Indesit IWC 8125 B Bedienungsanleitung

Indesit Waschmaschinen IWC 8125 B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Indesit IWC 8125 B (72 Seiten) in der Kategorie Waschmaschinen. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/72
GB
1
Contents
Installation, 2-3
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Description of the washing machine
and starting a wash cycle, 4-5
Control panel
Indicator lights
Starting a wash cycle
Wash cycles, 6
Table of wash cycles
Personalisation, 7
Setting the temperature
Setting the spin speed
Functions
Detergents and laundry, 8
Detergent dispenser drawer
Bleach cycle
Preparing the laundry
Garments requiring special care
Load balancing system
Precautions and tips, 9
General safety
Disposal
Care and maintenance, 10
Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Troubleshooting, 11
Service, 12
IWC 8125
Instructions for use
WASHING MACHINE
English,1
GB
Português,25
PT
Français,13
F
AR
, 37
FA
,49 Español,61
ES
2
GB
Installation
This instruction manual should be kept in a safe
place for future reference. If the washing machine is
sold, transferred or moved, make sure that the
instruction manual remains with the machine so that
the new owner is able to familiarise himself/herself
with its operation and features.
Read these instructions carefully: they contain vital
information relating to the safe installation and
operation of the appliance.
Unpacking and levelling
Unpacking
1. Remove the washing machine from its packaging.
2. Make sure that the washing machine has not been
damaged during the transportation process. If it has
been damaged, contact the retailer and do not
proceed any further with the installation process.
3. Remove the 4
protective screws (used
during transportation) and
the rubber washer with
the corresponding
spacer, located on the
rear part of the appliance
(see figure).
4. Close off the holes using the plastic plugs provided.
5. Keep all the parts in a safe place: you will need
them again if the washing machine needs to be
moved to another location.
Packaging materials should not be used as toys for
children.
Levelling
1. Install the washing machine on a flat sturdy floor,
without resting it up against walls, furniture cabinets
or anything else.
2. If the floor is not
perfectly level, compen-
sate for any unevenness
by tightening or loosening
the adjustable front feet
(see figure); the angle of
inclination, measured in
relation to the worktop,
must not exceed 2°.
Levelling the machine correctly will provide it with
stability, help to avoid vibrations and excessive noise
and prevent it from shifting while it is operating. If it is
placed on carpet or a rug, adjust the feet in such a
way as to allow a sufficient ventilation space
underneath the washing machine.
Connecting the electricity and water
supplies
Connecting the water inlet hose
1. Connect the supply
pipe by screwing it to a
cold water tab using a ¾
gas threaded connection
(see figure).
Before performing the
connection, allow the
water to run freely until it
is perfectly clear.
2. Connect the inlet hose
to the washing machine
by screwing it onto the
corresponding water inlet
of the appliance, which is
situated on the top right-
hand side of the rear part
of the appliance (see
figure).
3. Make sure that the hose is not folded over or bent.
The water pressure at the tap must fall within the
values indicated in the Technical details table (see
next page).
If the inlet hose is not long enough, contact a
specialised shop or an authorised technician.
Never use second-hand hoses.
Use the ones supplied with the machine.
GB
3
Technical data
Model IWC 8125
Dimensions
width 59.5 cm
height 85 cm
depth 60 cm
Capacity from 1 to 8 kg
Electrical
connections
please refer to the technical data
plate fixed to the machine
Water connections
maximum pressure 1 MPa (10 bar)
minimum pressure 0.05 MPa (0.5 bar)
drum capacity 62 litres
Spin speed up to 1200 rotations per minute
Energy rated
programmes
according to
regulation
EN 60456
programme 2; temperature 60°C;
using a load of 8 kg.
This appliance conforms to the
following EC Directives:
- 89/336/EEC dated 03/05/89
(Electromagnetic Compatibility) and
subsequent modifications
- 2002/96/EC
- 2006/95/EC Low Voltage)
65 - 100 cm
Connecting the drain hose
Connect the drain hose,
without bending it, to a
drainage duct or a wall
drain located at a height
between 65 and 100 cm
from the floor;
alternatively, rest it on
the side of a washbasin
or bathtub, fastening the
duct supplied to the tap
(see figure). The free end
of the hose should not
be underwater.
We advise against the use of hose extensions; if it is
absolutely necessary, the extension must have the
same diameter as the original hose and must not
exceed 150 cm in length.
Electrical connections
Before plugging the appliance into the electricity
socket, make sure that:
the socket is earthed and complies with all
applicable laws;
the socket is able to withstand the maximum power
load of the appliance as indicated in the Technical
data table (see opposite);
the power supply voltage falls within the values
indicated in the Technical data table (see opposite);
the socket is compatible with the plug of the
washing machine. If this is not the case, replace
the socket or the plug.
The washing machine must not be installed
outdoors, even in covered areas. It is extremely
dangerous to leave the appliance exposed to rain,
storms and other weather conditions.
When the washing machine has been installed, the
electricity socket must be within easy reach.
Do not use extension cords or multiple sockets.
The cable should not be bent or compressed.
The power supply cable must only be replaced by
authorised technicians.
Warning! The company shall not be held responsible
in the event that these regulations are not respected.
The first wash cycle
Once the appliance has been installed, and before
you use it for the first time, run a wash cycle with
detergent and no laundry, using the wash cycle 2.

Produktspezifikationen

Marke: Indesit
Kategorie: Waschmaschinen
Modell: IWC 8125 B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Indesit IWC 8125 B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Waschmaschinen Indesit

Indesit

Indesit IWCN 61051X9 EU Bedienungsanleitung

16 Oktober 2024
Indesit

Indesit WIL 133 (UK) (CO) Bedienungsanleitung

14 Oktober 2024
Indesit

Indesit MTWE 61283 WK EE Bedienungsanleitung

13 Oktober 2024
Indesit

Indesit WISL 105 (PL).1 Bedienungsanleitung

12 Oktober 2024
Indesit

Indesit W 104 Bedienungsanleitung

12 Oktober 2024
Indesit

Indesit BTW E71253P (EU) Bedienungsanleitung

11 Oktober 2024
Indesit

Indesit IWC 61281 ECO DE Bedienungsanleitung

14 Juli 2024
Indesit

Indesit WG 1230 Bedienungsanleitung

14 Juli 2024
Indesit

Indesit XWA 91082 Bedienungsanleitung

14 Juli 2024
Indesit

Indesit BWE 81683X WSSS NL Bedienungsanleitung

14 Juli 2024

Bedienungsanleitung Waschmaschinen

Neueste Bedienungsanleitung für -Kategorien-

Bosch

Bosch WAXH2M00NL Bedienungsanleitung

16 Oktober 2024
CDA

CDA CI331 Bedienungsanleitung

16 Oktober 2024
Zanussi

Zanussi ZWC 1301 Bedienungsanleitung

16 Oktober 2024
Euromaid

Euromaid HTL65 Bedienungsanleitung

16 Oktober 2024
Whirlpool

Whirlpool FSCR12433 Bedienungsanleitung

16 Oktober 2024
Whirlpool

Whirlpool VAW558P Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WDBIE1485 Bedienungsanleitung

16 Oktober 2024
Freggia

Freggia WIE148 Bedienungsanleitung

16 Oktober 2024
Blomberg

Blomberg WNF 7466 AC20 Bedienungsanleitung

15 Oktober 2024
Whirlpool

Whirlpool AWO/D 41410 Bedienungsanleitung

15 Oktober 2024