Hotpoint NM11 1046 WD A UK N Bedienungsanleitung

Hotpoint Waschmaschine NM11 1046 WD A UK N

Lesen Sie kostenlos die πŸ“– deutsche Bedienungsanleitung fΓΌr Hotpoint NM11 1046 WD A UK N (2 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war fΓΌr 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
GB
Quick Guide
THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.
To receive more comprehensive assistance, register the
appliance on
www.hotpoint.eu/register
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
WASH CYCLE TABLE
For all testing institutes:
2) Long cotton cycle: set wash cycle Cotton with a temperature of 40Β°C.
3) Long synthetics cycle: set wash cycle with a temperature of 40Β°C.Synthetics
4) The display will show the suggested spin speed as default value.
* By selecting the cycle and excluding the spin cycle, the washing machine will Spin & Drain
drain only.
** The duration of the wash cycles can be checked on the display.
*** For Prewash press the β€œTemp.” button until the symbol lights up (only 90Β°).
****
After programme end and spinning with maximum selectable spin speed, in default
programme setting.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as the
temperature and pressure of the incoming water, ambient temperature, amount of detergent,
load quantity and type, load balancing and any additional options selected.The values given
for programmes other than the Eco 40-60 programme are indicative only.
1) Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The
most ecient programme in terms of energy and water consumption for washing normally
soiled cotton laundry.
Note: spin speed values shown on the display can slightly diers from the values stated in
the table.
PRODUCT DESCRIPTION
1.
3.
2.
5.
4.
7.
6.
8.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
Maximum load 10 kg
Power input in o mode 0.5 W / in left-on mode 8 W Add
Gar-
ments
( )
Detergents and
Additives
Recommended
detergent
Residual
dampness % (****)
Energy
consumption kWh
Total water lt
Laundry
temperature Β°C
Wash cycle
Temperature Max.
spin speed
(rpm)
Max.
load
(kg)
Dura-
tion
(h : m)
Pre-
wash Wash Fabric
softener Pow-
der Liquid
Setting Range 1 2 3
Eco 40-60 (1) 40 Β°C 40Β°C
1351 10,0 3:55 – – ο„Œ ο€Œ ο€Œ 53 0,82 69 31
1351 5,0 3:00 – – ο„Œ ο€Œ ο€Œ 53 0,55 56 29
1351 2,5 2:30 – – ο„Œ ο€Œ ο€Œ 53 0,29 38 25
Cotton (2) 40Β°C - 60Β°C 1400 10,0 3:55 – – ο„Œ ο€Œ ο€Œ 49 1,14 107 45
Synthetics (3) 40Β°C - 60Β°C 1200 5,5 2:55 – – ο„Œ ο€Œ ο€Œ 35 0,83 80 43
Mixed 40Β°C - 40Β°C 1400 10,0 ** ο„‘ ο„‘ – ο„Œ β€“ο€Œβ€“ – – –
Delicates 40Β°C - 40Β°C 1000 5,5 ** ο„‘ ο„‘ – ο„Œ β€“ο€Œβ€“ – – –
White 40Β°C - 90Β°C 1400 10,0 2:05 ο„‘ ο„‘ ο„‘ ο„‘ ο„Œ ο€Œ ο€Œ(***) 54 0,90 100 42
Anti Stain 40Β° 40Β°C - 40Β°C 1000 5,5 ** ο„‘ ο„‘ – ο„Œ ο€Œ ο€Œ – – – –
Rapid 30 min 30Β°C - 30Β°C 1200 (4) 5,5 0:30 ο„‘ ο„‘ – ο„Œ β€“ο€Œ71 0,21 50 27
Spin & Drain * – – 1400 10,0 ** – – – – – – – – – – –
Rinse & Spin – – 1400 10,0 ** – – – – ο„Œβ€“ – – – – –
Steam Refresh – – – 2,0 ** – – – – – – – – – – –
20Β°C 20 Β°C - 20 Β°C 1400 10,0 1:50 – – ο„Œ β€“ο€Œ55 0,20 95 22
Wool 40Β°C - 40Β°C 800 2,5 ** – – ο„Œ β€“ο€Œβ€“ – – –
Anti Allergy 60Β°C 40Β°C -
60Β°C 1400 5,5 ** – – ο„Œ ο€Œ ο€Œ – – – –
Bed & Bath 60Β°C - 60Β°C 1400 10,0 ** ο„‘ ο„‘ – ο„Œ ο€Œ ο€Œ – – – –
ο„‘ ο„Œ Dosing required Dosing optional
DETERGENT DISPENSER DRAWER
compartment 1: Pre-wash detergent
(powder)
compartment 2: Detergent for the wash
cycle (powder or liquid)
If liquid detergent is used, it is recommended
that the removable plastic partition A
(supplied) be used for proper dosage.
If powder detergent is used, place the partition
into slot B.
compartment 3: Additives (fabric softeners,
etc.)
The fabric softener should not overow the grid.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60Β°C.
! Follow the instructions given on the detergent packaging.
1
2
3
A
B
1. STEAM HYGIENE / MUTE button
2. FINAL CARE / KEY LOCK button
3. ON/OFF button
4. ACTIVE CARE button and indicator light
5. START/PAUSE button
6. RAPID / GREEN button
7. SPIN button
8. START DELAY button
9. TEMPERATURE button
10. WASH CYCLE SELECTOR KNOB
1 2
4
56789
3
10
DISPLAY
ADDING GARMENTS
An icon on the display will signal when additional garments can be
