Indesit BWC 61452 W EU Bedienungsanleitung

Indesit Waschmaschine BWC 61452 W EU

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Indesit BWC 61452 W EU (4 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
GB
Quick Guide
CONTROL PANEL
1. ON/OFF button
2. START/PAUSE button and indicator light
3. WASH CYCLE PHASE indicator lights
4. DOOR LOCKED indicator light
5. DELAY START button
6. OPTION buttons and indicator lights
7. CHILD LOCK button and indicator light
8. SPIN knob and indicator light
9. TEMPERATURE knob and indicator light
10. WASH CYCLE SELECTOR KNOB
11. PUSH & WASH button
WASH CYCLE TABLE
For all testing institutes:
2) Long cotton cycle: set cycle 6 at a temperature of 40°C.
3) Long synthetics cycle: set cycle 7 at a temperature of 40°C.
* By selecting the cycle and excluding the spin cycle, the washing machine will drain only.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1) Test wash cycle in compliance with regulation 1061/2010:
This cycle is designed for normally soiled cotton loads and is the most ecient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C or
at 40°C. The actual washing temperature may dier from the indicated value.
PRODUCT DESCRIPTION
1.
3.
2.
5.
4.
7.
6.
8.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
DETERGENT DISPENSER DRAWER
Compartment 1:
Do not insert detergent in this compartment.
Compartment 2: Washing detergent (powder or
liquid)
If liquid detergent is used, the removable plastic
partition A (supplied) should be used for proper
dosage.
If powder detergent is used, insert the partition into
slot B.
Compartment 3: Additives (fabric softener, etc.)
The fabric softener must never exceed the “max” level indicated on the
central pin.
! Use powder detergent for white cotton garments, for pre-washing, and for
washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
! To remove the drawer, press lever and pull the drawer outwards.C
C
1
11
3
68 7
245
10 9
THANK YOU FOR BUYING A INDESIT PRODUCT
In order to receive a more complete assistance,
please register your product on
www.indesit.com/register
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bolts are removed.
For more detailed instructions on how to remove them, see the Installation Guide.
Maximum load 6 kg
Power input in o mode 0,5 W / in left-on mode 8 W
Detergents and
Additives
Recommended
detergent
Residual
dampness %
Energy con-
sumption kWh
Total water l
Wash cycle Temperature Maximum
spin
(r.p.m.)
Maximum
load
(kg)
Duration
(minutes)
Wash Fabric
softener Powder Liquid
Default Range 2 3
1 Daily cotton 30°C 1200 3,0 100 – 30°C – –
2 Daily synthetics 30°C – 30°C 1000 3,0 90 – –
3 Coloureds 30°C 30°C 1000 3,0 95 – –
4 Delicates 30°C 30°C 0 0,5 80 – –
5 Rapid 30min 30°C 30°C 800 3,0 30 70 0,16 33
6 Cotton (2) 40°C – 60°C 1400 6,0 230   53 0,97 75
7 Synthetics (3) 40°C – 60°C 1000 3,0 120   46 0,68 55
8 Mixed 40°C – 40°C 1400 6,0 125 – –
9 Eco cotton (1) 60°C 60°C 1400 6,0 195   53 1,01 50
40°C 1400 6,0 230   53 0,97 75
10 White cotton 60°C – 90°C 1400 6,0 170   – –
11 Sport 30°C 30°C 600 2,5 55 – –
12 Duvet 30°C – 30°C 1000 2,0 110 – –
13 Wool 40°C 40°C 800 1,0 70 – –
14 Anti odour 40°C – 40°C 1000 2,5 100 – –
Rinse + Spin 1400 6,0 50 – –
Spin + Drain * 1400 6,0 10 – –
Required dosage Optional dosage
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Daily cotton
A 30°C cycle for cotton garments. It allows for reducing electricity
consumption for heating the water while guaranteeing good washing
performance. Suitable for lightly soiled garments.
Daily synthetics
A 30°C cycle for synthetic garments. It allows for reducing electricity
consumption for heating the water while guaranteeing good washing
results. Suitable for lightly soiled garments.
Coloureds
A 30°C cycle that helps to preserve colours, suitable for cotton or
synthetic coloured garments. It allows for reducing electricity
consumption for heating the water while guaranteeing good washing
results. Suitable for lightly soiled garments.
Delicates
Suitable for washing very delicate garments. It is advisable to turn the
garments inside out before washing them. For best results, use liquid
detergent on delicate garments. For washing silk items and curtains,
select cycle 4 and activate the option; the machine will end the
cycle with the laundry soaked and the indicator light will ash. To drain
the water so that the laundry can be removed, press the START/PAUSE
button or the button.
Rapid 30min
For washing lightly soiled garments in a short time. Not suitable for wool,
silk and garments to be washed by hand.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Synthetics
