Hotpoint RD 966 JD UK N Bedienungsanleitung

Hotpoint Waschmaschine RD 966 JD UK N

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hotpoint RD 966 JD UK N (4 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Quick Guide

CONTROL PANEL

1. ON/OFF button

2. DRYING button

3. DRYING ONLY button

4. MULTI RINSE button

5. OPTION button

6. DIRECT INJECTION button

7. START/PAUSE button and indicator light

8. KEY LOCK button

9. DELAY TIMER button

10. SPIN button

11. TEMPERATURE button

12. AUTO CLEAN button

13. WASH CYCLE SELECTOR KNOB

WASH CYCLE TABLE

PRODUCT DESCRIPTION

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the

appliance on www.hotpoint.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more

detailed instructions on how to remove them, see the Installation Guide.

DETERGENT DISPENSER DRAWER

Compartment *:

Do not insert detergent in this compartment.

Compartment 1: Washing detergent (powder

or liquid)

If liquid detergent is used, the removable plastic

partition (supplied) should be used for proper A

dosage.

If powder detergent is used, place the partition

into slot .B

Compartment 2: Additives (fabric softeners, etc.)

The fabric softener must not exceed the “MAX”

level.

! Use powder detergent for white cotton garments, for pre-washing, and

for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

13 7891011

1 2 4

DISPLAY

5 63

For all testing institutes:

2) Long cotton cycle: set programme 3 at temperature 40°C.

3) Long synthetics cycle: set cycle 4 at a temperature of 40°C.

* By selecting the cycle and excluding the spin cycle, the washer-dryer will drain only.

** The duration of the wash cycles can be checked on the display.

*** After programme end and spinning with maximum selectable spin speed, in default

programme setting.

**** If a drying cycle is also programmed, the machine will run a “wash+dry” programme

lasting 45’ and a 1kg laundry load.

The cycle duration indicated on the display or instruction manual is an estimate based on

standard conditions. The actual duration may vary in relation to several factors, such as the

temperature and pressure of the incoming water, ambient temperature, amount of detergent,

load quantity and type, load balancing and any additional options selected.The values given

for programmes other than the Eco 40-60 programme are indicative only.

1) Eco 40-60 (Wash) - Test wash cycle in compliance with EU Ecodesign regulation

2019/2014. The most ecient programme in terms of energy and water consumption for

washing normally soiled cotton laundry.

Note: spin speed values shown on the display can slightly diers from the values stated in the table.

4) Eco 40-60 (Wash & Drying)-

Test

wash and

drying cycle in compliance with EU

Ecodesign regulation

2019/2014

. To access “wash and dry” cycle select “Eco 40-60” wash

programme and set “Drying” option level to

“

Cupboard

”.

The most ecient programme

in terms of energy and water consumption for washing and drying normally soiled cotton

laundry. At the end of cycle the garments can be immediately stored to the cupboard.

Maximum load 9 kg

Power input in o mode 0.5 W / in left-on mode 8 W Detergents and

Additives Recommended

detergent

Residual

dampness %

(***)

Energy

consumption

kWh

Total water lt

Laundry

temperature °C

Wash cycle Temperature Max.

spin speed

(rpm)

Max.

load for

washing

(kg)

Duration

(h : m)

Drying

Max.

load for

drying

(kg)

Wash Fabric

softener

Powder

Liquid

Setting Range 2 3

1Anti-Stain Turbo

(Anti-Stain Turbo 45‘) 40 °C - 40 °C 1200 4.5 ** 4.5   –– – – –

2Anti-Stain 20°

(Anti-Stain Power 20°) 20 °C - 20 °C 1600 9.0 ** 6.0   –– – – –

3 Cotton (2) 40 °C - 60 °C 1600 9.0 3:55 6,0     49 1,40 105 45

4 Synthetics (3) 40 °C - 60 °C 1200 4.0 2:55 4.0     35 0.80 55 43

5Rapid 30’

(Fast 30’) 30 °C - 30 °C 800 4.5 0:30 4.5****   –71 0.20 45 27

6Mix Wash & Dry

(Wash & Dry Mix) 40 °C 800 3.5 **40 °C 3.5   –– – – –

7 Shirts Wash & Dry 40 °C 1000 2.0 **40 °C 2.0   –– – – –

8 Wool 40 °C - 40 °C 800 2.0 ** 2.0   –– – – –

9Eco 40-60 (1)

