Hotpoint BI WMWG 81484 UK Bedienungsanleitung

Hotpoint Waschmaschine BI WMWG 81484 UK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hotpoint BI WMWG 81484 UK (4 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
1 “ON/OFF button
2 Programme selector
3 “Start/Pause” button
4 “Spin button
5 “Intensive rinse button
6 “Clean+ button
7 “Start delay button
8 “FreshCare+” /
“Key lock“button
9 Temperature” button
DISPLAY INDICATORS
Pre-wash activated
Door locked
FreshCare+ activated
Start delay activated
Key lock activated
Washing phase
Indicates washing phase of the cycle
Failure: Call Service
Refer to Troubleshooting section
Failure: Waterlter clogged
Water cannot be drained; water lter
might be blocked
Failure: No water
No or not sucient inlet water.
In the event of any failure, refer to the
“TROUBLESHOOTINGsection
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your appliance on
www.whirlpool.eu/register
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bolts are removed. For more detailed
instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
PROGRAMME CHART
PRODUCT DESCRIPTION
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water lter
7. Adjustable feet (4)
DETERGENT DISPENSER
Compartment 1: Pre-wash detergent (powder)
Compartment 2: Washing detergent
(powder or liquid)
Compartment 3: Additives (fabric softeners,
etc.)
The fabric softener must not exceed the “MAX”
level.
! Use powder detergent for white cotton
garments, for pre-washing, and for washing at
temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
EN
Quick guide
+1 +2 +3 312
21 53
9
47
8
6
Max load 8 Kg
Power consumption in o -mode 0.5 W / in left-on mode 8 W Detergents and additives Recommended
detergent
Residual
dampness % (**)
Energy
consumption
kWh
Total water lt
Laundry
temperature °C
Programme
Temperatures Max. spin
speed
(rpm)
Max
load
(kg)
Duration
(h : m)
Pre-
wash
Main
wash Softener
Powder Liquid
Setting Range 1 2 3
Mixed 40°C - 40°C 8,0 *** 1000   – –
White 60°C - 90°C 8,01400 2:45 (90°) 49 0,9 90 55
Cotton 40°C - 60°C 8,01400 3:55 49 1,0 90 40
Eco 40-60 40 °C 40°C
1351 8,0 3:30 53 0,77 54 33
1351 4,0 2:45 53 0,65 52 36
1351 2,0 2:10 53 0,45 37 33
Sport 40°C - 40°C 4,0 *** 600   – –
Duvet 30°C - 30°C 3,5 *** 1000   – –
20°C 20 °C - 20 °C 1400 8,0 1:50   49 0,16 90 22
Spin & Drain 8,0 *** – – – 1400
Rinse & Spin 8,0 *** 1400 – –
Rapid 30’ 30°C - 30°C 4,5 0:30 1200(****)   71 0,2 45 27
Colours 1 15°C 15°C 4,5 *** 1000   – –
Wool 40°C - 40°C 2 *** 800   – –
Delicates 30°C - 30°C 1 *** 600(****)   – –
Synthetics 40°C - 60°C 41200 2:55 35 0,75 55 43
  Dosing required Dosing optional
1
2
3
1.
3.2.
5.
4.
6.
7.
** After programme end and spinning with maximum selectable spin speed, in default
programme setting.
*** The duration of the programme is shown on the display.
**** The display will show the suggested spin speed as default value.
6th Sense - the sensor technology adapts water, energy and programme duration to your wash load.
This data may dier in your home due to changing conditions in inlet water temperature,
water pressure etc. Approximate programme duration values refer to the default setting of
the programmes, without options.
The values given for programmes other than the Eco 40-60
programme are indicative only.
Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The most
efficient programme in terms of energy and water consumption for washing normally soiled cotton
laundry.
Note: spin speed values shown on the display can slightly differs from the values stated in the table.
For all Test Institutes
Long wash cycle for cottons: set wash cycle with a temperature of 40°C.Cotton
Synthetic program along: set wash cycle with a temperature of 4C.Synthetics
PROGRAMMES
For choosing the appropriate programme for your kind of
laundry, always respect the instructions on the care labels
of the laundry. The value given in the tub symbol is the
maximum temperature possible for washing the garment.
Mixed
For washing lightly to normally soiled resilient garments in cotton, linen,
synthetic bres and mixed bres.
White
For washing normally to heavily soiled towels, underwear, table and bed
linen, etc in resilient cotton and linen. Only when the temperature is
selected at 90°C the cycle is provided with a prewash phase before main
washing phase. In this case it is recommended to add detergent both, in
the prewash and main wash section.
Cotton
Normally to heavily soiled and robust cottons .
Eco 40-60
For washing normally soiled cotton garments declared to be washable
at 40 °C or 60 °C, together in the same cycle. This is the standard cotton
programme and the most ecient in terms of water and energy
consumption.
Sport
For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best
results, we recommend not exceeding the maximum load indicated in
the ‚‘‘PROGRAMME CHART‘. We recommend using liquid detergent , and
adding the amount suitable for half-load.
Duvet
Designed for washing eiderdown padded items such as double or single
duvets, cushions and anoraks. It is recommended to load such padded
items in the drum with the edges folded inwards and not to exceed ¾ of
the drums volume. For optimal washing, we recommend using a liquid
detergent.
20 °C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Spin & Drain
Spins the load then empties the water. For resilient garments. If you
exclude the spin cycle, the machine will drain only
Rinse & Spin
Rinses and then spins. For resilient garments.
