Hotpoint FA2 540 H IX HA Bedienungsanleitung

Hotpoint Ofen FA2 540 H IX HA

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hotpoint FA2 540 H IX HA (40 Seiten) in der Kategorie Ofen. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40
EN
Quick guide
CONTROL PANEL DESCRIPTION
1. SELECTION KNOB
For switching the oven on by selecting
a function.
Turn to the position to switch the
oven off.
2. LIGHT
With the oven switched on, press to
turn the oven compartment lamp on or
off.
3. SETTING THE TIME
For accessing the cooking time settings,
delayed start and timer. For displaying
the time when the oven is off.
4. DISPLAY
5. ADJUSTMENT BUTTONS
For changing the cooking time settings.
6. THERMOSTAT KNOB
Turn to select the temperature you
require when activating manual
functions. For automatic functions use
0/A.
1 32 4 5 6
FIRST TIME USE
1. SETTING THE TIME
You will need to set the time when you switch on the
appliance for the first time: press icon and until the
the two digits for the hour start flashing on the display.
Use or to set the hour and press to confirm. The two
digits for the minutes will start flashing. Use or to set
the minutes and press to confirm.
Please note: When the icon is flashing, for example following
lengthy power outages, you will need to reset the time.
2. HEAT THE OVEN
A new oven may release odours that have been left behind
during manufacturing: this is completely normal.
Before starting to cook food, we therefore recommend
heating the oven with it empty in order to remove any
possible odours.
Remove any protective cardboard or transparent film from
the oven and remove any accessories from inside it.
Heat the oven to 250 ° C for about one hour. The oven must
be empty during this time.
Please note: It is advisable to air the room after using the appliance
for the first time.
FUNCTIONS & DAILY USE
CONVENTIONAL
For cooking any kind of dish on one shelf only.
CONVECTION BAKE
To cook on a maximum of two shelves at the same time.
It is a good idea to swap the position of the baking trays
halfway through cooking.
GRILL
For grilling steaks, kebabs and sausages, cooking
vegetables au gratin or toasting bread. When grilling meat,
we recommend using a drip tray to collect the cooking juices:
Position the tray on any of the levels below the wire shelf and
add 200 ml of drinking water.
TURBO GRILL
For roasting large joints of meat (legs, roast beef,
chicken). We recommend using a drip tray to collect the
cooking juices: position the pan on any of the levels below
the wire shelf and add 200 ml of drinking water.
ECO CONVECTION BAKE*
For cooking roasts and stuffed roasting joints on a
single shelf. Food is prevented from drying out excessively
by gentle, intermittent air circulation. When this ECO MODE
function is in use, the light will remain switched off during
cooking but can be switched on again by pressing .
BREAD AUTO
This function automatically selects the ideal
temperature and baking time for bread. For best results,
carefully follow the recipe. Activate the function when the
oven is cold.
DESSERTS AUTO
This function automatically selects the ideal
temperature and baking time for cakes. Activate the function
when the oven is cold.
THANK YOU FOR BUYING A HOTPOINT-
ARISTON PRODUCT
In order to receive a more complete
assistance, please register your product on
www . hotpoint . eu/register
Before using the appliance carefully read the Safety
Instruction.
DIAMOND CLEAN
The action of the steam released during this special
low-temperature cleaning cycle allows dirt and food residues
to be removed with ease. Pour 200 ml of drinking water on
the bottom of the oven and only activate the function when
the oven is cold.
* Function used as reference for the energy efficiency declaration in
accordance with Regulation (EU) No.65 / 2014
1. SELECT A FUNCTION
To select a function, turn the to the symbolselection knob
for the function you require: the display will light up and an
audible signal will sound.
2. ACTIVATE A FUNCTION
MANUAL
To start the function you have selected, turn the thermostat knob
to set the temperature you require.
Please note: During cooking you can change the function by
turning the or adjust the temperature by turning the selection knob
thermostat knob.
The function will not start if the thermostat knob is on 0 °C. You can
set the cooking time, cooking end time (only if you set a cooking
time) and a timer.
AUTOMATIC
To start the automatic function you have selected (“Bread
or “Dessert), keep the thermostat knob at the position for
automatic functions ( ).
To finish cooking, turn the to position 0.selection knob
Please note: You can set the cooking end time and timer.
3. PREHEATING AND RESIDUAL HEAT
Once the function starts, an audible signal and a flashing
icon on the display indicate that the preheating phase has
been activated.
At the end of this phase, an audible signal and the fixed icon