(Wash) 40 °C 40°C

1551 9.0 3:40 

6.0

    44,5 1.01 60 36

1551 4.5 2:50      44,5 0.75 54 36

1551 2.25 2:10      44,5 0.55 39 33

10 20°C 20 °C - 20 °C 1600 9.0 1:50 6.0   –49 0.16 90 22

11 White

(Whites) 60 °C - 90 °C 1600 9.0 2:45 6.0     49 0.90 90 55

12 Anti Allergy 60°C 1600 5.0 **40 °C - 60 °C 5.0     – – – –

13 Steam Refresh – – – 2.0 ** – – – – – – – – – –

14 Ultradelicates

(Ultra Delicates) 30 °C - 30 °C – 1.0 ** 1.0   –– – – –

Rinse&Spin

(Rinse) – – 1600 9.0 ** 6.0 – – – – – – –

Spin&Drain *

(Spin + Pump out) – – 1600 9.0 ** 6.0 – – – – – – – –

  Required dosage Optional dosage

9Eco 40-60 (4)

(Wash & Drying) 40 °C 40 °C 1551 6.0 9:55 6.0     0 4.50 80 36

1551 3.0 6:10 3.0     0 2.50 55 35

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Anti-Stain Turbo

This cycle is ideal for washing daily stains in 45’. It is ideal for mixed fabrics

and coloured garments.

Anti-Stain 20°C

this programme ensures maximum stain removal capacity with no need

for pre-treatment at low temperatures, preserving fabrics and colours.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of

resistant linen and cotton that are moderately to heavily soiled.

Synthetics

Specic for synthetic items. If the dirt is dicult to remove, the

temperature can be increased up to 60° and powder detergent can be

used too.

Rapid 30’

For washing lightly soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Mix Wash & Dry

use programme 6 to wash and dry mixed garments (cotton and

synthetics). This cycle may be used to wash and dry loads of up to 3.5 kg;

we recommend the use of liquid detergent.

The use of the steam in this programme is optimised to reduce the

formation of creases on garments, making them easier to iron.

Shirts Wash & Dry

Use programme 7 to wash and dry shirts and T-shirts in dierent fabrics

and colours to ensure maximum care. This cycle may be used to wash and

dry loads of up to 2 kg. To achieve optimum results, use liquid detergent

and pre-treat cus, collars and stains. The use of the steam in this

programme is optimised to reduce the formation of creases on garments,

making them easier to iron.

Wool - Woolmark Apparel Care - Green:

the wool wash cycle of this machine has been approved

by The Woolmark Company for the washing of wool

garments labelled as “hand wash” provided that the

products are washed according to the instructions on the

garment label and those issued by the manufacturer of

this washer-dryer. (M1318)

Eco 40-60

For washing normally soiled cotton garments declared to be washable at 40 °C

or 60 °C, together in the same cycle. This is the standard cotton programme

and the most ecient in terms of water and energy consumption.

20°C

For washing lightly soiled cotton garments, at a temperature of 20 °C.

White

For heavily soiled whites and resistant colours.

Anti Allergy

Suitable for removing major allergens such as pollen, mites and cat or

dog hair.

Steam Refresh

For refreshing garments, neutralised unpleasant odours and relaxing the

bres by delivering steam into the drum. The garments will be damp at

the end of the cycle.

Ultradelicates

For washing very delicate garments. It is advisable to turn the garments

inside out before washing them. For best results, use liquid detergent on

delicate garments.

We recommend turning the garments inside out before washing and

placing small items into the special bag for washing delicates. Use liquid

detergent on delicate garments for best results.

When selecting an exclusively time-based drying function, a drying cycle

is performed at the end of the wash cycle that is particularly delicate,

thanks to light handling and appropriate temperature control of the

water jet.

The recommended durations are:

1 kg of synthetic garments --> 165 min

1 kg of synthetic and cotton garments --> 180 min

1 kg of cotton garments --> 180 min

The degree of dryness depends on the load and fabric composition.

Rinse&Spin

Designed for rinsing and spinning.

Spin&Drain

Designed for spinning and draining the water.

DISPLAY

The display is useful when programming the machine and provides a

great deal of information.

The following will appear in area : the icon and programme selected, the A

washing and drying phases and time remaining to the end of the cycle.

Area will include the two intensity levels relative to the DIRECT B

INJECTION option. The indicator lights relative to the available functions

appear in area . Area will display the time remaining to the start of the C D

selected cycle if the DELAY TIMER function was set.

