Icom IC-746 Bedienungsanleitung

Icom Empfänger IC-746

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Icom IC-746 (90 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 82 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/90
INSTRUCTION MANUAL
VHF/HF ALL MODE TRANSCEIVER
i746
This device complies with Part 15 of the FCC rules. Operation is sub-
ject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The IC-746’s which display the “CE” symbol, comply
with the essential requirements of the 89/336/EEC di-
rective for Electromagnetic Compatibility. This compli-
ance is based on conformity with the ETSI specification
prETS300 684 (EMC product standard for Commer-
cially Available Amateur Radio Equipment).
ii
IMPORTANT
WORD DEFINITION
RWARNING Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
READ THIS INSTRUCTION MANUAL CAREFULLY
before attempting to operate the transceiver.
SAVE THIS INSTRUCTION MANUAL—This manual
contains important safety and operating instructions for
the IC-746.
PRECAUTIONS
RWARNING! HIGH VOLTAGE! NEVER attach an
antenna or internal antenna connector during trans-
mission. This may result in an electric shock or burn.
RNEVER apply AC to the [DC13.8V] socket on the
transceiver rear panel. This could cause a fire or ruin
the transceiver.
RNEVER apply more than 16 V DC, such as a 24 V
battery, to the [DC13.8V] socket on the transceiver rear
panel. This could cause a fire or ruin the transceiver.
RNEVER let metal, wire or other objects touch any in-
ternal part or connectors on the rear panel of the trans-
ceiver. This may result in an electric shock.
NEVER allow children to play with equipment contain-
ing a radio transmitter.
NEVER expose the transceiver to rain, snow or any liq-
uids.
AVOID using or placing the transceiver in areas with
temperatures below –10°C (+14°F) or above +60°C
(+140°F). Be aware that temperatures on a vehicle’s
dashboard can exceed 80°C (+176°F), resulting in per-
manent damage to the transceiver if left there for ex-
tended periods.
AVOID placing the transceiver in excessively dusty en-
vironments or in direct sunlight.
AVOID placing the transceiver against walls or putting
anything on top of the transceiver. This will obstruct
heat dissipation.
During mobile operation, DO NOT operate the trans-
ceiver without running the vehicle’s engine. When
transceiver power is ON and your vehicle’s engine is
OFF, the vehicle’s battery will soon become exhausted.
Make sure the transceiver power is OFF before start-
ing the vehicle. This will avoid possible damage to the
transceiver by ignition voltage spikes.
During maritime mobile operation, keep the transceiver
and microphone as far away as possible from the mag-
netic navigation compass to prevent erroneous indica-
tions.
BE CAREFUL! The heatsink will become hot when op-
erating the transceiver continuously for long periods.
BE CAREFUL! If a linear amplifier is connected, set
the transceiver’s RF output power to less than the lin-
ear amplifier’s maximum input level, otherwise, the lin-
ear amplifier will be damaged.
Use Icom microphones only (supplied or optional).
Other manufacturer’s microphones have different pin
assignments and connection to the IC-746 may dam-
age the transceiver.
EXPLICIT DEFINITIONS
The explicit definitions described below apply to this in-
struction manual.
BUILT-IN DSP
The IC-746’s DSP digitally transposes receive audio
components in all modes of operation to produce de-
sired AF frequency characteristics at the IF stage of
the transceiver. DSP provides the following functions:
➩Noise reduction—reduces various types of noise
and enhances receive signal components only.
