Honeywell TH9320WF5003/U Bedienungsanleitung

Honeywell Thermostat TH9320WF5003/U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell TH9320WF5003/U (36 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/36
® U.S. Registered Trademark. Patents
pending. Copyright © 2019 Resideo.
All rights reserved.
69-2815EFS-07
Smart Thermostat 9000
Color Touchscreen
TH9320WF
Installation Guide
72º
SET TO
72
º
HOME FAN SYSTEM MENU
Fri, Jun 14, 2013
6:30 pm
INDOOR
45% Humidity
OUTDOOR
S USTAT
cool mode
80 /55% ËšHumidity
following schedule
Connected by
the TCC app
72
°
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (heat/cool).
MENU. Touch to display options. Start here
to set a program schedule.
Current schedule. Change temperature
setting and select temporary or permanent
hold.
Indoor conditions. Shows indoor
temperature and humidity.
Current date and time.
Current status. Shows system mode (heat/
cool).
Outdoor conditions. Outdoor temperature
and humidity appear after registration.
69-2815EFS—07 2
LEVEL
HERE
M34819
C
K
Rc
R
W-
O/B
Y
G
W2-
Aux/E
Y2
L
M34500A
Read and save these instructions
Wallplate installation
1. Separate wallplate from thermostat.
2. Mount wallplate as shown below.
Drill 3/16" holes for drywall. Drill 7/32" holes for plaster.
Wall anchors
Wallplate
Wire hole
Mounting screws
CAUTION: ELECTRICAL HAZARD
Can cause electrical shock or equipment damage. Disconnect power before
beginning installation.
MERCURY NOTICE
If this product is replacing a control that contains mercury in a sealed tube,
do not place the old control in the trash.
Wallplate
Back of
Thermostat
3 69-2815EFS—07
CCommon wire from secondary side of cooling transformer (if 2 transformers).
KOptional C-wire adaptor.
Rc Cooling power. Connect to secondary side of cooling system transformer.
RHeating power. Connect to secondary side of heating system transformer.
W-O/B 1st stage heat relay. Or changeover valve for heat pumps.
Y1st stage compressor contactor.
GFan relay.
W2-Aux/E 2nd stage heat relay. Or heat pump auxiliary/Emergency heat relay.
Y2 2nd stage compressor contactor.
LHeat pump system monitor.
Jumper Loop, a plug with a wire loop used to connect the to the terminals, R Rc
Leave jumper loop in place in single transformer systems. Remove (unplug)
jumper loop in two transformer systems.
Terminal Designations
Wiring
C
K
Rc
R
W-
O/B
Y
G
W2-
Aux/E
Y2
L
Remove
jumper loop
ONLY if you
have both
R and Rc
wires.
Terminal
release
Terminal
holes
accept one
wire


Produktspezifikationen

Marke: Honeywell
Kategorie: Thermostat
Modell: TH9320WF5003/U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honeywell TH9320WF5003/U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Thermostat Honeywell

Bedienungsanleitung Thermostat

Neueste Bedienungsanleitung für -Kategorien-