Area will display the maximum available spin speed on the basis of the E

set cycle; if the cycle does not include the spin cycle setting, the dimly lit

“ ” symbol will appear in the area.--

Area will show the temperature value that can be selected on the basis F

of the set cycle.

If the cycle does not include setting of the temperature, the dimly lit “--”

symbol will appear in the area.

! The rst time the machine is switched on, you will be asked to select the

language and the display will automatically show the language selection

menu.

To select the desired language press the and buttons; to conrm the X Y

selection press the button.Z

To change the language switch o the machine and press buttons , , G H I

simultaneously until an alarm is heard: the language-selection menu will

be displayed again.

! To change the display luminosity, which by default is set to the highest

value, switch the machine o then simultaneously press buttons , and G L

M until the buzzer sounds.

Press buttons and to choose the desired level of luminosity then X Y

conrm by pressing button .Z

! During the wash cycle or when the DELAY TIMER function has been

enabled, if the user does not interact with the display for 1 minute the

SCREEN SAVER activates. To return to the previous window, simply press

any button.

LOCKED DOOR INDICATOR

When lit, the symbol indicates that the door is locked. To prevent any

damage, wait until the symbol turns o before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button ; if the symbol is o, the door can be opened.

FIRSTTIME USE

Once the appliance has been installed, and before it is used for the rst

time, run a wash cycle with detergent and no laundry, by setting the “Auto

Clean” cycle.

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; “HOTPOINT” will appear on the display; the

indicator light relative to the START/PAUSE button will ash slowly

green.

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments, as described in the “DETERGENT DISPENSER

DRAWER” section.

- Close the door.

- Use the WASH CYCLE selector knob to select the desired wash cycle: the

cycle’s name will appear on the display; the cycle will be associated with a

specic temperature and spin speed which can be modied. The duration

of the cycle will appear on the display.

- Modify the temperature and/or spin speed: the machine automatically

selects the maximum temperature and spin speed set for the selected

wash cycle; these values cannot therefore be increased. Pressing the

button gradually reduces the temperature down to the cold wash setting

(the “--” symbol will appear on the display). Pressing the button

gradually reduces the spin speed until it is completely excluded (the “--”

symbol will appear on the display). Pressing the buttons further restores

the maximum allowed values for the selected cycle.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative

indicator light will light up steady green and the door will lock (

symbol on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the

indicator light will ash amber. To start the wash cycle from the point at

which it was interrupted, press the START/PAUSE button again.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE button (the relative indicator light will ash

amber), then select the desired cycle and press the START/PAUSE

button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

This will be indicated by the word “CYCLE END” on the display; when the

symbol switches o, the door may be opened. Open the door and

switch o the machine. If you do not press ON/OFF button, the

washing machine will switch o automatically after about a 10 minutes.

Close the water tap and unload the washing machine. Leave the door ajar

to allow the drum to dry.

2:55

90° 1200 -- h

COTONE

YX Z

L M

OPTIONS

- If the selected function is incompatible with the set wash cycle, the

relevant indicator light will appear dimly lit; the incompatibility will also

be signalled by a buzzer (3 beeps) and the wording “ ” will No Selection

appear on the display.

- If the selected function is incompatible with another previously set

function, the wording “ ” will appear on the display and No Selection

the function will not be enabled.

Steam Hygiene

This option enhances washing performance by generating steam during

the wash cycle to remove any bacteria from the bres, which are treated

at the same time. Place the laundry in the drum, choose a compatible

programme and select option .

! The steam generated during the operation of the washer-dryer may

cause the porthole door to become hazy.

Delay Timer

To set a delayed start for the selected cycle, press the corresponding button

repeatedly until the desired delay period is reached. To remove the delayed

start setting, press the button until “ ” appears on the display.-- h

Temperature

Each wash cycle has a pre-dened temperature. To modify the

temperature, press the button. The value will appear on the display.

Spin

Each wash cycle has a pre-dened spin speed. To modify the spin speed,

press the button. The value will appear on the display.

Direct Injection

The washer-dryer is equipped with the innovative technology «Direct

Injection» which pre-mixes water and detergent, thus immediately

activating the detergent’s cleaning principles. This active emulsion is

directly introduced into the drum of the washer-dryer and penetrates the

bres with more ecacy in cleaning even heavily soiled garments at low

temperatures, fully preserving colours and fabrics.