Suitable for washing moderately soiled garments made of synthetic bres
(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.
Mixed
A 40°C cycle for washing cotton and synthetic garments together.
Suitable for lightly soiled underwear.
Eco cotton
Suitable for washing moderately soiled cotton garments. At 40°C and
60°C it is the standard cycle for washing cotton garments, and is the most
ecient in terms of combined water and electricity consumption.
White cotton
For heavily soiled whites and resistant colours.
Sport
A cycle designed for washing lightly soiled sports clothing (tracksuits,
shorts, etc.); for best results, we recommend not exceeding the maximum
load indicated in the “Wash Cycle Table”. We recommend using liquid
detergent and adding the amount suitable for a half-load.
Duvet
For washing clothing padded with goose down, such single duvets
(weighing under 2 kg), cushions or down jackets. Duvets should be
loaded into the drum with their edges folded inwards and no more than
¾ of the total drum volume should be used up. For best results, it is
advisable to use liquid detergent to be poured into the detergent drawer.
Wool - Woolmark Apparel Care - Blue:
The “Wool” wash cycle is approved by the Woolmark Company
for washing wool garments classied ashand-washable,
provided that the wash complies with the instructions
appearing on the garments label and with those provided by
the manufacturer of this washing machine (M1126).
Anti odour
Use this cycle (for synthetic fabrics) to wash garments with bad odours
(e.g. smoke, sweat, fried food). The cycle is designed to remove bad
odours while preserving the fabric bres.
Rinse + Spin
Designed for rinsing and spinning.
Spin + Drain
Designed to spin and drain the water.
WASH CYCLE PHASE INDICATOR LIGHTS
The indicator lights provide important information.
This is what they can tell you:
Delayed start
If the DELAY TIMER function has been activated, after the wash cycle has
been started the indicator light corresponding to the selected delay
period will begin to ash:
As time passes, the remaining delay will be displayed and the
corresponding indicator light will ash:
The set programme will start once the selected time delay has expired.
Wash cycle phase indicator lights
Once the desired wash cycle has been selected and has begun, the
indicator lights switch on one by one to indicate which phase of the cycle
is currently in progress.
Wash
Rinse
Spin
Drain
End of Wash Cycle
DOOR LOCKED INDICATOR
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns o before opening the door (wait
approximately 3 minutes).
To open the door while a cycle is in progress, press the START/PAUSE
button; if the indicator light is o, the door can be opened.
FIRSTTIME USE
Once the appliance has been installed, and before it is used for the rst
time, run a wash cycle with detergent and no laundry, by setting the
Auto-Clean” cycle.
DAILY USE
Prepare the laundry by following the suggestions appearing under the
TIPS AND SUGGESTIONS” section.
Rapid programming
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments as described in “DETERGENT DISPENSER DRAWER
section”.
- Close the door.
- Press the PUSH & WASH button to start the wash cycle.
Traditional programming
- Turn the washing machine on by pressing the ON/OFF button. All the
indicator lights will light up for a few seconds, then only the lights
corresponding to the settings for the selected wash cycle will remain lit;
the START/PAUSE indicator light will also ash.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the Wash Cycle Table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments as described in “DETERGENT DISPENSER
DRAWER section.
- Close the door.
- Set the WASH CYCLE knob to the desired cycle.
- Modify the temperature and/or spin: turning the TEMPERATURE and/or
SPIN SPEED knob.
- Select the desired options.
- Press the START/PAUSE button to start the wash cycle; the relative indicator
light will light up steady green and the door will lock ( indicator light on).
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash amber. If the indicator light is not lit, the door
may be opened (wait approximately 3 minutes). To start the wash cycle
from the point at which it was interrupted, press the START/PAUSE
button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the indicator light turns on to signal that the door
cannot be opened. While a wash cycle is running, the door remains
locked. To open the door while a cycle is under way, for example, to add
or remove garments, press the START/PAUSE button to pause the
cycle; the indicator light will ash amber. If the indicator light is not lit,
