Hotpoint BI WMHG 91485 UK Bedienungsanleitung

Hotpoint Waschmaschine BI WMHG 91485 UK

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hotpoint BI WMHG 91485 UK (4 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
1 “ON/OFF button
2 Programme selector
3 “Start/Pause” button
4 “Spin Speed” button
5 “Multi Rinse” button
6 “Cleaning Action button
7 “Start Delay button
8 “Energy saver” / “Key lock“ button
9 Temperature” button
DISPLAY INDICATORS
Door locked
Energy saver activated
Pre-wash activated
Start Delay activated
Key lock activated
Washing phase
Indicates washing phase of the cycle
Failure: Call Service
Refer to Troubleshooting section
Failure: Water lter clogged
Water cannot be drained; water lter
might be blocked
Failure: No water
No or not sucient inlet water.
In the event of any failure, refer to the
“TROUBLESHOOTING section
THANK YOU FOR BUYING A HOTPOINT PRODUCT.
In order to receive a more complete assistance,
please register your appliance on
www.hotpoint.eu/register
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bolts are removed. For more detailed
instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
PROGRAMME CHART
EN
Quick guide
PRODUCT DESCRIPTION
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water lter
7. Adjustable feet (4)
DETERGENT DISPENSER
Compartment 1: Pre-wash detergent (powder)
Compartment 2: Washing detergent
(powder or liquid)
Compartment 3: Additives (fabric softeners, etc.)
The fabric softener must not exceed the MAX level.
! Use powder detergent for white cotton
garments, for pre-washing, and for washing at
temperatures over 60°C.
! Follow the instructions given on the
detergent packaging.
12
3
1.
3.2.
5.
4.
6.
7.
21 53
9
47
8
6
For all testing institutes:
2) Long cotton cycle: set cycle 7 at a temperature of 4C.
3) Long synthetics cycle: set cycle 8 at a temperature of 40°C.
* By selecting the cycle and excluding the spin cycle, the washing machine will drain only.
** The duration of the wash cycles can be checked on the display.
*** After programme end and spinning with maximum selectable spin speed, in default
programme setting.
**** The display will show the suggested spin speed as default value.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
The values given for programmes other than the Eco 40-60 programme are indicative only.
1) Eco 40-60 - Test wash cycle in compliance with EU Ecodesign regulation 2019/2014. The
most ecient programme in terms of energy and water consumption for washing normally
soiled cotton laundry.
Note: spin speed values shown on the display can slightly diers from the values stated
in the table.
Maximum load 9 kg
Power input in o mode 0.5 W / in left-on mode 8 W
Detergents and
Additives
Recommended
detergent
Residual
dampness % (***)
Energy c
onsumption kWh
Total water l
Laundry
temperature °C
Wash cycle
Temperature Maximum
spin
(r.p.m.)
Maximum
load (kg)
Duration
(h : m)
Pre-
wash Wash Fabric
softener Powder Liquid
Setting Range 1 2 3
1 Anti Stain 40 40 °C - 40 °C 1400 9,0 **   – –
2 Anti Stain Quick 40 °C - 40 °C 1200 4,5 **   – –
3 White 60 °C - 90 °C 1400 9,0 2:45 (90°) 49 0,9 90 55
4 Bed & Bath 60 °C - 60 °C 1400 9,0 **   – –
40 °C 40°C5Eco 40-60 (1)
1351 9,0 3:48 53 0,80 59 35
1351 4,5 2:54 53 0,59 57 34
1351 2,5 2:25 53 0,35 38 26
6 Mixed 40 °C - 40 °C 1000 9,0 **   – –
7 Cotton (2) 40 °C - 60 °C 1400 9,0 3:55   49 1,40 95 45
8 Synthetics (3) 40 °C - 60 °C 1200 4,0 2:55   35 0,80 55 43
9 Colours 40 °C - 40 °C 1400 9,0 **   – –
10 Rapid 30‘ 30 °C - 30 °C 1200 (****) 4,5 0:30   71 0,20 45 27
11 Wool 40 °C - 40 °C 800 2,0 **   – –
12 20°C 20 °C - 20 °C 1400 9,0 1:50   49 0,20 90 22
13 Delicates 30 °C - 30 °C 600 (****) 1,0 **   – –
14 Duvet 30 °C - 30 °C 1000 3,5 **   – –
Rinse & Spin 1400 9,0 ** – – – –
Spin & Drain * 1400 9,0 ** – –
  Required dosage Optional dosage
PROGRAMMES
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Anti Stain 40
This cycle is suitable to heavily-soiled garments with resistant colours.
It ensures a washing class that is higher than the standard class (A
class). When running the programme, do not mix garments of dierent
colours. We recommend the use of powder detergent. Pre-treatment
with special additives is recommended if there are obstinate stains
Anti Stain Quick
This cycle is ideal for washing daily stains in 45’. It is ideal for mixed
fabrics and coloured garments.
White
For washing normally to heavily soiled towels, underwear, table and
bed linen, etc in resilient cotton and linen. Only when the temperature
is selected at 90°C the cycle is provided with a prewash phase before
main washing phase. In this case it is recommended to add detergent
both, in the prewash and main wash section.
Bed & Bath
For washing home linen in a single cycle. It optimises the use of fabric
softener and allows for saving time and electricity. We recommend the
use of powder detergent.
Eco 40-60
For washing normally soiled cotton garments declared to be washable
at 40 °C or 60 °C, together in the same cycle. This is the standard cotton
programme and the most ecient in terms of water and energy
consumption.
! The cycle runs only at 40°C as per regulation.
Mixed
To wash mixed and coloured items together.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of
resistant linen and cotton that are moderately to heavily soiled.
Synthetics
Suitable for washing moderately soiled garments made of synthetic