The mode «Power» ensures the best cleaning performance and the mode

«Energy Saver» allows more energy saving.

Drying

The desired drying cycle type may be set by pressing the DRYING button

once or several times. Two options are available:

A - Based on the how damp the clothes are once they have been dried:

Iron: suitable for clothes which will need ironing afterwards. the

remaining dampness softens creases, making them easier to remove.

Hanger: ideal for clothes which do not need to be dried fully.

Cupboard: suitable for laundry which can be put back in a cupboard

without being ironed.

Extra: suitable for garments which need to be dried completely, such as

sponges and bathrobes.

B 30 180 - Based on a set time period: between and minutes.

To exclude the drying phase press the relevant button until the text OFF

appears on the display.

If your laundry load to be washed and dried is much greater than the

maximum stated load, perform the wash cycle, and when the cycle is

complete, divide the garments into groups and put some of them back

in the drum. At this point, follow the instructions provided for a “Drying

only” cycle. Repeat this procedure for the remainder of the load. A

cooling-down period is always added to the end of each drying cycle.

Drying only

Press button to perform the drying-only cycle.

After selecting the desired cycle (compatible with the type of garments),

press button to exclude the washing phase and start the drying

phase at the maximum level for the selected cycle. The drying level or

time may be set and changed by pressing the drying button .

Multi Rinse

This option allows for selecting the desired rinse type to protect sensitive

skin. Press the button once to set level “ ”, which allows for selecting Extra +1

an additional rinse to the standard cycle rinses and removing all traces of

detergent. Press the button again to set level “ ”, which allows for Extra +2

selecting two additional rinses to the standard cycle rinses; this cycle is

recommended for very sensitive skin. When the button is pressed for the

third time, the “ ” level is set, which allows for selecting 3 additional Extra +3

rinses to the standard cycle rinses. When started with cycles at a temperature

of 40°C, this option makes it possible to remove major allergens such as

pollen and cat or dog hair. With cycles running at temperatures higher than

40°C, an excellent level of anti-allergy protection is achieved. Press the button

again to return to the “Normal Rinse” mode. If the current mode cannot be

set nor changed, the display will show “No Selection” or “No Change”.

KEY LOCK

To activate the control panel lock, press and hold the button for

roughly 2 seconds. When the display visualises “KEY LOCK ON”, the control

panel is locked (except for the ON/OFF button ). This will prevent

accidental modications to wash cycles, especially when children are at

home. To deactivate the control panel lock, press and hold the

button for approximately 2 seconds.

TIPS AND SUGGESTIONS

Divide the laundry according to:

Type of fabric (cotton, mixed bres, synthetics, wool, garments to be

hand-washed). Colour (separate coloured garments from whites, wash new

coloured garments separately). Delicates (small garments – such as nylon

stockings – and items with hooks – such as bras: insert them in a fabric bag).

Empty the pockets:

Objects such as coins or lighters can damage the washer-dryer and the

drum. Check all buttons.

Follow the dosage recommendation / additives

It optimizes the cleaning result, it avoids irritating residues of surplus detergent

in your laundry and it saves money by avoiding waste of surplus detergent.

Use low temperature and longer duration

The most ecient programmes in terms of energy consumption are generally

those that perform at lower temperatures and longer duration.

Observe the load sizes

Load your washing machine up to the capacity indicated in the “Wash Cycle

Table” table to save water and energy.

Noise and remaining moisture content

They are inuenced by the spinning speed: the higher the spinning speed

in the spinning phase, the higher the noise and the lower the remaining

moisture content.

CARE AND MAINTENANCE

Before performing cleaning and maintenance, switch the washer-dryer o

and disconnect it from the mains power. Do not use ammable liquids to

clean the washer-dryer. Clean and maintain your washer-dryer periodically

(at least 4 times per year).

Cutting o the water and electricity supplies

Turn o the water tap after every wash cycle. This will limit wear on the

hydraulic system inside the washer-dryer and help to prevent leaks.

Unplug the washer-dryer when cleaning it and during all maintenance work.

Cleaning the washer-dryer

The outer parts and rubber components of the appliance can be cleaned using

a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.

The washer-dryer has a “Auto Clean” cycle for its internal parts; it must be

run without any load in the drum.

To help the wash cycle you may want to use either the detergent (i.e. a

quantity 10% the quantity specied for lightly-soiled garments) or special

additives to clean the washer-dryer. We recommend running a cleaning

programme every 40 wash cycles.

