Iiyama ProLite T1532MSC-B5X Bedienungsanleitung

Iiyama Monitor ProLite T1532MSC-B5X

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Iiyama ProLite T1532MSC-B5X (31 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/31
ENGLISH
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes
to read this comprehensive manual carefully
before installing and switching on the monitor.
Please keep this manual in a safe place for
your future reference.
USER MANUAL
ENGLISH
We reserve the right to change speci cations without notice.
All trademarks used in this user manual are the property of their respective owners.
We recommend recycling of used product. Please contact your dealer or iiyama
service center. Recycle information is obtained via the Internet, using the address:
http://www.iiyama.com
You can access the Web page of di erent countries from there.
CE MARKING DECLARATION OF CONFORMITY
This LCD monitor complies with the requirements of the EC/EU Directive 2014/30/EU EMC
Directive”, 2014/35/EU “Low Voltage Directive” and 2011/65/EU “RoHS Directive”.
Warning
This is a class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands
Model No. : PLT1532M / PLT1732M / PLT1932M
ENGLISH
TABLE OF CONTENTS
FOR YOUR SAFETY ............................................................................1
SAFETY PRECAUTIONS................................................................1
SPECIAL NOTES ON LCD MONITORS .........................................3
CUSTOMER SERVICE ...................................................................3
CLEANING ......................................................................................3
BEFORE YOU OPERATE THE MONITOR ..........................................4
FEATURES......................................................................................4
CHECKING THE CONTENTS OF THE PACKAGE ........................5
SPECIAL NOTES ON TOUCH PANEL............................................5
WALL MOUNTING ..........................................................................5
BUILT-IN EQUIPMENT ....................................................................5
CONTROLS AND CONNECTORS..................................................6
CONNECTING YOUR MONITOR ...................................................7
COMPUTER SETTING ...................................................................8
ADJUSTING THE VIEWING ANGLE ...........................................10
OPERATING THE MONITOR ............................................................. 11
ADJUSTMENT MENU CONTENTS ..............................................12
SCREEN ADJUSTMENTS ............................................................17
POWER MANAGEMENT FEATURE .............................................20
TROUBLE SHOOTING ......................................................................21
RECYCLING INFORMATION .............................................................22
APPENDIX ........................................................................................23
SPECIFICATIONS : ProLite T1532MSC .......................................23
SPECIFICATIONS : ProLite T1732MSC .......................................24
SPECIFICATIONS : ProLite T1932MSC .......................................25
DIMENSIONS : ProLite T1532MSC ..............................................26
DIMENSIONS : ProLite T1732MSC ..............................................26
DIMENSIONS : ProLite T1932MSC ..............................................26
COMPLIANT TIMING ....................................................................27
ENGLISH
FOR YOUR SAFETY 1
FOR YOUR SAFETY
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the
monitor and contact your dealer or iiyama service center immediately. Further use may be
dangerous and can cause re or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of
re or electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with
any object inside may cause re, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause re or electric
shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the speci ed power supply. Use of an incorrect voltage will
cause malfunction and may cause re or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy
objects on the cables. If damaged, the cables may cause re or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it
may cause electric shock.
SAFETY PRECAUTIONS
ENGLISH
2 FOR YOUR SAFETY
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or
smoky areas as it may cause re, electric shock or damage. You should also avoid areas where the
sun shines directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not
place any heavy objects on the monitor, and that all cables are routed such that children may not
pull the cables and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause
re. To allow adequate air circulation, place the monitor at least 10cm (or 4 inches) from any walls.
When removing the tilt stand, the ventilation slots on the back side of the monitor can be blocked.
This may overheat the monitor and may cause fire or damage. Make sure to allow enough
ventilation when removing the tilt stand. Operating the monitor on its back, side, upside down or on
a carpet or any other soft material may also cause damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn o the power switch, unplug the monitor and be sure the signal
cable is disconnected. If you do not disconnect them, it may cause re or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to
avoid accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable
itself as this may cause re or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may
damage your computer.
REMARK FOR 24/7 USAGE
This product is not speci cally designed for 24/7 usage in all environments.
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour
is recommended as looking at the screen continuously can cause eye strain.
OTHERS
ENGLISH
FOR YOUR SAFETY 3
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE 
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
the correct position.

You may find slightly uneven brightness on the screen depending on the desktop
pattern you use.

Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen is recovered slowly by changing the image or turning o the Power Switch for
hours.

Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, ickering or not lighting up. Never attempt to replace it by yourself.
SPECIAL NOTES ON LCD MONITORS
WARNING
NOTE
CLEANING

If you drop any materials or liquids such as water into the monitor when cleaning,
unplug the power cable immediately and contact your dealer or iiyama service center.

To protect the Touch screen surface, do not scratch or rub the screen with a hard
object.

Never use any of the following strong solvents. These will damage the cabinet and
the Touch screen surface.
Abrasive cleaner Wax Solvent

Touching the cabinet with any product made from rubber or plastic for a long time
may cause degeneration or loss of paint on the cabinet.
CABINET Stains can be removed with a cloth lightly moistened with a mild detergent solvent.
Then wipe the cabinet with a soft dry cloth.
TOUCH
SCREEN
Touch screen surface may be cleaned using a soft clean cloth moistened with mild
window glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
NOTE 
The uorescent light used in the LCD monitor may have to be periodically replaced. For
the warranty coverage on this component, please check with local iiyama service center.

If you have to return your unit for service and the original packaging has been
discarded, please contact your dealer or iiyama service center for advice or
replacement packaging.
CUSTOMER SERVICE
ENGLISH
4 BEFORE YOU OPERATE THE MONITOR
BEFORE YOU OPERATE THE MONITOR
FEATURES
Supports Resolutions up to 1024 × 768 : ProLite T1532MSC
Supports Resolutions up to 1280 × 1024 : ProLite ProLite T1732MSC /
T1932MSC
High Contrast 700:1 (Typical) / Brightness 330cd/m
2 (Typical: with Touch panel)
: ProLite T1532MSC-B5X
High Contrast 700:1 (Typical) / Brightness 315cd/m
2 (Typical: with Touch panel)
: ProLite T1532MSC-B5AG
High Contrast 1000:1 (Typical) / Brightness 225cd/m
2 (Typical: with Touch
panel) :
ProLite T1732MSC-B5X / ProLite T1732MSC-W5X / ProLite T1932MSC-B5X
High Contrast 1000:1 (Typical) / Brightness 215cd/m
2 (Typical: with Touch panel)
: ProLite MSC-B5AG / ProLite MSC-W5AG / ProLite T1732 T1732 T1932MSC-
B5AG / ProLite T1932MSC-W5AG
Digital Character Smoothing
Automatic Set-up
Stereo Speakers
2 × 1W Stereo Speakers

Plug & Play VESA DDC2B Compliant
Windows® XP/Vista/7/8/8.1/10 Compliant
Power Management (VESA DPMS Compliant)
VESA Mounting Standard (100mm×100mm) Compliant
Keyhole for Security Lock
IP54 Standard Compliant (Only front face)
Glass with AG coating :
ProLite T1532MSC-B5AG / ProLite T1732MSC-B5AG / ProLite T1732MSC-W5AG
/ ProLite T1932MSC-B5AG / ProLite T1932MSC-W5AG
Windows8/8.1/10 touch environment
Basic touch operations can be performed under Windows 8/8.1/10.
However, please be informed that full touch functionality and normal operational performance are
not guaranteed.
ENGLISH
BEFORE YOU OPERATE THE MONITOR 5
The following accessories are included in your package. Check to see if they are enclosed with
the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional
iiyama o ce.
* The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using
a power supply higher than this rating, then a power cable with a rating of 10A/250V
must be used. However, all guarantees and warranties are void for any problems or
damage caused by a power cable not supplied by iiyama.
An approved power cable greater or equal to H05VVF, 3G, 0.75mm
2 must be used.
Power Cable*   HDMI Cable DisplayPort Cable

