Icom IC-R1500 Bedienungsanleitung

Icom Empfänger IC-R1500

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Icom IC-R1500 (56 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/56
INSTRUCTION MANUAL
iR1500
COMMUNICATIONS RECEIVER
i
FOREWORD
Thank you for purchasing this Icom receiver. The IC-R1500
COMMUNICATIONS RECEIVER
is designed and built with Icom’s
state of the art technology and craftsmanship. With proper
care, this receiver should provide you with years of trouble-
free operation.
We want to take a couple of moments of your time to thank
you for making the IC-R1500 your radio of choice, and hope
you agree with Icom’s philosophy of “technology first.” Many
hours of research and development went into the design of
your IC-R1500.
D
D
D
D
D
FEATURES
Wide frequency coverage with all-mode re-
ceive
Both Remote controller operation and PC
control application are available
ANF and NR functions are available (Only
when the optional DSP unit is installed.)
IF shift function
IMPORTANT
READ ALL INSTRUCTIONS carefully and completely
before using the receiver.
SAVE THIS INSTRUCTION MANUAL This in-
struction manual contains important operating instructions for
the IC-R1500.
EXPLICIT DEFINITIONS
WORD DEFINITION
RWARNING!
CAUTION
NOTE
Personal injury, fire hazard or electric shock
may occur.
Equipment damage may occur.
Recommended for optimum use. No risk of
personal injury, fire or electric shock.
Icom, Icom Inc. and the logo are registered trademarks of Icom Incor-
porated (Japan) in the United States, the United Kingdom, Germany, France,
Spain, Russia and/or other countries.
ii
RWARNING! NEVER connect the receiver via the
OPC-254L to an AC outlet. This may pose a fire hazard or re-
sult in an electric shock.
RWARNING! NEVER operate the receiver while dri-
ving a vehicle. Safe driving requires your full attention— any-
thing less may result in an accident.
NEVER connect the receiver to a power source of more
than 14 V DC. This will damage the receiver.
NEVER connect the receiver to a power source using re-
verse polarity. This will damage the receiver.
NEVER cut the DC power cable between the DC plug and
fuse holder. If an incorrect connection is made after cutting,
the receiver may be damaged.
DO NOT leave the main unit powered ON and connected
to a vehicle’s electrical system. The main unit draws approx.
550 mA. This will eventually drain the vehicle’s battery.
NEVER expose the receiver to rain, snow or any liquids.
The receiver may be damaged.
NEVER operate or touch the receiver with wet hands. This
may result in an electric shock or damage the receiver.
NEVER place the receiver where normal operation of the
vehicle may be hindered or where it could cause bodily injury.
NEVER let objects impede the operation of the cooling fan
on the rear panel.
AVOID using or placing the receiver in direct sunlight or in
areas with temperatures below 10°C (+14°F) or above
+60°C (+140°F).
BE CAREFUL! The receiver will become hot when op-
erating it continuously for long periods.
AVOID setting the receiver in a place without adequate
ventilation. Heat dissipation may be affected, and the receiver
may be damaged.
AVOID the use of chemical agents such as benzine or al-
cohol when cleaning, as they can damage the receiver’s sur-
faces.
For U.S.A. only
CAUTION: Changes or modifications to this device, not ex-
pressly approved by Icom Inc., could void your authority to
operate this device under FCC regulations.
PRECAUTIONS


Produktspezifikationen

Marke: Icom
Kategorie: Empfänger
Modell: IC-R1500

Brauchst du Hilfe?

Wenn Sie Hilfe mit Icom IC-R1500 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Empfänger Icom

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-