➩
Automatic notch filter—automatically reduces single
beat interference and protects the receive voice signals.
➩Selectable APF—a total of 3 passband widths are
selectable (80/160/320 Hz), for super-narrow filter
APF functions in CW mode. The APF center fre-
quency is adjustable.
DSP
iii
TABLE OF CONTENTS
IMPORTANT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
EXPLICIT DEFINITIONS . . . . . . . . . . . . . . . . . . . . . ii
BUILT-IN DSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . iii
1 PANEL DESCRIPTION . . . . . . . . . . . . . . . . . . 2–7
1-1 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
1-2 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1-3 Function display . . . . . . . . . . . . . . . . . . . . . . . 7
2 MENU SELECTION . . . . . . . . . . . . . . . . . . . . . 8–9
2-1 Menu set 1 flow chart . . . . . . . . . . . . . . . . . . . 8
2-2 Menu set 2 flow chart . . . . . . . . . . . . . . . . . . . 9
3 BASIC OPERATION . . . . . . . . . . . . . . . . . . 10–17
3-1 Before operating . . . . . . . . . . . . . . . . . . . . . . 10
3-2 Squelch and receive (RF) sensitivity . . . . . . 12
3-3 Selecting VFO/memory mode . . . . . . . . . . . 13
3-4 Toggling between VFO A/B and transferring
contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3-5 Setting a band and frequency . . . . . . . . . . . 14
3-6 Selecting an operating mode . . . . . . . . . . . . 17
4 USING DIFFERENT OPERATING MODES . 18–36
4-1 Operating SSB . . . . . . . . . . . . . . . . . . . . . . . 18
4-2 Operating CW . . . . . . . . . . . . . . . . . . . . . . . . 20
4-3 Operating RTTY (FSK) . . . . . . . . . . . . . . . . . 28
4-4 Operating AM . . . . . . . . . . . . . . . . . . . . . . . . 30
4-5 Operating FM . . . . . . . . . . . . . . . . . . . . . . . . 32
4-6 Repeater operation . . . . . . . . . . . . . . . . . . . 34
4-7 Packet operation . . . . . . . . . . . . . . . . . . . . . . 36
5 FUNCTIONS FOR RECEIVE . . . . . . . . . . . . 37–42
5-1 Simple band scope . . . . . . . . . . . . . . . . . . . . 37
5-2 Preamp and attenuator . . . . . . . . . . . . . . . . 38
5-3 RIT function . . . . . . . . . . . . . . . . . . . . . . . . . 38
5-4 AGC function . . . . . . . . . . . . . . . . . . . . . . . . 39
5-5 1/4 function . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5-6 NB function . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5-7 Noise reduction . . . . . . . . . . . . . . . . . . . . . . 40
5-8 Auto notch (ANF) function . . . . . . . . . . . . . . 40
5-9 Dial lock function . . . . . . . . . . . . . . . . . . . . . 40
5-10 Twin PBT . . . . . . . . . . . . . . . . . . . . . . . . . . 41
5-11 Selecting IF filters . . . . . . . . . . . . . . . . . . . . 42
6 FUNCTIONS FOR TRANSMIT . . . . . . . . . . . 43–48
6-1 VOX function . . . . . . . . . . . . . . . . . . . . . . . . . 43
6-2 Break-in function . . . . . . . . . . . . . . . . . . . . . 44
6-3 :TX function . . . . . . . . . . . . . . . . . . . . . . . . 45
6-4 Monitor function . . . . . . . . . . . . . . . . . . . . . . 45
6-5 Speech compressor . . . . . . . . . . . . . . . . . . . 46
6-6 Split frequency operation . . . . . . . . . . . . . . . 47
6-7 Quick split function . . . . . . . . . . . . . . . . . . . . 48
7 MEMORY CHANNELS . . . . . . . . . . . . . . . . 49–54
7-1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
7-2 Memory channel selection . . . . . . . . . . . . . . 49
7-3 Transferring a memory to VFO . . . . . . . . . . . 50
7-4 Clearing a memory . . . . . . . . . . . . . . . . . . . . 50
7-5 Selecting the call channel . . . . . . . . . . . . . . 51
7-6 Programming a memory . . . . . . . . . . . . . . . . 51
