ILive ISBW2113B Bedienungsanleitung

ILive Lautsprecher ISBW2113B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr ILive ISBW2113B (2 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂŒr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
ISBW2113B Bluetooth Indoor/Outdoor Speakers
Warning: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
‱ Reorient or relocate the receiving antenna.
‱ Increase the separation between the equipment and receiver.
‱ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
‱ Consult the dealer or an experienced radio/TV technician for help.
‱ The apparatus shall not be exposed to dripping or splashing and that no
objects lled with liquids, such as vases, shall be placed on apparatus.
L’appareil ne doit pas ĂȘtre exposĂ© aux Ă©coulements ou aux Ă©claboussures et aucun
objet ne contenant de liquide, tel qu’un vase, ne doit ĂȘtre placĂ© sur l’objet.
‱ Main plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the
mains plug should be disconnected form the mains socket outlet completely.
La prise du secteur ne doit pas ĂȘtre obstruĂ©e ou doit ĂȘtre facilement
accessible pendant son utilisation. Pour ĂȘtre complĂštement dĂ©connectĂ© de
l’alimentation d’entrĂ©e, la prise doit ĂȘtre dĂ©branchĂ©e du secteur.
‱ Battery shall not be exposed to excessive heat such as sunshine, re or the like.
Les piles ne doivent pas ĂȘtre exposĂ©es Ă  de forte chaleur, tel qu’à la
lumiĂšre du soleil, au feu ou autres choses de semblable.
‱ Caution marking is located at the rear or bottom of the apparatus.
Attention marquage est situĂ© sur le paneau arriĂšre ou infĂ©rieur de l’unitĂ©.
‱ The marking information is located at the rear or bottom of apparatus.
Le marquage est situĂ© sur le paneau arriĂšre ou infĂ©rieur de l’unitĂ©.
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. When the provided plug
does not t into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories
specied by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over. Unplug this apparatus during lightning
storms or when unused for long periods of time.
13. Refer all servicing to qualied
service personnel. Servicing
is required when the apparatus
has been damaged in any way,
such as power-supply cord or
plug is damaged, liquid has been
spilled or objects have fallen
into the apparatus, the apparatus
has been exposed to rain or
moisture, does not operate
normally, or has been dropped.
‱ CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
‱ WARNING:To reduce the risk of re or electric shock, do
not expose this apparatus to rain or moisture.
‱ AVERTISSEMENT: Pour rĂ©duire le risque d’incendie ou de choc
Ă©lectrique, ne pas exposer cet appareil sous la pluie et l’humiditĂ©.
‱ CAUTION: Use of controls or adjustments or performance of procedures
other than those specied may result in hazardous radiation exposure.
‱ WARNING: Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
‱ WARNING:Do not place this unit directly onto furniture surfaces with any type of soft, porous,
or sensitive nish. As with any rubber compound made with oils, the feet could cause marks
or staining where the feet reside. We recommend using a protective barrier such as a cloth or a
piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
‱ WARNING: Use of this unit near uorescent lighting may cause interference
regarding use of the remote. If the unit is displaying erratic behavior move
away from any uorescent lighting, as it may be the cause.
‱ CAUTION:Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
‱ PRÉCAUTION: Danger d’explosion si les piles sont remplacĂ©es de façon incorrect.
Remplacer les piles seulement par le mĂȘme type de pile ou l’équivalent.
‱ WARNING: There is a danger of explosion if you attempt to charge standard
Alkaline batteries in the unit. Only use rechargeable NiMH batteries.
‱ WARNING: The remote control’s button cell battery contains mercury. Do
not put in the trash, instead recycle or dispose of as hazardous waste
‱ WARNING:Lithium batteries, like all rechargeable batteries are recyclable and should be
recycled or disposed of in normal household waste. Contact your local government for disposal
or recycling practices in your area. They should never be incinerated since they might explode.
‱ WARNING: Shock hazard - Do Not Open.
‱ AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
Mains plug is used as disconnect device and it should remain readily operable during
intended use. In order to disconnect the apparatus from the mains completely, the
mains plug should be disconnected form the mains socket outlet completely.
La prise du secteur est utilisé pour déconnecter le systÚme.
La prise du secteur ne doit pas ĂȘtre obstruĂ©e ou doit ĂȘtre facilement
accessible pendant son utilisation. Pour ĂȘtre complĂštement dĂ©connectĂ© de
l’alimentation d’entrĂ©e, la prise doit ĂȘtre dĂ©branchĂ©e du secteur.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
No mezcle baterĂ­as viejas y nuevas.
No mezcle baterĂ­as alcalinas, estĂĄndar (carbono-zinc) o recargables (ni-cad, ni-mh, etc.).
