NP-FZ100
Insertion diagram for NP-FW50
Insertion diagram for NP-BX1
English | 02
NP-FZ100 NP-FZ100
NP-FW50 NP-FW50
NP-BX1 NP-BX1


Produktspezifikationen

Marke: ISDT
Kategorie: Ladegerät
Modell: NP2

Brauchst du Hilfe?

Wenn Sie Hilfe mit ISDT NP2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ladegerät ISDT

Bedienungsanleitung Ladegerät

Neueste Bedienungsanleitung für -Kategorien-