Rapid 30’
For washing lightly soiled garments quickly. This cycle lasts only 30
minutes, saving time and energy.
Colours 15°
This cycle helps protect colours by washing in cold water (15°C) and uses
less energy to heat the water while still oering satisfactory wash results.
Suitable for lightly soiled, ustained garments. This cycle oers wash
results comparable to 40°c mixed at just 15°C
Wool
All wool garments can be washed using programme ‚“Wool“ even
those carryng the hand-wash only “ label. For best results, use special
detergents and do not exceed max kg declaration of laundry.
Delicates
For washing particularly delicate garments. Preferably turn garments
inside out before washing.
Synthetics
For washing soiled garments made from synthetic bres (such as
polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.
FIRST TIME USE
To remove any manufacturing debris select the “Cotton” programme
at a temperature of 60°C. Pour a small quantity of detergent powder into
the main wash compartment of the detergent dispenser (maximum 2
1/3 of the quantity the detergent manufacturer recommends for lightly
soiled laundry). Start the programme without adding any laundry.
DAILY USE
Prepare your laundry according to the recommendations in the “HINTS
AND TIPS” section. Load the laundry, close the door, open the water
tap and press the “ON/OFF” button to switch the washing machine
on, the “Start/Pause button ashes. Turn the programme selector
to the desired programme and select any option if needed. The
temperature and spin speed can be changed by pressing the Temp.
button or the “Spin Speed button. Pull out the detergent dispenser and
add the detergent (and additives/softener) now. Observe the dosing
recommendations on the detergent pack. Then close the detergent
dispenser.
STARTING CYCLE
Press the “Start/Pause button.
The machine will lock the door ( symbol on) and the drum will start to
rotate; the door will be unlocked ( symbol OFF) and then locked again (
symbol on) as preparation phase of each washing cycle. The “Clicking
noise is part of the door locking mechanism. Water will enter the drum
and start the washing phase once the door is locked.
PAUSE A RUNNING PROGRAMME
To pause the wash cycle, press the “Start/Pause ; the indicator light
will go o and the remaining time on display ash. To start the wash cycle
from the point at which it was interrupted press the button again.
OPEN THE DOOR, IF REQUIRED
After starting a programme, the “Door locked indicator lights up to
show that the door can not be opened. As long as a wash programme is
running, the door remains locked. To open the door while a programme
is in progress, press the “Start/Pause to pause the programme.
Provided the water level and/or temperature is/are not too high, the
“Door locked” indicator light goes o and you can open the door.
For example to add or remove laundry. Press the “Start/Pause button
again to continue the programme.
PROGRAMME END
The “Door locked” indicator light goes o and the display shows
End. To switch o the washing machine after programme ends press
the “ON/OFF” button, the lights goes o. If you do not press “ON/
OFF button, the washing machine will switch o automatically after
about a 10 minutes. Close the water tap, open the door and unload the
washing machine. Leave the door ajar to allow the drum to dry.
OPTIONS
! If the selected option is incompatible with the programme set,
the incompatibility will be signalled by a buzzer (3 beeps) and the
corresponding indicator light will ash.
! If the selected option is incompatible with another previously set
option, only the most recent selection will remain active.
Clean+
Clean+ is an option working on 3 dierent levels (Intensive, Daily
and Fast) that are specially designed to set the right washing action,
depending on your cleaning needs:
Intensive : this option is designed for high levels of dirtiness,
removing most stubborn stains.
Daily : this option is designed to remove everyday stains.
Fast : this option is designed to remove lightly soiled stains.
Intensive rinse
By selecting this option, the eciency of the rinse is increased and
optimal detergent removal is guaranteed. It is particularly useful for
sensitive skin. Press the button once, two or three times to select an
additional 1
+1
, 2
+2
or 3
+3
rinses after the standard cycle rinse and
remove all traces of detergent. Press the button again to go back to the
“Normal rinse” rinse type.
Start delay
To set the selected programme to start at a later time, press the button
to set the desired delay time. Symbol lights on the display when this
fuction is enabled. To cancel the delayed start, press the button again
until the value ‚‘‘0‘‘ is shown on the display.
FreshCare+
This option enhances washing performance by generating steam
to inhibit the proliferation of the main bad odour sources inside the
machine. After steam phase, the washing machine will perform gentle
tumbling through slow rotations of the drum. FreshCare+ option starts
after the cycle ends for a maximum duration of 6h and you can interrupt
at any time by pressing any button on control panel or turning the knob.
(*) Wait around 5’ before open the door.
Temperature
Every programme has a predened temperature. If you want to change
the temperature, press the Temp. button. The value appears on the
display.
Spin
Every programme has a predened spin speed. If you want to change