on the display will indicate that the oven has reached
the set temperature: at this point, place the food inside and
proceed with cooking.
Please note: Placing the food in the oven before preheating has
finished may have an adverse effect on the final cooking result.
After cooking and with the function deactivated, the icon
may continue to remain visible on the display even after the
cooling fan has switched off to indicate that there is residual
heat in the compartment.
Please note: The time after which the icon switches off varies
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product should be
considered to be off when the pointer on the selection knob is at
“0”.
4. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing until the icon and00:00 start flashing
on the display.
Use or to set the cooking time you require, then press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: an audible signal will sound and the
display will indicate that cooking is complete.
Notes: To cancel the cooking time you have set, keep pressing
until the icon starts flashing on the display, then use to reset
the cooking time to “00:00”.
This cooking time includes a preheating phase.
PROGRAMMING THE END COOKING TIME/DELAYED
START
After a cooking time has been set, starting the function can
be delayed by programming its end time: press until the
icon and the current time start flashing on the display.
Use or to set the time you want cooking to end and
press to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: the function will remain paused
until it starts automatically after the period of time that has
been calculated in order for cooking to finish at the time you
have set.
Please note: To cancel the setting, switch the oven off by turning
the selection knob to position “ ”.
Please note: Delay to start functionality is not available for Grill and
Turbo Grill functions.
END OOKING OF C
An audible signal will sound and the display will indicate
that the unction as inished. f h f
Turn the selection nob k to elect ifferent unction o s a d f or t
position to switch the oven off.
Please note: If the timer is active, the display will show “END”
alternately with the remaining time.
5. SETTING THE TIMER
This option does not interrupt or program cooking but
allows you to use the display as a timer, either during while a
function is active or when the oven is off.
Keep pressing until the icon and “00:00start flashing
on the display.
Use or to set the time you require and press to
confirm.
An audible signal will sound once the timer has finished
counting down the selected time.
Notes: To cancel the timer, keep pressing until the icon starts
flashing, then use to reset the time to “00:00”.
6. DIAMOND CLEAN FUNCTION
To activate the “Diamond Clean” cleaning function, pour 200
ml of drinking water into the bottom of the oven, then turn the
selection knob thermostat knob and the to the icon.
Please note: The position of the icon does not correspond to the
temperature reached during the cleaning cycle.
The function will activate automatically: the display shows
the time remaining to the end, alternating with DC.
Please note: It is only possible to programme the end time of this
function. The duration is automatically set to 35 minutes.
COOKING TABLE
RECIPE FUNCTION PREHEAT TEMPERATURE
(°C)
DURATION
(MIN)
LEVEL AND
ACCESSORIES
Leavened cakes
Yes 170 30 - 50 2
Yes 160 30 - 50 2
Yes 160 40 - 60*** 4 1
Biscuits/tartlets
Yes 160 25 - 35 3
Yes 160 25 - 35 3
Yes 160 20 - 35*** 4 2
Pizza / Focaccia
Yes 190 - 250 15 - 50 2
Yes 190 - 250 25 - 50*** 4 2
Lasagne / baked pasta / cannelloni /
flans Yes 190 - 200 45 - 65 2
Lamb / veal / beef /pork 1 kg 190 - 200 80 - 110Yes 3
Chicken/rabbit/duck 1 kg 200 - 230 50 - 100Yes 2
Baked fish/en papillote 0,5 kg
(fillets, whole) Yes 170 - 190 30 - 45 2
Toasted bread 5’ 250 2 - 6 5
Roast potatoes Yes 200 - 210 35 - 55 ** 3
ACCESSORIES
Wire shelf Baking dish or baking
tray on the wire shelf
Drip tray/baking tray
on the wire shelf Drip tray Drip tray with 200 ml
of water Baking tray
** Turn food two-thirds of the way through cooking (if necessary).
*** Switch levels half way through cooking.
The level is indicated on the wall of the cooking compartment.
The time indicated does not include the preheating phase:
we recommend placing the food in the oven and setting the
cooking time only after the required temperature has been
reached.
Download the Use and Care Guide from
docs . hotpoint . eu for the table of tested recipes, compiled
for the certification authorities in accordance with the
standards IEC and IEC 60350-1.


Produktspezifikationen

Marke: Hotpoint
Kategorie: Ofen
Modell: FA2 540 H IX HA

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotpoint FA2 540 H IX HA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ofen Hotpoint

Bedienungsanleitung Ofen

Neueste Bedienungsanleitung für -Kategorien-