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
ATTENTION
RISQUE D' ÉLECTROCUTION
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
This symbol indicates that this product
incorporates double insulation between hazardous
mains voltage and user accessible parts.
The lightning ash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of
electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS
Introduction
FCC Warnings
Additional Warnings
WARNINGS AND PRECAUTIONS
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com 1-888-999-4215Customer Service:
Email Support: Email Parts: prodinfo@dpiinc.com, partsinfo@dpiinc.com
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
USER’S GUIDE
V:804-01
Volume
Press to adjust the
volume.
Battery Indicator
Speaker Connection
Indicator
Bluetooth Pairing
Indicator
DC Power Input Pair
Press to begin pairing
the speakers.
Connect Speakers
Press to connect the
speakers.
Power
Slide the power
switch to turn the unit
on or off.
DC IN 9V
ON/OFF
PAIRVOLUME CONNECT
SPEAKERS
To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la
secciĂłn de apoyo en www.iLiveElectronics.
com
Pour tĂ©lĂ©charger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posĂ©es, consultez la rubrique d’assistance
sur www.iLiveElectronics.com
International Support
For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com 1-888-999-4215Customer Service:
Email Support: Email Parts: prodinfo@dpiinc.com, partsinfo@dpiinc.com
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specications are subject to change without notice.
Speaker Connection & Bluetooth SetupSetup
Pairing the Speakers
Pairing a Bluetooth Device
1. Power on the speakers by sliding the
power switch to the ON position on both
units (rst make sure both speakers are
fully charged).
The Bluetooth Indicator and Speaker
Connection Indicator will ash slowly
in unison. If the Speaker Connection
Indicator is not ashing, but is solid white
both speakers your speakers are already
paired. You can skip to the Pairing a
Bluetooth Device section.
2. Press the Connect Speakers button on
both speakers simultaneously.
The Speaker Connection Indicators will
ash quickly.
3. Wait until both Speaker Connection
Indicators are solid white, this means the
speakers have been successfully paired.
Please note that this process can take
up to 1 minute.
Note : For all future uses please turn
on both speakers and wait for them to
connect (it may take up to 1 minute for
them to pair automatically even after initial
use). There should be no need to press
Connect Speaker button again.
If any pairing issues should occur, please
follow the above steps again.
1. Make sure you have rst followed the
instructions for Pairing the Speakers.
When pairing, the device should remain
within 3 feet of the speakers.
2. Press the Pair button on ONLY one of the
speakers. The pair indicator will begin
ash quickly.
Using the native controls on your
Bluetooth device, select the “ISBW2113”
in your Bluetooth settings to pair.
If your device requests a password, enter
the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specic
device for instructions on pairing and
connecting Bluetooth devices.
3. When successfully paired, the pairing
indicator will stop ashing and will remain
solid.
After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
If your device should become unpaired,
follow the above steps again.
If any pairing issues should occur, un-pair
the unit on your Bluetooth device and
follow the above steps again.
Note : If two speakers with the ISBW2113
name appear on the pairing list of your
device, please erase one of ISBW2113
listed in your Bluetooth device and repeat
the above steps again.
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the native controls on the
connected Bluetooth Device to select a
track.
3. To play, pause or skip the selected track,
use the native controls on the connected
Bluetooth Device.
4. Any audio played through the connected
Bluetooth device will now be heard
through the speakers.
Playing Audio Wirelessly
(This process should be done FIRST before
pairing a Bluetooth device. This should only
need to be done upon rst use.)
DC power input: requires an AC/DC power
adapter (included)
1. Connect one end of the included AC/DC
power adaptor to the unit and one end
to an AC power outlet to recharge the
battery.
Note: Each speaker must be charged
independently.
Note: Battery life when not in use is roughly
6 months. The battery must then be fully
recharged.
(Please charge each speaker for at least 2.5
hours before using).
DC IN 9V
ON/OFF
Charging the Internal Batteries
Battery Indicator
Status Indicator
Power O No light
Charging Red light
Fully Charged No light
Low battery Flashing red light


Produktspezifikationen

Marke: ILive
Kategorie: Lautsprecher
Modell: ISBW2113B

Brauchst du Hilfe?

Wenn Sie Hilfe mit ILive ISBW2113B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher ILive

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂŒr -Kategorien-