the spin speed, press the “Spin Speed button. The value appears on the
display.
Demo mode
To deactivate this function, switch the washing machine OFF. Than press
and hold “Start/Pause button, within 5 seconds press also
“ON/OFF button and hold both buttons for 2 seconds.
KEY LOCK
To lock the control panel, press and hold the “Key lock button for
approximately 3 seconds. The symbol will light up on the display
to indicate that the control panel has been locked (with the exception
of the “ON/OFF“ button). This prevents unintentional changes to
programmes, especially with children near the machine. To unlock the
control panel, press and hold the “Key lock” button for approximately
3 seconds .
BLEACHING
If you wish to bleach the laundry, load the washing machine and set the
“Rinse & Spin” programme .
Start the machine and wait for it to complete the rst water lling cycle
(roughly 2 minutes). Put the machine in pause mode by pressing the
“Start/Pause button, open the detergent drawer and pour the bleach
(observe the recommended doses indicated on the package) into the
main wash compartment where the partition was previously mounted.
Restart the cycle by pressing the “Start/Pause button.
If desired, it is possible to add fabric softener into the appropriate
compartment of the detergent drawer.
HINTS AND TIPS
Sort your laundry according to
Type of fabric/care label (cotton, mixed bres, synthetics, wool, handwash
items). Colour (separate coloured and white items, wash new coloured
items separately). Delicates (wash small items – like nylon stockings – and
items with hooks – like bras – in a cloth bag or pillow case with zip).
Empty all pockets
Objects like coins or lighters can damage your laundry as well as the
drum.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus
detergent in your laundry and it saves money by avoiding waste of
surplus detergent
Use low temperature and longer duration
The most ecient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the
“PROGRAMME CHART” table to save water and energy.
Noise and remaining moisture content
They are inuenced by the spinning speed: the higher the spinning
speed in the spinning phase, the higher the noise and the lower the
remaining moisture content.
CLEANING & MAINTENANCE
For any cleaning and maintenance, switch o and unplug the washing
machine. Do not use ammable uids to clean the washing machine.
Clean and maintain your washing machine periodically (at least 4 times
per year).
Cleaning the outside of the washing machine
Use a soft damp cloth to clean the outer parts of the washing machine.
Do not use glass or general purpose cleaners, scouring powder or similar
to clean the control panel – these substances might damage the printing.
Checking the water supply hose
Check the inlet hose regularly for brittleness and cracks. If damaged,
replace it by a new hose available through our After-Sales Service or your
specialist dealer.
Cleaning the water lter / draining residual water
Switch o and unplug the washing machine, take out the kitchen plinth
before cleaning the water lter or draining residual water.
The kitchen plinth must be mounted back all the time once the cleaning
operation is over.
If you used a hot wash programme, wait until the water has cooled down
before draining any water. Clean the water lter regularly, to avoid that the
water cannot drain after the wash due to obstruction of the lter. If the water
cannot drain, the display indicates that the waterlter may be clogged.
1 . Place a container close to the pump to collect any spillage.
2 . Remove, pulling it out, the emergency drain hose from the base
of the washing machine .
Remove the stopper of the emergency drain hose” at the end of the hose
and let the water ow into the container.
3 . Turn the exhaust lter handle and pull it out of the housing .
When the container of plinth is full with water, plug the stopper to the
hose end, and reinsert the small hose in the washing machines base .
After, empty the container .
Afterwards rmly close the emergency drain hose with the stopper .
4. Remove lter: Lay a cotton cloth beneath the water lter, which can
absorb a small amount of rest water . Then remove the water lter by
turning it out anticlockwise .
5 . Clean the water lter: remove residues in the lter and clean it under
running water .
6 . Insert the water lter: Reinsert the water lter again by turning it in
clockwise direction . Make sure to turn it in as far as it goes; the lter
handle must be in vertical position . To test water tightness of the water
lter, you can pour about 1 liter of water into the detergent dispenser .
1
2
Then reinstall the kitchen plinth.
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop.
Pull out the mains plug, and close the water tap. Make sure that door
and detergent dispenser are properly closed. Disconnect the inlet hose
from the water tap, and remove the drain hose from your draining point.
Remove all rest water from the hoses, and x them so that they cannot
get damaged during transport. Ret the transport bolts. Follow the
instructions for removing the transport bolts in the INSTALLATION GUIDE
in reverse order.
EN
Quick guide


Produktspezifikationen

Marke: Hotpoint
Kategorie: Waschmaschine
Modell: BI WMWG 81484 UK

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotpoint BI WMWG 81484 UK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Waschmaschine Hotpoint

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung für -Kategorien-