USB Cable 
Audio Cable 
Screw (M3x6mm)
Safety Guide Quick Start Guide
CHECKING THE CONTENTS OF THE PACKAGE
CAUTION
W h e n y o u us e w i t h th e wa l l mo u n t i n g , in
consideration of thickness of the mounting stage,
tighten the M4 Screws (4pcs) with washer which
L length is 8mm to fasten the monitor. Using
the screw longer than this may cause electric
shock or damage because it may contact with the
electrical parts inside the monitor.
WALL MOUNTING
Screw
Chassis
Mounting Stage
L
WARNING
Permanent damage can occur if Sharp Edged, Pointed or Metal items are used to activate Touch.
This could invalidate any remaining warranty.
We recommend to use a plastic stylus (tip R0.8 or over) or nger.
SPECIAL NOTES ON TOUCH PANEL
This product is not designed for the purpose of being used in high temperature
environment.
If the product is placed in an external cabinet, you need to design cooling fans
and vents to keep the temperature low enough to fit in the product temperature
speci cation.
BUILT-IN EQUIPMENT
WARNING
ENGLISH
6 BEFORE YOU OPERATE THE MONITOR
CONTROLS AND CONNECTORS
Menu Button ( )
Scroll Up / Brightness Button ( )
Scroll Down / Mute Button ( )
Select Button ( )
Power Switch ( )
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed
without your permission.
Speakers
USB Connector (USB)
Audio Connector (AUDIO)
VGA Connector(VGA)
HDMI Connector (HDMI)
DisplayPort Connector (DP)
AC Connector( : Alternating current) (AC IN)
NOTE
<Front> <Back>
[Fitting and Removal of Cable Cover]
Removal
Press and hold on the Cable Cover and
remove the Cable Cover.
Fitting
Place the Cable Cover.
Fix the Monitor with the Cable Cover by the
screw rmly.
Cable Cover
Screw (accessory)
ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
Signal Timing
Change to the desired signal timing listed on page 27: COMPLIANT TIMING.
Windows XP/Vista/7/8/8.1/10 Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs
on Windows XP/Vista/7/8/8.1/10 by connecting the monitor to DDC2B compliant computer with
the Signal Cable supplied.
For installation on Windows XP: The monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
http://www.iiyama.com

For additional information on how to download the driver for your touch screen monitor,
please access the internet site noted above.

Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.
For further information, please contact your computer dealer rst for advice.
COMPUTER SETTING
NOTE
Procedure for turning ON the Power Switch
Turn ON the monitor rst, and then the computer.

Touch screen driver software
Touch screen driver software and system may not start when you start your computer while
touching he screen.
Touch screen driver software may not run due to the power saving function depending on the
BIOS of your computer. In this case, set the power saving function to o .

TOUCH support operation system
Microsoft Windows XP (64 bit and 32 bit) Microsoft Windows Vista (64 bit and 32 bit)
Microsoft Windows 7 (64 bit and 32 bit) Microsoft Windows 8 / 8.1 / 10 (64 bit and 32 bit)
Microsoft Windows CE 2.13 / 3.0, net 6.0 Mac OS X V10.4/10.5/10.6 & above
Linux (Kernel2.4, 2.6x) & above Not support earlier versions.
Windows8/8.1/10 Windows7*5Windows7*4Vista XP
Default mouse*1
Touch digitizer*2
Windows7 gestures*3
2K Windows CE XP Embedded Mac OS X Linux
Default mouse*1
Touch digitizer*2
Windows7 gestures*3
*1 Default mouse (click, drag, double-click and right-click)
*2 Touch digitizer (click, drag /selection, double-click, right-click, ick and visual feedback)
*3 Digitizer with Windows7 touch gestures
*4 Windows 7 - Starter and Home Basic version
*5 Windows 7 - Home Premium, Professional, Enterprise and Ultimate versions
ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
NOTE
Touch Input Settings in Dual Screen Mode
Connect the primary monitor to the computer rst.
Set Control Panel > Hardware and Sound > Tablet PC Settings > Display > Setup.
After setting , connect a second monitor and perform the setup as in .
The monitors are recognized as dual-display, and touch operation cannot be performed on
two monitors at the same time.
You can perform touch operation on only one of the monitors.
The following message will appear on the screen. Please follow the instructions.
ENGLISH
OPERATING THE MONITOR 11
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 27. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 17 for SCREEN ADJUSTMENTS.
Press the Button to start the On Screen Display feature. There are additional Menu items
which can be switched by using the / Buttons.
Select the Menu item which contains the adjustment icon relating to the adjustment you
want to make. Use the Buttons to highlight the desired adjustment icon.
Use the / Buttons to make the appropriate adjustment or setting.
Press the Button to leave the menu, and the settings you just made would be
automatically saved.

When button operations are aborted during adjustment, On-Screen Display disappears when the
time set for the OSD TIMEOUT has passed.
button can be used to return previous menu item.

