Honeywell THP2400A1027W Bedienungsanleitung

Honeywell Thermostat THP2400A1027W

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell THP2400A1027W (12 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
INSTALLATION GUIDE
69-2762EFS-02
THP2400A1019
Cover Plate Assembly
APPLICATION
Use the THP2400A1019 cover plate assembly with the RedLINK™ VisionPRO ® or Wi-Fi VisionPRO® thermostats.
Use the THP2400A1019 cover plate assembly to cover marks on the wall or to mount the thermostat to a 2 in. x
4 in. electrical box.
The THP2400A1019 cover plate assembly contains one cover plate, one bracket, two #6-32 x 5/8 flat head
screws and two #6-32 x 1/4 pan head screws. See Fig. 1.
Fig. 1. THP2400A1019 cover plate assembly.
INSTALLATION
When Installing this Product…
1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous
condition.
2. Check ratings given in the instructions and on the product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service technician.
4. After installation is complete, check out product operation as provided in these instructions.
M34258
TWO #6-32 X 5/8 FLAT HEAD SCREWS
TWO #6-32 X 1/4 PAN HEAD SCREWS BRACKET
LEVEL LEVEL
25/32
(20)
6-5/32
(156)
1-1/2
(38)
5-3/4
(146)
THP2400A1019 COVER PLATE ASSEMBLY
69-2762EFS—02 2
CAUTION
Electrical Hazard.
Can cause electrical shock or equipment damage.
Disconnect power before beginning installation.
Mount Cover Plate
Mount Cover Plate Directly to Wall (See Fig. 2)
1. Pull the wires through the wire hole on the cover plate and wall plate.
2. Position the cover plate and wall plate on the wall with the arrows pointing up. Level the wall plate for
appearance only.
3. Use a pencil to mark the mounting holes for your thermostat.
4. Remove the cover plate and wall plate from the wall and drill two 3/16-in. holes in the wall (if drywall) as
marked. For firmer material such as plaster, drill two 7/32-in. holes. Tap the wall anchors (provided with
the thermostat) into the holes, until the anchor collar touches the wall.
5. Pull the wires through the wire hole on the cover plate and wall plate. Position the cover plate and wall
plate on the wall anchors.
6. Insert the mounting screws (provided with the thermostat) into the wall anchors. Check leveling, if desired,
and tighten the mounting screws.
Fig. 2. Mount cover plate, wall plate and thermostat directly to wall.
WALL OPENING
WALL ANCHORS (2)
(PROVIDED WITH
THERMOSTAT)
DRILLED HOLES (2)
WALL
MOUNTING SCREWS (2)
(PROVIDED WITH
THERMOSTAT)
M34259
WIRE
WIRE HOLE
COVER PLATE
MOUNTING HOLES (2)
THERMOSTAT
WIRE HOLE
WALL PLATE
MOUNTING HOLES (2)
THP2400A1019 COVER PLATE ASSEMBLY
3 69-2762EFS—02
Mount Cover Plate to a Vertical 2 in. X 4 in. Electrical Box (See Fig. 3)
1. Position the bracket on the electrical box. Insert two #6-32 X 5/8 flat head screws. Check leveling, if
desired, and tighten the flat head screws.
2. Pull the wires through the wire hole on the cover plate and wall plate. Position the cover plate and wall
plate on the bracket with the arrows pointing up.
3. Insert two #6-32 X 1/4 pan head screws and tighten.
Fig. 3. Mount bracket, cover plate, wall plate and thermostat to a vertical 2 in. X 4 in. electrical box.
#6-32 X 5/8 FLAT
HEAD SCREWS (2)
ELECTRICAL BOX
BRACKET
WIRE
WIRE HOLE
COVER PLATE
MOUNTING HOLES (2)
#6-32 X 1/4 PAN
HEAD SCREWS (2)
THERMOSTAT
WIRE HOLE
WALL PLATE
MOUNTING HOLES (2)
M34260


Produktspezifikationen

Marke: Honeywell
Kategorie: Thermostat
Modell: THP2400A1027W

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honeywell THP2400A1027W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Thermostat Honeywell

Bedienungsanleitung Thermostat

Neueste Bedienungsanleitung für -Kategorien-