introduced into the washing machine, without decreasing the washing
performance. To add garments, rst stop the washing machine by pressing
the START/PAUSE button then open the door and insert them.
Press the START/PAUSE button again to restart the wash cycle from
the point at which it was interrupted.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button, then select the desired cycle and press
the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.
AT THE END OF THE WASH CYCLE
This will be indicated by the word on the display; when the β€œ ”
symbol switches o, the door may be opened. Open the door, unload the
laundry and switch o the machine. If you do not press β€œON/OFF” button,
the washing machine will switch o automatically after about a 10 minutes.
OPTIONS
- If the selected option is not compatible with the set wash cycle, the
indicator light will ash accompanied by a buzzer and the option will
not be activated.
- If the selected option is not compatible with another previously
selected option, the indicator light will ash accompanied by a buzzer
and the option will not be activated.
Steam Hygiene
This option enhances washing performance by generating steam during
the wash cycle to remove any bacteria from the bres, which are treated
at the same time. Place the laundry in the drum, choose a compatible
programme and select option Steam Hygiene.
! The steam generated during the operation of the washing machine may
cause the porthole door to become hazy.
Final Care
The washing machine will perform gentle tumbling through slow
rotations of the drum. Final Care option starts after the cycle ends for a
maximum duration of 6h and you can interrupt at any time by pressing
any button on control panel or turning the knob.
Rapid / Green
After pushing the button for the 1st time, option Rapid is selected and the
cycle duration will be reduced.
Otherwise after pushing for the 2nd time, option Green is selected
allowing more energy saving.
Active Care
The detergent, premixed with water, creates an unique emulsion able
to better penetrate the bers of the garments, cleaning stains at even
low temperatures, preserving both colors and fabrics. These results are
obtained also due to the multiple dierent specic movements of the
drum which best take care of the garments.
Powder and liquid detergents are recommended for this option.
Start Delay
To set a delayed start for the selected cycle, press the corresponding
button repeatedly until the desired delay period is reached. When this
option has been activated, the symbol lights up on the display. To
remove the delayed start setting, press the button until β€œOFF” appears on
the display.
Temperature
Each wash cycle has a pre-dened temperature. To modify the temperature,
press the β€œTemp.” button. The value will appear on the display.
Spin
Each wash cycle has a pre-dened spin speed. To modify the spin speed,
press the β€œSpin Speed” button. The value will appear on the display.
DESCALE AND CLEAN PROCEDURE
An icon on the display will regularly (roughly every 50 cycles) remind users
that is time to run a maintenance cycle to clean the washing machine and
combat limescale build-up and bad odours.
To delete the descale alert turn the knob or push any button (including ON/
OFF button).
For optimal maintenance we suggest using WPRO Limescale and grease
remover, according to the instructions shown on the package.
The product can be purchased by contacting the technical assistance service
or through the website www.whirlpool.eu.
Whirlpool declines all liability for any damages to the appliance caused by the
use of other cleaning products for washing machines available on the market.
TIPS AND SUGGESTIONS
Divide the laundry according to:
Type of fabric (cotton, mixed bres, synthetics, wool, garments to be
hand-washed). Colour (separate coloured garments from whites, wash new
coloured garments separately). Delicates (small garments – such as nylon
stockings – and items with hooks – such as bras: insert them in a fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washing machine and
the drum. Check all buttons.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus detergent
in your laundry and it saves money by avoiding waste of surplus detergent