the door may be opened (wait approximately 3 minutes). Press the START/
PAUSE button again to continue the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button (the relative indicator light will ash
amber), then select the desired cycle and press the START/PAUSE
button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button.
The cycle will be stopped and the machine will switch o.
END OF THE CYCLE
Once the cycle terminates the indicator light will light up; when the
indicator light switches o, the door may be opened (wait approximately
3 minutes). Open the door, unload the laundry and switch o the
machine. If you do not press ON/OFF button, the washing machine will
switch o automatically after about a half of an hour.
OPTIONS
- If the selected function is not compatible with the programmed wash
cycle, the corresponding indicator light will ash and the function will
not be activated.
- If the selected option is not compatible with another previously
selected option, the indicator light will ash and only the latter option
will be activated; the indicator light corresponding to the activated
option will turn on.
Extra rinse
By selecting this option, the eciency of the rinse is increased and
optimal detergent removal is guaranteed. It is particularly useful for
sensitive skin.
Easy iron
By selecting this function, the wash and spin cycles will be modied in
order to reduce the formation of creases. At the end of the cycle the
washing machine will perform slow rotations of the drum, while the EASY
IRON and START/PAUSE indicator lights will ash and the led will
remain lit in a xed manner. To end the cycle, press the START/PAUSE
button or the EASY IRON button.
Delay start
To set a delayed start for the selected cycle, press the corresponding button
repeatedly until the desired delay period has been reached (3h-6h-9h).
When the button is pressed for the fourth time, the option will deactivate.
Once the START/PAUSE button has been pressed, the delay time can
only be modied by decreasing it until the set cycle is launched.
Temperature
Turning the TEMPERATURE knob to set the wash temperature.
The temperature may be lowered, or even set to a cold wash .
N.B.: If the set value is compatible with the selected cycle, the knob indicator
will be lit (xed light). If it isn’t, it willash and 3 beeps will be heard.
The washing machine will automatically prevent you from selecting a
temperature which is higher than the maximum value set for each wash cycle.
Spin
Turning the SPIN SPEED knobn to set the spin speed for the selected wash
cycle.
The spin speed may be lowered, or the spin cycle can be excluded
altogether by selecting the symbol .
The washing machine will automatically prevent you from selecting a
spin speed which is higher than the maximum speed set for each wash
cycle.
N.B.: If the set value is compatible with the selected cycle, the knob
indicator will be lit (xed light). If it isn’t, it will ash and 3 beeps will be
heard.
Push & Wash
This function allows for starting a wash cycle even when the machine is
switched o without having to press the ON/OFF button in advance
or, after switching the machine on, without having activated any other
button and/or selector knob (otherwise the Push & Wash cycle will be
deactivated). To start the Push & Wash cycle press and hold the relative
button for 2 seconds. The lit indicator light indicates that the cycle has
started. This wash cycle is ideal for cotton or synthetic fabrics, as it washes
at a temperature of 30°C and a maximum spin speed of 1.000 rpm. Max
load 3,5 kg (cycle duration 45’).
How does it work?
1. Load the laundry (cotton and/or synthetic garments) and close the
door.
2. Pour the detergent and additives.
3. Start the cycle by pressing and holding the Push & Wash button for 2
seconds. The relevant indicator light will turn green and the door will lock
(the symbol lights up).
N.B.: starting the wash cycle through the Push & Wash button activates an
automatic non-customisable cycle recommended for cotton and synthetic
fabrics. This cycle does not allow for setting any additional options.
To open the door while an automatic cycle is under way, press the START/
PAUSE button; if the locked door symbol is o, the door may be
opened. Press the START/PAUSE button again to restart the cycle from
the point at which it was interrupted.
4. Once the programme is nished, the indicator light turns on.
CHILD LOCK
to activate the control panel lock, press and hold the button for
approximately 2 seconds. The lit symbol signals that the control
panel is locked. This prevents wash cycles from being modied
