Hotpoint H0I D534A S Bedienungsanleitung


Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Hotpoint H0I D534A S (8 Seiten) in der Kategorie SpĆ¼lmaschine. Dieser Bedienungsanleitung war fĆ¼r 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
ENQuick Guide
1
THANK YOU FOR BUYING A HOTPOINT ARISTON PRODUCT.
In order to receive a more complete assistance, please register
your appliance on: www.hotpoint.eu/register
Before using the appliance carefully read Safety Instructions
guide.
PLEASE SCAN THE QR CODE ON YOUR
APPLIANCE IN ORDER TO HAVE MORE
DETAILED INFORMATION
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machineā€™s functional components.
ā€¢ It is mandatory that the salt reservoir never be empty.
ā€¢ It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
ī˜Ÿlled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Only the ī˜Ÿrst time you do this: ī˜Ÿll the salt reservoir
with water.
3. Position the funnel and ī˜Ÿll the salt reservoir (see ī˜Ÿgure)
right up to its edge (approximately 1 kg); it is not unu-
sual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water
softener beyond repair).
Whenever you need to add salt, it is mandatory to complete the proce-
dure before the beginning of the washing cycle to avoid corrosion.
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid
dispenser A should be ī˜Ÿlled when the RINSE AID
REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the
appliance tub.
A
C
D
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device C. Introduce the
detergent into the dry dispenser only. Place the amount of detergent for D
pre-washing directly inside the tub.
If all-in-one detergents are used, we recommend using the TABLET button,
because it adjusts the program so that the best washing and drying results
are always achieved.
Usage of detergent not designed for dishwashers may cause malfunc-
tion or damage to the appliance.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently pre-
venting scale buildup on heater, contributing also to better cleaning eī˜ž-
ciency. This system regenerates itself with salt, therefore it is required
to reī˜Ÿll salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per 6 Eco cycles with water hardness level set to 3.
Regeneration process starts in ī˜Ÿnal rinse and ī˜Ÿnishes in drying phase, be-
fore cycle ends.
ā€¢ Single regeneration consumes: ~3.5L of water;
ā€¢ Takes up to 5 additional minutes for the cycle;
ā€¢ Consumes below 0.005kWh of energy.
Program Programs description
Drying
phase
ActiveDry
Available
options *)
Duration
of wash
program
(h:min)**)
Water
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
1.
Eco 50Ā°- Eco program is suitable to clean normally soiled
tableware. that for this use. it is the most eī˜žcient program in
terms of its combined energy and water consumption. and that
it is used to assess compliance with the EU Ecodesign legislation. 3:10 9.5 0.85
2. Auto Intensive 65Ā° - Automatic program for heavily soiled
dishes and pans (not to be used for delicate items). 2:00 - 3:10 14.0 - 17.0 1.50 - 1.85
3. Auto Mixed 55Ā° - Automatic program for normally soiled pans
and dishes. 1:30 - 2:30 14.5 - 16.0 1.15 - 1.30
4.
Auto Fast Wash 50Ā° - Automatic program for limited quantity
of normally soiled crockery. Ensures optimal cleaning
performance in shorter time. - - 0:55 - 1:20 13.0 - 14.5 1.15 - 1.25
5. Rapid 30ā€™ 50Ā° - Program to be used for half load of lightly-soiled
dishes with no dried food residues. Does not have drying phase. -- 0:30 9.0 0.50
6.
Good Night 50Ā° - Suitable for night-time operation of the
appliance. Ensures optimal cleaning and drying performance
with the lowest noise emission. 3:30 15.0 1.15
7.
Sanitizing 65Ā° - Normally or heavily soiled crockery, with
additional antibacterial wash. Can be used to perform
maintenance of the dishwasher. - 1:40 10.0 1.30
8. Soak - Use to refresh crockery planned to be washed later.
No detergent to be used with this program. -- 0:12 4.5 0.01
9.
Self-Clean 65Ā° - Program to be used to perform maintenance
of the dishwasher, to be carried out only when the dishwash-
er is EMPTY using speciī˜Ÿc detergents designed for dishwash-
er maintenance.
-- 0:50 8.0 0.85
CONTROL PANEL
FIRST TIME USE
PROGRAMS TABLE
1. On-Oī˜/Reset button with indicator light
2. Program selection button
3. Salt reī˜Ÿll indicator light
4. Rinse Aid reī˜Ÿll indicator light
5. Program number and delay time indicator
6. Tablet (Tab) indicator light
7. Display
