Intellinet Wireless B Router 523233 Bedienungsanleitung

Intellinet Router Wireless B Router 523233

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Intellinet Wireless B Router 523233 (20 Seiten) in der Kategorie Router. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/20

802.11b Wireless Router

User Manual

FCC Certifications

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. The equipment version marketed in US is restricted to usage of the channels 1-11

only. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End

users must follow the specific operating instructions for satisfying RF exposure compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

The equipment version marketed in US is restricted to usage of the channels 1-11 only

CE Mark Warning

This equipment complies with the requirements relating to electromagnetic compatibility, EN55022 class B for

ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of

the Member States relating to electromagnetic compatibility.

Company has an on-going policy of upgrading its products and it may be possible that information in this

document is not up-to-date. Please check with your local distributors for the latest information. No part of this

document can be copied or reproduced in any form without written consent from the company.

Trademarks:

All trade names and trademarks are the properties of their respective companies.

Document Version: 2.0

Table of Contents

Unpacking Information············································································· 1

Introduction To Wireless Router ······························································ 2

General Description················································································· 2

Key Features ························································································· 3

The Front Panel······················································································ 4

System LEDs ················································································· 4

Port LEDs (WAN)············································································ 4

Port LEDs (LAN) ············································································· 4

Port LEDs (Wireless) ······································································· 5

Factory Setting button······································································ 5

The Rear Panel ······················································································ 6

Power Connection ··········································································· 6

Placement (Optional) ······································································· 6

Installing And Using Wireless Router······················································ 8

Network configuration setup··································································· 8

Computer configuration setup································································· 9

Wireless Router configuration setup······················································ 14

Status························································································ 15

Wireless····················································································· 17

TCP/IP Setting············································································ 24

Firewall Configuration·································································· 29

Syslog ······················································································· 33

Statistics···················································································· 34

Upgrade Firmware ······································································ 34

Save and Reload ········································································ 35

Password··················································································· 35

Product Specifications ··········································································· 36

Appendix································································································· 37

Unpacking Information

Thank you for purchasing the Wireless Router. Before you start, please check all the

contents of this package.

The product package should include the following:

1. One Wireless Router

2. One power adapter

3. One User Manual (CD)

4. One QIG

5. Stand and Screws (Optional)

Introduction To Wireless Router

General Description

The Wireless Router built-in with 4-port 10/100Mbps Fast Ethernet Switch

is the latest generation of Wireless router product for Home/Office and SOHO

users who are thirsting high speed Internet access. This full-feature and

self-contained compact Wireless Router will be fully for broadband access in

both of LAN and Wireless environment. This device has been specifically

designed to provide LAN and Wireless users the most cost-effective method with

multiple accesses to the Internet at the cost of a single public IP address（IP

Sharing）and enjoy the true Plug-and-Play installation. Moreover, the built-in

4-port 10/100Mbps switch lets users plug the network cable into the device

without buying additional switch.

This device is also an Access Point. It has a built-in wireless LAN. Users

can connect to Internet using wireless network interfaces anywhere within the

range of its radio transmission. It’s idea for SOHO users who require instant and

convenient access to Internet without the restriction of connecting cables.

The friendly WEB-based graphics interface for setup makes any

inexperienced users soon enter plug-and–play operation. Embedded DHCP

server simplified IP address management and no MIS people needed for daily

technical services. What is more, NAT/firewall is also implemented on this

compact Router Box for protecting whole LAN from outside attack.

Key Features

The switch provides the following key features:

- Complies with 10BASE-T specifications of IEEE802.3 standard

- Complies with 100BASE-TX specifications of IEEE802.3u standard

- Complies with IEEE802.3x full duplex operation and flow control

- 4 * RJ-45 ports for 100BASE-TX and 10BASE-T connectivity on LAN side

- 1 * WAN port on WAN side

- Friendly GUI offers painless setup and management

- LAN/WAN management via WEB-Based management interface

- Supports DHCP client/server function

- Supports N-Way Auto-Negotiation on each LAN and WAN port

- Supports PPPoE protocol

- Supports NAT/NAPT function

- Supports Port, IP and MAC filtering, Port Forwarding and

Virtual DMZ (Firewall);

WEP and WPA (Wireless)

- Supports extensive LED indicators for network diagnostics

- External power adapter

- FCC CLASS B, CE

- Built-in 11Mbps IEEE802.11b wireless LAN Access Point

- An instant LAN with an integrated 4 ports 10/100Mbps switch

Produktspezifikationen

Marke:	Intellinet
Kategorie:	Router
Modell:	Wireless B Router 523233
WLAN-Standards:	802.11b
Gewicht:	- g
Produktfarbe:	Schwarz
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Netzstandard:	IEEE 802.11b,IEEE 802.3,IEEE 802.3u
Unterstützte Sicherheitsalgorithmen:	128-bit WEP,64-bit WEP,802.1x RADIUS,WEP,WPA
Unterstützte Netzwerkprotokolle:	PPPoE, DHCP, NAT/NAPT
Eingebauter Ethernet-Anschluss:	Ja
Schnittstellentyp Ethernet-LAN:	Schnelles Ethernet
Zertifizierung:	FCC, CE
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	4
Ethernet LAN Datentransferraten:	10,100 Mbit/s
Anzahl der Antennen:	1
LED-Anzeigen:	LAN,Link,Power,Y
Frequenzbereich:	2.1GHz
Web-basiertes Management:	Ja
Abmessungen (BxTxH):	127 x 96 x 30 mm
Top WLAN-Standard:	802.11b
Eingangsspannung:	12 V
Filterung:	Ja
Eingangsstrom:	0.5 A
Ethernet-WAN:	Ja
Verkabelungstechnologie:	10/100Base-T(X)
MAC Adressen Filtern:	Ja
DHCP-Client:	Ja
DHCP-Server:	Ja
Modulation:	DSSS
Datenübertragungsgeschwindigkeit WLAN:	1,2,5.5,11 Mbit/s
xDSL-Verbindung:	Ja
NEtzwerkadressenübersetzung (NAT):	Ja
Netzwerkfunktionen:	Schnelles Ethernet
Antenne Steckertyp:	RP-SMA