bres (e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-
cotton bres.
Colours
For washing coloured cotton garments. This programme is optimised
to keep colours bright even after repeated washing.
Rapid 30
For washing lightly soiled garments in a short time. Not suitable for
wool, silk and garments to be washed by hand.
Wool - Wool Care
The wool wash cycle of this machine has been approved by The
Woolmark Company for the washing of machine washable wool
products provided that the products are washed according to the
instructions on the garment label and those issued by the
manufacturer of this washing machine. The Woolmark symbol is a
Certication mark in many countries. M2227
20 °C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Delicates
For washing very delicate garments. It is advisable to turn the garments
inside out before washing them. For best results, use liquid detergent
on delicate garments.
Duvet
Suitable for washing clothing padded with goose down, such as single
duvets (weighing under 3,5 kg), cushions or down jackets. Duvets
should be loaded into the drum with their edges folded inwards and
no more than ¾ of the total drum volume should be used up. For best
results, it is advisable to use liquid detergent to be poured into the
detergent drawer.
Rinse & Spin
Designed for rinsing and spinning.
Spin & Drain
Designed for spinning and draining the water.
FIRST TIME USE
To remove any manufacturing debris select the programme at a 3
temperature of 90°C. Pour a small quantity of detergent powder into the
main wash compartment of the detergent dispenser (maximum 1/3 of 2
the quantity the detergent manufacturer recommends for lightly soiled
laundry). Start the programme without adding any laundry.
DAILY USE
Prepare your laundry according to the recommendations in the “HINTS
AND TIPS section. Load the laundry, close the door, open the water
tap and press the “ON/OFF button to switch the washing machine
on, the “Start/Pause button ashes. Turn the programme selector
to the desired programme and select any option if needed. The
temperature and spin speed can be changed by pressing the Temp.
button or the “Spin Speed” button. Pull out the detergent dispenser and
add the detergent (and additives/softener) now. Observe the dosing
recommendations on the detergent pack. Then close the detergent
dispense.
STARTING CYCLE
Press the “Start/Pause button.
The machine will lock the door ( symbol on) and the drum will start to
rotate; the door will be unlocked ( symbol OFF) and then locked again
( symbol on) as preparation phase of each washing cycle. The “Clicking
noise is part of the door locking mechanism. Water will enter the drum
and start the washing phase once the door is locked.
PAUSE A RUNNING PROGRAMME
To pause the wash cycle, press the “Start/Pause ; the indicator light
will go o and the remaining time on display ash. To start the wash cycle
from the point at which it was interrupted press the button again.
OPEN THE DOOR, IF REQUIRED
After starting a programme, the “Door locked” indicator lights up to
show that the door can not be opened. As long as a wash programme is
running, the door remains locked. To open the door while a programme
is in progress, press the Start/Pause to pause the programme.
Provided the water level and/or temperature is/are not too high, the
“Door locked” indicator light goes o and you can open the door.
For example to add or remove laundry. Press the “Start/Pause button
again to continue the programme.
PROGRAMME END
The “Door locked” indicator light goes o and the display shows
“End”. To switch othe washing machine after programme ends press the
“ON/OFF” button, the lights goes o. If you do not press ON/OFF”
button, the washing machine will switch o automatically after about a
10 minutes. Close the water tap, open the door and unload the washing
machine. Leave the door ajar to allow the drum to dry.
OPTIONS
! If the selected option is incompatible with the programme set,
the incompatibility will be signalled by a buzzer (3 beeps) and the
corresponding indicator light will ash.
! If the selected option is incompatible with another previously set
option, only the most recent selection will remain active.
Energy saver
This option saves energy by not heating the water used to wash your
laundry – an advantage both to the environment and to your energy
bill. Instead, intensied wash action and water optimisation ensure
great wash results in the same average time of a standard cycle.
For the best washing results we recommend the usage of a liquid
detergent.
Start Delay
To set the selected programme to start at a later time, press the button
to set the desired delay time. Symbol lights on the display when this
function is enabled. To cancel the delayed start, press the button again
until the value ‘0‘‘ is shown on the display.
Cleaning Action
Option “Cleaning Action” makes it possible to optimise washing based
on the level of soil in the fabrics and on desired wash cycle intensity.
For heavily-soiled garments press “Cleaning Action button until the
level is reached. This level ensures a high-performance wash due
to a larger quantity of water used in the initial phase of the cycle and
due to increased drum rotation. It is useful when removing the most
stubborn stains. For lightly-soiled garments or a more delicate treatment
of the fabrics, press “Cleaning Action button until the level is