Any changes are automatically saved in the memory when the On Screen Display
disappears.
Turning o the power should be avoided while using the Menu.

Adjustments for H/V-POSITION, H-SIZE and FINE are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of . Then, select V-POSITION
by using the Buttons.
Use the / Buttons to change the vertical position settings. The vertical position of the overall
display should be changing accordingly while you are doing this.
Press the Button lastly, it ends, any changes are saved in the memory.
C O N T R A S T
B R I GH T NE S S
12 8 0x 1 0 2 4
F H : 6 3 K H z F V: 5 9 . 9 H z
AUT O A D J U S T
H - P O S I T I O N
V- P O S I T I O N
H - S I Z E
F I N E
100
ENGLISH
OPERATING THE MONITOR 13
Adjustment Item Problem / Option Button to Press
FINE *2
H-SIZE *2
Too left
Too right
Too low
Too high
H-POSITION
V-POSITION
Too narrow
Too wide
To correct ickering text or lines
AUT O A D J U S T
H - P O S I T I O N
V- P O S I T I O N
H - S I Z E
F I N E
AUTO ADJUST *1Adjust H/V-POSITION, H-SIZE and FINE automatically.
*1 For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 17 for
SCREEN ADJUSTMENTS.
*2 See page 17 for SCREEN ADJUSTMENTS.
Only Analog Input
ENGLISH
14 OPERATING THE MONITOR
O S D H - P O S I T I O N
O S D V- P O S I T I O N
O S D T I M E O U T
R E S E T
I N P U T S E LE C T
OSD TIMEOUT
OSD H-POSITION OSD is too left
OSD is too right
OSD is too low
OSD is too high
You can set the OSD display duration time
between 5 and 60 seconds.
Adjustment Item Problem / Option Button to Press
OSD V-POSITION
RESET Factory-preset data is restored.
INPUT SELECT
However it will automatically be selected when just one source is using.
In Power Management Mode input switching is disabled.
Input source is xed, not selected automatically when VGA, HDMI and DisplayPort which
are selected.
Select the analog input.
Select the digital(HDMI) input.
VGA
HDMI
NOTE
Search for an available input source and select
automatically.
AUTO
Di rect
You can skip the Menu items and display an adjustment scale directly by using the following button
operations.

INPUT SELECT: Pressing and holding of the Button for about 5 seconds when the Menu
is not displayed. When both VGA, HDMI and DisplayPort signal inputs are
connected to a signal source, you can switch between them by successively
pressing the Button.
Direct
Select the digital(DisplayPort) input. DisplayPort
ENGLISH
OPERATING THE MONITOR 15
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
Adjustment Item Problem / Option Button to Press
OSD LANGUAGE
ENGLISH
DEUTSCH
English
German
FRANÇAIS French Japanese
ITALIANO Italian Simpli ed Chinese
ESPAÑOL Spanish
Traditional Chinese
9300
6500
5500
7500
USER
RED
GREEN
BLUE
94
90
100
Adjustment Item Problem / Option Button to Press
Greenish white
Yellowish white
GREEN
RED Too weak
Too strong
USER
Reddish white
Bluish white9300
COLOR TEMP.
5500
6500
7500
BLUE
ENGLISH
18 OPERATING THE MONITOR
1) Adjust the H-POSITION so that the left side of the picture frame will move to the left
edge of the display area.
When the left side of the picture frame moves apart from the left edge of the display
area during the H-SIZE adjustment, adjust steps 1) and 2).
Another way to make the H-SIZE adjustment is to correct the vertical wavy lines in
the zebra pattern.
The picture may icker during the H-SIZE, H/V-POSITION adjustment.
In case the picture frame is bigger or smaller than the data display area after the
H-SIZE adjustment, repeat steps from .
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the H-SIZE.
Press the Button. (AUTO ADJUST)
Adjust the image manually by following procedure below when the screen has a icker or
blur, or the picture does not t in the display area after performing the Auto Adjust.
Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the
display area.
NOTE


Produktspezifikationen

Marke: Iiyama
Kategorie: Monitor
Modell: ProLite T1532MSC-B5X

Brauchst du Hilfe?

Wenn Sie Hilfe mit Iiyama ProLite T1532MSC-B5X benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Monitor Iiyama

Bedienungsanleitung Monitor

Neueste Bedienungsanleitung für -Kategorien-