Husqvarna 345FR Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Husqvarna 345FR (42 Seiten) in der Kategorie Rasenmäher. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/42
EEEEnnnngggglllliiiisssshhhh
345FR 545FX 545FXT
545RX 545RXT
Operator′s manual
Please read the operator’s manual carefully and make sure you understand the instructions
before using the machine.
KEY TO SYMBOLS
2 – English
Symbols
WARNING! Clearing saws,
brushcutters and trimmers can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others. It is extremely
important that you read and
understand the contents of the operator's manual.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Wear a protective helmet where
there is a risk of falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
This product is in accordance
with applicable EC directives.
Watch out for thrown objects and
ricochets.
The operator of the machine must
ensure, while working, that no
persons or animals come closer than
15 meters.
Machines tted with saw blades or
grass blades can be thrown violently
to the side when the blade comes
into contact with a xed object. This is
called blade thrust. The blade is
capable of amputating an arm or leg.
Always keep people and animals at least 15 meters from
the machine.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Air purge
Choke: Set the choke control in the
choke position.
Decompression valve: The valve is to
reduce the pressure in the cylinder and
make starting easier. You should always
use the decompression valve when
starting the machine.
Heated handles
Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with
trimmer cord.
Noise emission to the environment
according to the European
Community’s Directive. The
machine’s emission is specified in
the Technical data chapter and on the
label.
Other symbols/decals on the
machine refer to special
certication requirements for certain markets.
Switch off the engine by moving the
stop switch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
50FT
15 m
50FT
15 m
CONTENTS
English – 3
Contents
KEY TO SYMBOLS
Symbols ................................................................ 2
CONTENTS
Contents ............................................................... 3
INTRODUCTION
Dear Customer, .................................................... 4
WHAT IS WHAT?
What is what on the brush cutter? ........................ 5
GENERAL SAFETY PRECAUTIONS
Measures to take before using new clearing saws,
brushcutters or trimmers. ...................................... 6
Important .............................................................. 6
Personal protective equipment ............................. 7
Machine′s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBLY
Assembling the handlebar and throttle ................. 13
Transport position, handlebar ............................... 13
Assembling the cutting equipment ....................... 13
Fitting the guard extension ................................... 14
Fitting the blade guard/combination guard, grass
blade and grass cutter .......................................... 14
Fitting the blade guard and saw blade .................. 15
Fitting other guards and cutting attachments ....... 16
Adjusting the harness and brush cutter ................ 16
Balance X ............................................................. 16
Balance XT ........................................................... 17
FUEL HANDLING
Fuel safety ............................................................ 19
Fuel ...................................................................... 19
Fueling .................................................................. 20
STARTING AND STOPPING
Check before starting ........................................... 21
Starting and stopping ........................................... 21
WORKING TECHNIQUES
General working instructions ................................ 23
MAINTENANCE
Carburettor ........................................................... 27
Muffler .................................................................. 27
Cooling system ..................................................... 28
Air lter ................................................................. 28
Bevel gear ............................................................ 29
Drive shaft ............................................................ 29
Spark plug ............................................................ 29
Winter use ............................................................ 29
Maintenance schedule ......................................... 32
TECHNICAL DATA
Technical data ...................................................... 33
EC Declaration of Conformity ............................... 36


Produktspezifikationen

Marke: Husqvarna
Kategorie: Rasenmäher
Modell: 345FR

Brauchst du Hilfe?

Wenn Sie Hilfe mit Husqvarna 345FR benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Rasenmäher Husqvarna

Bedienungsanleitung Rasenmäher

Neueste Bedienungsanleitung fĂźr -Kategorien-