Husqvarna Rider 318 Bedienungsanleitung

Husqvarna RasenmĂ€her Rider 318

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Husqvarna Rider 318 (1 Seiten) in der Kategorie RasenmĂ€her. Dieser Bedienungsanleitung war fĂŒr 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
PACKAGING/DELIVERY INSPECTION
1. Visually inspect the product and its packaging for transportation damage and missing components.
TECHNICAL INSPECTION
2. Check, charge and connect the battery. Measure battery voltage (should be above 12.7V before delivery).
3. Check and ïŹt the steering wheel, seat, hook for rear accessories and check and adjust the tyre pressure.
4. Install the cutting deck, adjust lift springs, adjust the cutting deck and the unit’s height setting.
5. Check the oil level in the engine and if necessary, ïŹll up with recommended Husqvarna oil SAE 10W/40 to be able to start and test.
6. Check the oil level in the transmission(s) and ïŹll up with recommended Husqvarna oil (SAE 10W/50 for AWD models and SAE 10W/40
for 2 WD models) if necessary.
7. Check the belt positions and belt tensioners.
8. Fill with enough fresh fuel to be able to start and to test the engine on different RPM speeds. Always recommend Husqvarna fuel for
best perfomance.
9. Check the lights and other electrical components.
10. Check for any leaks from the hydraulic and fuel system.
SAFETY INSPECTION
11. Verify that the machine does not move in neutral and check forward and reverse drive on different speeds. Check the brake function.
12. Check the blade engagement and safety switches on seat, lift and drive/brake pedal.
SERVICE & DELIVERY
13. Inform the customer of the correct starting/stopping procedure, other safety features and necessary personal protective equipment.
14. Inform the end customer about recommended maintenance and remind the customer to book a time for recommended
ïŹrst service. (See maintenance plan in operator’s manual).
15. Register the product in the Husqvarna Product Registration System.
Important to inform customer:
16. Hand over the operator’s manual to the end customer and instruct the customer to read it before use.
17. The transmission guarantee is only valid if the synchronisation of the front and rear wheels has been checked and adjusted in
compliance with the service schedule. The system will be damaged if synchronisation is not carried out.
18. Inform about Bio Clip system and other accessories.
NOTE! In the event of shipping products containing batteries, the dealer is responsible to assure shipment of the
product in accordance with applicable rules and regulations.
The PDI document itself is not a proof of purchase. Make sure to keep the printed receipt (proof of purchase)
together with the PDI document. In case of future defects please contact the dealer from which the product was bought.
MODEL PNC SERIAL NUMBER
DEALER NAME
CUSTOMER SIGNATURE DATE
DATE
114 31 16-26
Completion of this Pre-Delivery Inspection is mandatory for the dealer to
ensure the product is ready to be used when given to the end customer.
Some models may be subject to optional Pre-Delivery Inspection.
See SELDIS Contract, Appendix D for further details.
Tick
below
PETROL RIDERS
PDI Checklist
Stamp


Produktspezifikationen

Marke: Husqvarna
Kategorie: RasenmÀher
Modell: Rider 318

Brauchst du Hilfe?

Wenn Sie Hilfe mit Husqvarna Rider 318 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung RasenmÀher Husqvarna

Bedienungsanleitung RasenmÀher

Neueste Bedienungsanleitung fĂŒr -Kategorien-