Use low temperature and longer duration
The most ecient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the
β€œPROGRAMME CHART” table to save water and energy.
Noise and remaining moisture content
They are influenced by the spinning speed: the higher the spinning speed in the
spinning phase, the higher the noise and the lower the remaining moisture content.
CARE AND MAINTENANCE
For any cleaning and maintenance, switch o and unplug the washing machine.
Do not use ammable uids to clean the washing machine.
Clean and maintain your washing machine periodically (at least 4 times per year).
Cutting o the water and electricity supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washing machine and help to prevent leaks.
Unplug the washing machine when cleaning it and during all
maintenance work.
Cleaning the washing machine
The outer parts and rubber components of the appliance can be cleaned using
a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Cleaning the detergent dispenser drawer
Remove the dispenser drawer by lifting and pulling it outwards. Wash it
under running water; this procedure should be eected regularly.
Caring for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant odours
from forming.
Cleaning the pump
The washing machine is tted with a self-cleaning pump that does not require
any maintenance. Small items (such as coins or buttons) may sometimes fall
into the protective pre-chamber situated at the base of the pump.
! Make sure that the wash cycle has ended and unplug the appliance.
To access the pre-chamber:
1. remove the covering panel on the front side of the machine by inserting
a screwdriver in the centre and sides of the panel and using it as a lever;
2. place a low and wide container under the water lter in order to collect
the residual water.
3. loosen the drainage pump cover by turning it anti-clockwise: it is
normal for some water to leak out;
4. clean the inside thoroughly;
5. screw the cover back on;
6. put the panel back in place, making sure the hooks slot in place before
pushing the panel onto the appliance.
Checking the water inlet hose
Check the water inlet hose at least once a year. If it is cracked or broken, it
must be replaced: during wash cycles, the high pressure of the water
could suddenly split the hose open.
! Never use hoses that have already been used.
ANTIMICROBIAL SEAL
The seal around the porthole door is made from a special mixture
ensuring antimicrobial protection, thus reducing bacterial proliferation
up to 99.99%.
The seal contains zinc pyrithione, a biocidal substance which reduces the
proliferation of harmful microbes (*) such as batteries and mould prone to
causing stains, unpleasant odours and product deterioration.
(*) According to tests performed by the University of Perugia, Italy
on: Staphylococcus aureus, Escherichia coll, Pseudomonas aeruginosa,
Candida albicans, Aspergillus niger, Penicillium digitatum
In rare cases an allergic reaction may be caused by prolonged contact between
seal and skin.
ACCESSORIES
Contact our Technical Assistance Service to check whether the following
accessories are available for this washing machine model.
Stacking kit
With this accessory you can secure the tumble dryer to the upper part of
your washing machine to save space and facilitate loading and unloading
of the tumble dryer.
TRANSPORT AND HANDLING
Do not lift the washing machine by gripping it from the upper section.
Unplug the appliance and close the water tap. Check that the door and
detergent dispenser drawer are tightly closed. Detach the lling hose
from the water tap then detach the drain hose. Empty all the water
remaining in the hoses and secure the latter so that they do not get
damaged during transport. Apply the transport bolts back on. Repeat, in
reverse order, the transport bolt removal procedure described in the
β€œInstallation instructions”.


Produktspezifikationen

Marke: Hotpoint
Kategorie: Waschmaschine
Modell: NM11 1046 WD A UK N

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotpoint NM11 1046 WD A UK N benΓΆtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Waschmaschine Hotpoint

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung fΓΌr -Kategorien-