Hotpoint-Ariston ECOT6F 1291 (EU) Bedienungsanleitung

Hotpoint-Ariston Waschmaschine ECOT6F 1291 (EU)

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hotpoint-Ariston ECOT6F 1291 (EU) (60 Seiten) in der Kategorie Waschmaschine. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/60

Contents

Installation, 2-3

Unpacking and levelling

Connecting the electricity and water supplies

The first wash cycle

Technical data

Description of the washing machine

and starting a wash cycle, 4-5

Control panel

Indicator lights

How to open and shut the drum

Starting a wash cycle

Wash cycles, 6

Table of wash cycles

Personalisation, 7

Setting the temperature

Setting the spin speed

Functions

Detergents and laundry, 8

Detergent dispenser drawer

Bleach cycle

Preparing the laundry

Garments requiring special care

Load balancing system

Precautions and tips, 9

General safety

Disposal

Saving energy and respecting the environment

Care and maintenance, 10

Cutting off the water or electricity supply

Cleaning the washing machine

Caring for your appliance door and drum

Cleaning the pump

Checking the water inlet hose

How to clean the detergent dispenser

Troubleshooting, 11

Service, 12

ECOT6F 1291

Instructions for use

WASHING MACHINE

English,1

GB FES

Français,13 Español,25

Magyar, 37 Polski, 49

HU PL

Installation

! Keep this instruction manual in a safe place for future

reference. Should the appliance be sold, transferred or

moved, make sure the instruction manual accompanies

the washing machine to inform the new owner as to its

operation and features.

! Read these instructions carefully: they contain vital infor-

mation on installation, use and safety.

Unpacking and levelling

Unpacking

1. Unpack the washing

machine.

2. Check whether the

washing machine has

been damaged during

transport. If this is the

case, do not install it and

contact your retailer.

3. Remove the four

protective screws and

the rubber washer with

the respective spacer,

situated on the rear of the

appliance .(see figure)

4. Seal the gaps using the

plastic plugs provided.

5. Keep all the parts: you will need them again if the wa-

shing machine needs to be moved to another location.

Warning: should the screws be re-used, make sure you fasten

the shorter ones at the top.

! Packaging materials are not children’s toys.

Levelling

Your machine may make a considerable amount of noise if

the two front feet have not been adjusted correctly.

1. Install the washing machine on a flat sturdy floor, without

resting it up against walls, furniture cabinets or other.

2. If the floor is not perfectly

level, compensate for any

unevenness by tightening or

loosening the adjustable front

feet ; the angle of (see figure)

inclination, measured accor-

ding to the worktop, must not

exceed 2°.

Levelling your appliance

correctly will provide it with

stability and avoid any vi-

brations, noise and shifting

during operation. If it is placed on a fitted or loose carpet,

adjust the feet in such a way as to allow enough room for

ventilation beneath the washing machine.

Putting your appliance in place and moving it.

If your washing machine

is equipped with a special

set of retractable wheels

you can easy move it.

To lower the wheels and

thus move the appliance

effortlessly, just pull the

lever, situated on the left-

hand side beneath the

base. Once the appliance

is in the required position,

put the lever back in

place. The washing

machine is now firmly in place . (see figure)

Electric and water connections

Connecting the water inlet hose

1. Connect the supply pipe

by screwing it to a cold

water tab using a 3/4 gas

threaded connection (see

figure).

Before performing the con-

nection, allow the water to

run freely until it is perfectly

clear.

2. Connect the other end

of the water inlet hose

to the washing machine,

screwing it onto the ap-

pliance’s cold water inlet,

situated on the top right-

hand side on the rear of

the appliance .(see figure)

3. Make sure there are no

kinks or bends in the hose.

! The water pressure at the tap must be within the values

indicated in the Technical details table

(on the next page).

! If the water inlet hose is not long enough, contact a

specialist store or an authorised serviceman.

65 - 100 cm

Connecting the drain hose

Connect the drain hose,

without bending it, to a drai-

nage duct or a wall drain

located at a height between

65 and 100 cm from the

floor;

alternatively, rest it on

the side of a washbasin

or bathtub, fastening the

duct supplied to the tap

( ). The free end see figure

of the hose should not be

underwater.

! We advise against the use of hose extensions; if it is

absolutely necessary, the extension must have the same

diameter as the original hose and must not exceed 150 cm

in length.

Electrical connections

Before plugging the appliance into the electricity socket,

make sure that:

• thesocketisearthedandcomplieswithallapplicable

laws;

• thesocketisabletowithstandthemaximumpowerload

of the appliance as indicated in the Technical data table

(see opposite);

• thepowersupplyvoltagefallswithinthevaluesindicated

in the Technical data table (see opposite);

• thesocketiscompatiblewiththeplugofthewashing

machine. If this is not the case, replace the socket or the

plug.

! The washing machine must not be installed outdoors,

even in covered areas. It is extremely dangerous to leave

the appliance exposed to rain, storms and other weather

conditions.

! When the washing machine has been installed, the elec-

tricity socket must be within easy reach.

! Do not use extension cords or multiple sockets.

! The cable should not be bent or compressed.

! The power supply cable must only be replaced by autho-

rised technicians.

Warning! The company shall not be held responsible in the

event that these regulations are not respected.

The first wash cycle

Once the appliance has been installed, and before you use

it for the first time, run a wash cycle with detergent and no

laundry, using the wash cycle .2

Technical details

Model ECOT6F 1291

Dimensions

40 cm wide

85 cm high

60 cm deep

Capacity from 1 to 6 kg

Electric

connections

Please refer to the technical data plate

fixed to the machine.

Water

connections

maximum pressure 1 MPa (10 bar)

minimum pressure 0.05 MPa (0.5 bar)

drum capacity 42 litres

Spin speed up to 1200 rpm

Test wash

cycles in

accordance

with directives

1061/2010 and

1015/2010

programme 6; temperature 60°C and

40°C.

This appliance is compliant with

the following European Community

Directives:

- 2004/108/CE (Electromagnetic

Compatibility)

- 2006/95/CE (Low Voltage)

- 2002/96/CE

Produktspezifikationen

Marke:	Hotpoint-Ariston
Kategorie:	Waschmaschine
Modell:	ECOT6F 1291 (EU)
Display-Typ:	LED
Breite:	400 mm
Tiefe:	600 mm
Produktfarbe:	Weiß
Steuerung:	Tasten
Höhe:	850 mm
Eingebautes Display:	Ja
Geräteplatzierung:	Freistehend
Trockenprogramme:	Schnell
Waschprogramme:	Schnell
Maximale Schleuderdrehzahl:	1200 RPM
Nennkapazität (Waschen & Trocknen):	6 kg
Nennkapazität (Waschen):	- kg
Startzeitvorwahl:	Ja
Luftschallemmission (Waschen):	59 dB
Luftschallemmission (Trocknen):	72 dB
Energieeffizienzklasse (alt):	A+
Jährlicher Energieverbrauch Waschen:	164 kWh
Ladetyp:	Toplader
Wasserverbrauch pro Zyklus (Waschen & Trocknen):	- l
Energieverbrauch Reinigung:	0.665 kWh
Energieverbrauch Waschen und Trocknen:	- kWh
Türanschlag:	Hoch
Waschwirkungsklasse:	A
Schleuder-Klasse:	C
Rückstandsfeuchtigkeit:	53 %
Wasserkapazität:	kalt
Trommelvolumen:	42 l
Anzahl Trocknungsprogramme:	6
Jährlicher Wasserverbrauch (Waschen & Trocknen):	8250 l