reached. The cycle will reduce drum rotation to ensure washing results
that are perfect for delicate garments.
Multi Rinse
By selecting this option, the eciency of the rinse is increased and
optimal detergent removal is guaranteed. It is particularly useful for
sensitive skin. Press the button once, two or three times to select an
additional 1 , 2 or 3 rinses after the standard cycle rinse and
remove all traces of detergent. Press the button again to go back to the
“Normal rinse” rinse type.
Temperature
Every programme has a predened temperature. If you want to change
the temperature, press the Temp. button. The value appears on the
display.
Spin Speed
Every programme has a predened spin speed. If you want to change
the spin speed, press the button. The value appears on the Spin Speed
display.
KEY LOCK
To lock the control panel, press and hold the “Energy saver” button for
approximately 3 seconds. The symbol will light up on the display
to indicate that the control panel has been locked (with the exception
of the “ON/OFF“ button). This prevents unintentional changes to
programmes, especially with children near the machine. To unlock the
control panel, press and hold the “Energy saver” button for approximately
3 seconds .
HINTS AND TIPS
Sort your laundry according to
Type of fabric/care label (cotton, mixed bres, synthetics, wool, handwash
items). Colour (separate coloured and white items, wash new coloured
items separately). Delicates (wash small items – like nylon stockings – and
items with hooks – like bras – in a cloth bag or pillow case with zip).
Empty all pockets
Objects like coins or lighters can damage your laundry as well as the drum.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus
detergent in your laundry and it saves money by avoiding waste of
surplus detergent
Use low temperature and longer duration
The most ecient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the
“PROGRAMME CHART table to save water and energy.
Noise and remaining moisture content
They are inuenced by the spinning speed: the higher the spinning
speed in the spinning phase, the higher the noise and the lower the
remaining moisture content.
CLEANING & MAINTENANCE
For any cleaning and maintenance, switch o and unplug the washing
machine. Do not useammable uids to clean the washing machine.
Clean and maintain your washing machine periodically (at least 4 times
per year).
Cleaning the outside of the washing machine
Use a soft damp cloth to clean the outer parts of the washing machine.
Do not use glass or general purpose cleaners, scouring powder or similar
to clean the control panel – these substances might damage the printing.
Checking the water supply hose
Check the inlet hose regularly for brittleness and cracks. If damaged,
replace it by a new hose available through our After-Sales Service or your
specialist dealer.
Cleaning the water lter / draining residual water
Switch o and unplug the washing machine, take out the kitchen plinth
before cleaning the water lter or draining residual water.
The kitchen plinth must be mounted back all the time once the cleaning
operation is over.
If you used a hot wash programme, wait until the water has cooled down
before draining any water. Clean the water lter regularly, to avoid that the
water cannot drain after the wash due to obstruction of the lter. If the water
cannot drain, the display indicates that the waterlter may be clogged.
1 . Place a container close to the pump to collect any spillage.
2 . Remove, pulling it out, the emergency drain hose” from the base
of the washing machine .
Remove the stopper of the emergency drain hose at the end of the hose
and let the water ow into the container.
3 . Turn the exhaust lter handle and pull it out of the housing .
When the container of plinth is full with water, plug the stopper to the
hose end, and reinsert the small hose in the washing machine’s base .
After, empty the container .
Afterwardsrmly close the emergency drain hose with the stopper .
4. Remove lter: Lay a cotton cloth beneath the water lter, which can
absorb a small amount of rest water . Then remove the water lter by
turning it out anticlockwise .
5 . Clean the water lter: remove residues in the lter and clean it under
running water .
6 . Insert the water lter: Reinsert the water lter again by turning it in
clockwise direction . Make sure to turn it in as far as it goes; the lter
handle must be in vertical position . To test water tightness of the water
lter, you can pour about 1 liter of water into the detergent dispenser .
1
2
Then reinstall the kitchen plinth.
TRANSPORT AND HANDLING
Never lift the washing machine by holding it at the worktop.
Pull out the mains plug, and close the water tap. Make sure that door
and detergent dispenser are properly closed. Disconnect the inlet hose
from the water tap, and remove the drain hose from your draining point.
Remove all rest water from the hoses, and x them so that they cannot
get damaged during transport. Ret the transport bolts. Follow the
instructions for removing the transport bolts in the Installation Guide in
reverse order.
EN
Quick guide


Produktspezifikationen

Marke: Hotpoint
Kategorie: Waschmaschine
Modell: BI WMHG 91485 UK

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hotpoint BI WMHG 91485 UK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Waschmaschine Hotpoint

Bedienungsanleitung Waschmaschine

Neueste Bedienungsanleitung für -Kategorien-