7-7 Programming the call channel . . . . . . . . . . . 52
7-8 Programming scan edges . . . . . . . . . . . . . . 52
7-9 Assigning memory names . . . . . . . . . . . . . . 53
7-10 Memo pads . . . . . . . . . . . . . . . . . . . . . . . . 54
8 SCAN OPERATION . . . . . . . . . . . . . . . . . . . 55–58
8-1 Scan types . . . . . . . . . . . . . . . . . . . . . . . . . . 55
8-2 Programmed scan and
fine programmed scan . . . . . . . . . . . . . . . . . 56
8-3 Memory scan . . . . . . . . . . . . . . . . . . . . . . . . 57
8-4 Select memory scan . . . . . . . . . . . . . . . . . . . 57
8-5 :F scan and fine :F scan . . . . . . . . . . . . . . 58
9 INTERNAL ANTENNA TUNER . . . . . . . . . . . . . 59
9-1 Before operating . . . . . . . . . . . . . . . . . . . . . . 59
9-2 Tuner operation . . . . . . . . . . . . . . . . . . . . . . . 59
10 SET MODE . . . . . . . . . . . . . . . . . . . . . . . . . 60–64
10-1 Selecting set mode . . . . . . . . . . . . . . . . . . . 60
10-2 Set mode items . . . . . . . . . . . . . . . . . . . . . 60
11 ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . 65–66
11-1 Tuning dial brake . . . . . . . . . . . . . . . . . . . . 65
11-2 Frequency calibration . . . . . . . . . . . . . . . . . 65
11-3 Measuring SWR . . . . . . . . . . . . . . . . . . . . . 66
11-4 Adjusting the LCD . . . . . . . . . . . . . . . . . . . 66
12 SETUP AND CONNECTIONS . . . . . . . . . . 67–75
12-1 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . 67
12-2 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . 68
12-3 Selecting a location . . . . . . . . . . . . . . . . . . 69
12-4 Power supply connections . . . . . . . . . . . . . 69
12-5 Grounding . . . . . . . . . . . . . . . . . . . . . . . . . 70
12-6 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
12-7 Data communications . . . . . . . . . . . . . . . . . 72
12-8 RTTY connections . . . . . . . . . . . . . . . . . . . 73
12-9 Remote jack . . . . . . . . . . . . . . . . . . . . . . . . 74
13 OPTIONAL INSTALLATIONS . . . . . . . . . . 76–80
13-1 Opening the transceiver’s case . . . . . . . . . 76
13-2 UT-102
VOICE SYNTHESIZER UNIT
. . . . . . . . . 77
13-3 CR-282
HIGH STABILITY CRYSTAL UNIT
. . . . . 77
13-4 Optional IF filters . . . . . . . . . . . . . . . . . . . . 78
13-5 Linear amplifier connections . . . . . . . . . . . 79
13-6 External antenna tuner connections . . . . . . 80
14 MAINTENANCE . . . . . . . . . . . . . . . . . . . . . 81–83
14-1 Fuse replacement . . . . . . . . . . . . . . . . . . . 81
14-2 Resetting the CPU . . . . . . . . . . . . . . . . . . . 81
14-3 Troubleshooting . . . . . . . . . . . . . . . . . . . . . 82
15 SPECIFICATIONS AND OPTIONS . . . . . . 84–85
15-1 Specifications . . . . . . . . . . . . . . . . . . . . . . . 84
15-2 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Produktspezifikationen

Marke: Icom
Kategorie: Empfänger
Modell: IC-746

Brauchst du Hilfe?

Wenn Sie Hilfe mit Icom IC-746 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Icom

Icom

Icom IC-4008E Bedienungsanleitung

5 Oktober 2024
Icom

Icom AT-140 Bedienungsanleitung

5 Oktober 2024
Icom

Icom IC-M120 Bedienungsanleitung

29 September 2024
Icom

Icom IC-502A Bedienungsanleitung

28 September 2024
Icom

Icom IC-M600E Bedienungsanleitung

22 September 2024
Icom

Icom IC-471H Bedienungsanleitung

22 September 2024
Icom

Icom IC-PS25 Bedienungsanleitung

21 September 2024
Icom

Icom IC-H12 Bedienungsanleitung

21 September 2024
Icom

Icom IC-PW1 Bedienungsanleitung

18 September 2024
Icom

Icom IC-211 Bedienungsanleitung

17 September 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024