8. Zone Wash 3D indicator lights
9. Zone Wash 3D button
10. Delay button
11. START/Pause button with indicator light
/ Tablet (Tab)
1 2 3 4 5 6 7 8 9 10 11
2
Quick Guide
EN
TABLET (Tab) If you use powder or liquid detergent, this option -
should be oī˜ž.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED ī˜ashes rapidly 3 times and beeps will sound. The option will not be enabled.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration up to 20 min.
ZONE WASH 3D - Option works with one rack at once. In particular,
we recommend to use it with Mixed and Intensive cycles - thanks to
the additional 3D water jets placed on the bottom o the cavity, ZONE
WASH 3D option allows to save energy or to increase the washing
performance of the dishwasher.
LOADING THE RACKS CAPACITY: 14 standard place-settings
CLEANING AND MAINTENANCE More information in the Daily Reference Guide on website.
OPTIONS AND FUNCTIONS Please scan the on your product in order to have more detailed information. QR code
ActiveDry - is a convection drying system which automatically opens the
door during/after the drying phase to ensure exceptional drying perfor-
mance every day. The door opens at a temperature that is safe to your
kitchen furniture.
CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS
A
A
B
C
In case you ī˜Ÿnd foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
The lower spray arm may
be removed by pulling it
upwards.
DELAY - The start time of the program may be delayed for a period of
time between and hours.1 12
The DELAY function cannot be set once a program has been started.
ZONE WASH 3D
Zone Wash 3D uses addi-
tional water jets located
both: in the lower and
upper part of the di-
shwasher (marked with
orange color) to wash
more intensively heavily
soiled items by increa-
sing water coverage on
dishes.
LOWER RACK
For pots, lids, plates,
salad bowls, cutlery
etc. Large plates and
lids should ideally be
placed at the sides to
avoid interferences
with the spray arm.
The lower rack has
tip-up supports
which can be used
in a vertical position
when arranging pla-
tes or in a horizontal
position (lower) to
load pans and salad
bowls easily.
CUTLERY RACK
(loading example for the
cutlery rack)
The third rack was designed
to house the cutlery.
UPPER RACK
(loading example for the
upper rack)
Load delicate and light
dishes: glasses, cups,
saucers, low salad bowls.
FOLDABLE
FLAPS WITH
ADJUSTABLE
POSITION
(loading example for the
lower rack)
ENQuick Guide
3
In case your dishwasher doesnā€™t work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the speciī˜Ÿc Regulation requirements.
TROUBLESHOOTING
Please scan the on your product in order to have more detailed information.QR code
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
ā€¢ Using QR code on your product.
ā€¢ Visiting our website docs.hotpoint.eu and parts-selfservice.whirlpool.com
ā€¢ Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
When contacting our After-sales Service, please state the codes provided on your productā€˜s identiī˜Ÿcation plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model
identiī˜Ÿer that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
IEC 436
:
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The dishwasher does
not ī˜Ÿll the water.
Display shows: H,
6 and On/Oī˜ LED is
blinking rapidly
No water in the water supply or the tap is closed.
Make sure there is water in the water supply or the tap running.
The inlet hose is bent. Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dish-
washer and reboot.
The sieve in the water inlet hose is clogged; it is
necessary to clean it
After having carried out the veriī˜Ÿcation and cleaning, turn oī˜ and turn on
the dishwasher and restart a new program.
Dishwasher ī˜Ÿnishes
the cycle prematurely.
Display shows: and 15
On/Oī˜ LED is blinking
rapidly
Drain hose positioned too low or siphoning
into home sewage system.
Check if end of drain hose is placed at correct height (see INSTALLATION).
Check for siphoning into home sewage system, install air admittance valve if
necessary.
Air in water supply. Check water supply for leaks or other issues letting air inside.


Produktspezifikationen

Marke: Hotpoint
Kategorie: SpĆ¼lmaschine
Modell: H0I D534A S

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotpoint H0I D534A S benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung SpĆ¼lmaschine Hotpoint

Bedienungsanleitung SpĆ¼lmaschine

Neueste Bedienungsanleitung fĆ¼r -Kategorien-