accidentally (except for the ON/OFF button), especially if there are
children in the home. To deactivate the control panel lock, press and hold
the button for approximately 2 seconds.
TIPS AND SUGGESTIONS
Divide the laundry according to:
Type of fabric (cotton, mixedbres, synthetics, wool, garments to be
hand-washed). Colour (separate coloured garments from whites, wash new
coloured garments separately). Delicates (small garmentssuch as nylon
stockings and items with hooks such as bras: insert them in a fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washing machine and
the drum. Check all buttons.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washing machine
o and disconnect it from the mains power. Do not use ammable liquids to
clean the washing machine.
Disconnect the water and power supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washing machine and help to prevent leaks.
Unplug the washing machine when cleaning it and during all
maintenance work.
Clean the washing machine
The outer parts and rubber components of the appliance can be cleaned using
a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
The washing machine has a Auto-clean” cycle for its internal parts; it must
be run without any load in the drum.
To optimise this cycle, it is possible to use either detergent (10% of the
quantity specied for lightly soiled garments) or special additives to clean
the washing machine. We recommend running a cleaning cycle every 40
wash cycles.
To start the cycle press buttons and simultaneously for 5 seconds.
The cycle will start automatically and will run for about 70 minutes. To
stop the cycle, press the START/PAUSE button.
Clean the detergent dispenser drawer
Wash it under running water; this operation should be repeated frequently.
Care for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant odours
from forming.
Clean the pump
The washing machine is tted with a auto-cleaning pump that does not require
any maintenance. Small items (such as coins or buttons) may sometimes fall into
the protective pre-chamber situated at the base of the pump.
! Make sure the wash cycle has ended and unplug the appliance.
To access the pre-chamber:
1. remove the cover panel on the front of the machine by rst pressing it
in the centre then pushing downwards on both sides to extract it;
2. loosen the drainage pump cover by turning it anti-clockwise: it is
normal for some water to leak out;
3. clean the inside thoroughly;
4. screw the cover back on;
5. put the panel back in place, making sure the hooks slot in place before
pushing the panel onto the appliance.
Check the water inlet hose
Check the water inlet hose at least once a year. If it is cracked or broken, it
must be replaced: during wash cycles, the high pressure of the water
could suddenly split the hose open.
! Never use hoses that have already been used.
LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations before every
spin and to distribute the load in a uniform manner, the drum rotates
continuously at a speed which is slightly greater than the washing
rotation speed. If, after several attempts, the load is not balanced
correctly, the machine spins at a reduced spin speed. If the load is
excessively unbalanced, the washing machine performs the distribution
process instead of spinning. To encourage improved load distribution and
balance, we recommend small and large garments are mixed in the load.
ACCESSORIES
Contact our Technical Assistance Service to check whether the following
accessories are available for this washing machine model.
Stacking kit
With this accessory you can secure the tumble dryer to the upper part of
your washing machine to save space and facilitate loading and unloading
of the tumble dryer.
TRANSPORT AND HANDLING
Do not lift the washing machine by gripping it from the upper section.
Unplug the appliance and close the water tap. Check that the door and
detergent dispenser drawer are tightly closed. Detach the lling hose
from the water tap then detach the drain hose. Empty all the water
remaining in the hoses and secure the latter so that they do not get
damaged during transport. Apply the transport bolts back on. Repeat, in
reverse order, the transport bolt removal procedure described in the
“Health & Safety and Installation Guides”.


Produktspezifikationen

Marke: Indesit
Kategorie: Waschmaschine
Modell: BWC 61452 W EU

Brauchst du Hilfe?

Wenn Sie Hilfe mit Indesit BWC 61452 W EU benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Waschmaschine Indesit

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung für -Kategorien-