Hotpoint HSZ12A2D Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hotpoint HSZ12A2D (10 Seiten) in der Kategorie Gefrierschrank. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/10
Instructions for use
3
ENGLISH Instructions for use Page 4
Always disconnect the appliance from the power supply before replacing the light bulb. Then follow
the instructions based on the type of light bulb for your product.
Replace the light bulb with one with the same features, available from the Technical Assistance Service
and authorised sellers.
Light type 1)
To remove the light bulb, unscrew it in an anti-clockwise direction, as
shown in the figure. Wait 5 minutes before reconnecting the appliance.
- traditional light bulb (max 25W)
or
- LED light bulb (with the same features)
only available from the Technical Assistance Service
Light type 2)
If the product has LED lights, as demonstrated in the figures below, contact the Technical Assistance
Service if you need a replacement.
LEDs last longer than traditional light bulbs, improve internal visibility and are environmentally-friendly.
4
Clean the appliance occasionally with a cloth and a solution of warm
water and neutral cleaning agents specifically for cleaning the inside
of the refrigerator. Do not use abrasive cleaning agents. To ensure
the constant and correct flow of the defrosting water, regularly clean
the inside of the drain situated in the back wall of the refrigerator
compartment near the fruit and vegetable drawer using the utensil
provided (see figure).
Before carrying out any maintenance or cleaning, take the plug out of the socket or disconnect the
appliance from the power supply.
Connect the appliance to the power supply.
In models with electronics, a sound signal may be emitted, which means that the temperature alarm
has been activated: press the sound alarm off button. Where provided, position the antibacterial anti-
odour filter in the fan as demonstrated in the filter packaging.
Note: After turning the appliance on, you must wait for 4-5 hours for the correct storage temperature
to be reached for a normally filled appliance.
USING FOR THE FIRST TIME
MAINTENANCE AND CLEANING
OF THE APPLICANCE
REPLACING THE LIGHT BULB OR LED
(depending on the model)
Light bulb
LED light bulb


Produktspezifikationen

Marke: Hotpoint
Kategorie: Gefrierschrank
Modell: HSZ12A2D

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotpoint HSZ12A2D benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Gefrierschrank Hotpoint

Bedienungsanleitung Gefrierschrank

Neueste Bedienungsanleitung für -Kategorien-