Hotpoint SH6 1Q W 1 Bedienungsanleitung

Hotpoint Gefrierschrank SH6 1Q W 1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hotpoint SH6 1Q W 1 (1 Seiten) in der Kategorie Gefrierschrank. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

1. Fan*

2. Electronic control panel / light unit

3. Bottle rack*

4. Sensor cover

5. Area shelves

6. Rating plate with commercial name

7. Fruits and vegetables crisper*

8. Door reversibility kit

9. Bottle holder*

10. Door trays

11. Door seal

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically. After starting the appliance, wait

at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply,

the display lights up and all the icons appear on the

display for approximately 1 second. The default (factory)

values of the fridge compartment settings light-up.

HOW TO REVERSE THE DOOR SWING

- see enclosed Instructions for Use (Version_2)

Is recommended to reverse door swing by two persons.

There is not foreseen door reversibility for:

- models with integrated handle

- models with glass panel on the door.

Specifications, technical data and images may vary

from model to model

To receive the assistance call the number shown on

the warranty booklet or follow the instruction on the

web site www.hotpoint.eu

811

Read the Instructions for Use carefully before

using the appliance.

19514452700

QUICK START GUIDE

ALARMS TABLE

ALARM TYPE Signal Cause Cure

Door open alarm Refrigerator Light blinks The door has remained open for more than 5 minutes. Close the door

Door open alarm Refrigerator Light OFF The door has remained open for more than 8 minutes. Close the door

Malfunction Any temperature indicators blinks Product malfunction. Contact the After-sales Service

FAN

The fan improves temperature distribution inside the refrigerator compartment,

allowing better preservation of stored food.

By default, the fan is switched on.

It is advisable to keep the fan switched on when the ambient air temperature is above

27 - 28°C or if you notice drops of water on the glass shelves or in sever humidity

conditions.

To turn off the fan press the button of fan.

Please note that when the fan is switched on it will not continuously work. The fan

will start/stop working depending on the temperature and/or humidity level inside the

fridge.

It is therefore absolutely normal if the fan does not move even if the fan is switched

on.

on - o

TEMPERATURE button

Press the Temperature button on the control panel to adjust the temperature from the

warmest through the lower to the coldest level.

Pressing the Temperature button, the temperature setting will change cyclically.

At first plug-in of appliance temperature setpoint is present at medium position

(factory setting).

Following table shows temperature setpoints:

Note: Displayed set points correspond to the average temperature

throughout the whole refrigerator.

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

REFRIGERATOR LIGHT

The light system inside the refrigerator compartment uses LEDs

light, allowing a better lightning as well as a very low energy

consumption.

If the LED light system does not work, please contact the

Service to replace it.

Important: The refrigerator compartment light switches on

when the refrigerator door is opened. If the door is kept open for

more then 8 minutes the light will be automatically switched off.

Indicator LEDs to display the current temperature

setpoint or the Fast Cooling function.

FAST COOLING function

The use of the Fast Cooling function is recommended:

- to increase the cooling speed of the refrigerator

compartment when placing a very high quantity of food

within it,

To activate the Fast Cooling function, press and hold

for 3 seconds the Temperature button on the control

panel till all the 3 LEDs will turn on.

The function is automatically deactivated after 6 hours

and return to previous selected set point. The function

can be manually deactivated by pressing and holding for

3 seconds the Temperature button on the control panel.

TEMPERATURE button

FAST COOLING button

Led ON Led OFF

Produktspezifikationen

Marke:	Hotpoint
Kategorie:	Gefrierschrank
Modell:	SH6 1Q W 1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotpoint SH6 1Q W 1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Gefrierschrank Hotpoint

Hotpoint HCM4SMWW Bedienungsanleitung

11 Oktober 2024

Hotpoint UH8 F1C G UK Bedienungsanleitung

2 Oktober 2024

Hotpoint UPS 1721_HA Bedienungsanleitung

21 September 2024

Hotpoint HUF13LTRWW Bedienungsanleitung

5 September 2024

Hotpoint E2BL 19213 F O3 (TK) Bedienungsanleitung

3 September 2024

Hotpoint HBC18 5050 F1 Bedienungsanleitung

22 August 2024

Hotpoint H7NT 911T W H 1 Bedienungsanleitung

22 August 2024

Hotpoint RLA36G 1 Bedienungsanleitung

21 August 2024

Hotpoint UH8 F1C G UK 1 Bedienungsanleitung

19 August 2024

Hotpoint H5T 811I MX H 1 Bedienungsanleitung

18 August 2024

Bedienungsanleitung Gefrierschrank

Neueste Bedienungsanleitung für -Kategorien-

Freggia LUF246W Bedienungsanleitung

16 Oktober 2024

Freggia LUF193X Bedienungsanleitung

16 Oktober 2024

Freggia LUF193W Bedienungsanleitung

16 Oktober 2024

Freggia LUF246X Bedienungsanleitung

16 Oktober 2024

Freggia LC21 Bedienungsanleitung

16 Oktober 2024

Royal Catering RCFZ-459-1 Bedienungsanleitung

15 Oktober 2024

Hisense HRCF501 Bedienungsanleitung

15 Oktober 2024

Royal Catering RCGK-BC96 Bedienungsanleitung

15 Oktober 2024

Royal Catering RCFZ-W88L Bedienungsanleitung

15 Oktober 2024

Royal Catering RCGK-BC30 Bedienungsanleitung

15 Oktober 2024