To activate the cycle, press the button for 5 seconds then press START/

PAUSE to start the cycle, which will last roughly 70 minutes.

Cleaning the detergent dispenser drawer

Remove the dispenser drawer by lifting and pulling it outwards. Wash it

under running water; this procedure should be eected regularly.

Caring for the door and drum

Always leave the porthole door ajar in order to prevent unpleasant odours

from forming.

Cleaning the pump

The washer-dryer is tted with a Auto Clean pump which does not require

any maintenance. Small items (such as coins or buttons) may sometimes

fall into the protective pre-chamber situated at the base of the pump.

! Make sure that the wash cycle has ended and unplug the appliance.

To access the pre-chamber:

1. remove the covering panel on the front side of the machine by inserting

a screwdriver in the centre and sides of the panel and using it as a lever;

2. loosen the drainage pump cover by turning it anti-clockwise: it is

normal for some water to leak out;

3. clean the inside thoroughly;

4. screw the cover back on;

5. put the panel back in place, making sure the hooks slot in place before

pushing the panel onto the appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If it is cracked or broken, it must

be replaced: during wash cycles, the high pressure of the water could

suddenly split the hose open.

! Never use hoses that have already been used.

LOAD BALANCING SYSTEM

Before every spin cycle, to avoid excessive vibrations before every

spin and to distribute the load in a uniform manner, the drum rotates

continuously at a speed which is slightly greater than the washing

rotation speed. If, after several attempts, the load is not balanced

correctly, the machine spins at a reduced spin speed. If the load is

excessively unbalanced, the washing machine performs the distribution

process instead of spinning. To encourage improved load distribution and

balance, we recommend small and large garments are mixed in the load.

ACCESSORIES

Contact our Technical Assistance Service to check whether the following

accessories are available for this washer-dryer model.

Stacking kit

With this accessory you can secure the tumble dryer to the upper part of

your washer-dryer to save space and facilitate loading and unloading of

the tumble dryer.

TRANSPORT AND HANDLING

Do not lift the washer-dryer by gripping it from the upper section.

Unplug the appliance and close the water tap. Check that the door and

detergent dispenser drawer are tightly closed. Detach the lling hose

from the water tap then detach the drain hose. Empty all the water

remaining in the hoses and secure the latter so that they do not get

damaged during transport. Apply the transport bolts back on. Repeat, in

reverse order, the transport bolt removal procedure described in the

“Installation instructions”.

Produktspezifikationen

Marke:	Hotpoint
Kategorie:	Waschmaschine
Modell:	RD 966 JD UK N

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotpoint RD 966 JD UK N benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Waschmaschine Hotpoint

Hotpoint NSWM 963C W UK Bedienungsanleitung

15 Oktober 2024

Hotpoint HDA3420ZBB Bedienungsanleitung

9 Oktober 2024

Hotpoint NBT 1048 WD A IT Bedienungsanleitung

7 Oktober 2024

Hotpoint NBT 108 BLACK IT Bedienungsanleitung

7 Oktober 2024

Hotpoint HDA3600NBB Bedienungsanleitung

6 Oktober 2024

Hotpoint NM11 946 BC A UK Bedienungsanleitung

6 Oktober 2024

Hotpoint NM10 944 GS UK Bedienungsanleitung

6 Oktober 2024

Hotpoint HDA3640DSA Bedienungsanleitung

4 Oktober 2024

Hotpoint WMTF 722U UK N Bedienungsanleitung

3 Oktober 2024

Hotpoint NM11 945 WC A UK N Bedienungsanleitung

2 Oktober 2024

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung für -Kategorien-

Candy CS 15102D3-80 Bedienungsanleitung

16 Oktober 2024

GE GSD3715FAA Bedienungsanleitung

16 Oktober 2024

Freggia WTIE148 Bedienungsanleitung

16 Oktober 2024

Freggia WISE126R Bedienungsanleitung

16 Oktober 2024

Freggia WISE126B Bedienungsanleitung

16 Oktober 2024

Freggia WISE126 Bedienungsanleitung

16 Oktober 2024

Freggia WISA105 Bedienungsanleitung

16 Oktober 2024

Freggia WISA106 Bedienungsanleitung

16 Oktober 2024

Freggia WIA107 Bedienungsanleitung

16 Oktober 2024

Freggia WDIE14106 Bedienungsanleitung

16 Oktober 2024