Honeywell Performance HB74 Bedienungsanleitung

Honeywell Sicherheitskamera Performance HB74

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Honeywell Performance HB74 (1 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war fĂĽr 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/1
www.honeywellvideo.com
+1.800.796.CCTV (North America only)
HVSsupport@honeywell.com
Document 800-11943 - Rev A - 05/2012
© 2012 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell.
The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting
from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to
incorporate such changes.
FCC Compliance Statement
Information to the user: This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
CAUTION Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Canadian Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.
WARNING This device is configured for 12 VDC operation only. Do NOT connect to higher
voltage. Use only with NRTL approved 12 VDC power supplies. To prevent potential ground
loop issues a separate PSU should be used for each camera. A multiple output PSU may be
used if the multiple output PSU has isolated and protected (2A MAX) outputs.
Warranty and Service
Subject to the terms and conditions listed on the Product warranty, during the warranty period
Honeywell will repair or replace, at its sole option, free of charge, any defective product returned
prepaid.
In the event you have a problem with any Honeywell product, please call Customer Service at
1.800.796.CCTV (North America only) for assistance or to request a Return Merchandise
Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available for the
technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to
Honeywell without a clearly identified Return Merchandise Authorization (RMA) number may
be refused.
Safety Instructions
BEFORE OPERATING OR INSTALLING THE UNIT, READ AND FOLLOW ALL INSTRUCTIONS.
AFTER INSTALLATION, retain the safety and operating instructions for future reference.
CAUTION The light emitted from the near-infrared light emitting diodes (LEDs) provides
illumination over a wide area. This light is not considered a risk to the unshielded human eye.
However, as with any light source, it is recommended that normal precautions be taken to avoid
unnecessary exposure. For example, avoid stairing into the beam or viewing directly with optical
instruments at close range.
NOTE IR LEDs could be warm after prolonged use.
This camera should be installed by qualified personnel only.
Please ensure that your installation area can safely support the weight of the camera.
Do not touch the camera lens, dome or bezel (front glass plate).
Do not drop the camera or subject it to physical shock.
Do not use a strong or abrasive detergent when cleaning the camera.
Do not disassemble the camera other than to make initial adjustments.
Please ensure that your installation area can support the weight of the camera.
Operating Conditions
Do not aim the camera towards an extreme light source to prevent damaging the CCD.
Only use the camera where temperatures are within the limits shown in the specifications
section. Be especially careful to provide ventilation when operating under high temperatures.
CAUTION THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF
ELECTRIC SHOCK IS PRESENT
WITHIN THE UNIT.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
THIS SYMBOL INDICATES THAT
IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS
ACCOMPANY THIS UNIT.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
Camera Dimensions
As surroundings darken, it
switches automatically from
color to black-and-white mode
to enhance sensitivity.
Key Features
1/3" Interline Transfer CCD
Discreet, bullet-style camera with 12 IR LEDs
Built in, fixed lens (f=3.8 mm)
Smart IR for even distribution of the IR
Standard resolution color: 420 TVL
Easy to install mounting bracket
Weatherproof housing with IP66 rating
Equalization valve
IR LED visible range of 45 ft. (15m),
depending on scene reflectance
12 VDC input
Package Includes
Performance Series
Standard Resolution IR Bullet Camera
HB74
Operating Guide
Specifications
Video Signal Specifications
Video Standard: NTSC
Scanning System: 525 lines/60 lines
Image Sensor: 1/3” High Sensitivy CCD
Number of Pixels (HxV): 510 x 492
Minimum Illumination 0 lux night, operates in complete darkness
Horizontal Resolution: 420 TVL
Video Output: 1.0 Vp-p, 75 Ohms
Sync System: 12 VDC: Internal
S/N Ratio: 50 dB or more (AGC off)
Automatic Electronic Shutter: 1/60-1/120,000 s
Lens Type (IR Corrected): Built in Fixed Lens (f=3.8 mm)
IR LEDs: 850 nm, 12 LEDs
IR Illumination Distance: 45 ft (13.7m)
White Balance: Auto
Electrical Specifications
Input Voltage: 12 VDC
Power Consumption: 3.6 W (max) / 300 mA with IR LEDs on
Mechanical Specifications
Dimensions: See Diagrams
Weight: 1.3 lb (0.6 kg)
Construction: Housing: Brushed and anodized aluminum with sunshield
Finish: Brushed and anodized aluminum
Connector: Main Video: BNC connector
Power Input: 12 VDC ± 10%
Environmental Specifications
Temperature: Operating: 14°F to 122°F (-10°C to 50°C)
Storage: -4°F to 140°F (-20°C to 60°C)
Relative Humidity: 0% to 95%, non-condensing
Rating: IP66
Accessories — Power Supply
HPT12DC500 12 VDC/500 mA Plug-in Regulated 2.1 mm
Coaxial Plug UL Listed/CSA Certified
Regulatory
Emissions: FCC, Part 15B, Class A
Immunity: EN 50130-4
Document 800-11943 - Rev A - 05/2012
Manual L-wrench
Sunshield
screw Mounting bracket
screws
One camera
4.84 (123.0 mm)”
2.58 (65.6 mm)”2.82 (71.6 mm)”
2.68 (68.0 mm)”
3.98 (101.3 mm)”
3.83 (97.3 mm)”
1.96 (50.0 mm)”

Produktspezifikationen

Marke: Honeywell
Kategorie: Sicherheitskamera
Modell: Performance HB74

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honeywell Performance HB74 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sicherheitskamera Honeywell

Honeywell

Honeywell Acuix HDVFNWBC Bedienungsanleitung

2 Mai 2024
Honeywell

Honeywell Acuix HDVFNWAC Bedienungsanleitung

27 März 2024
Honeywell

Honeywell HDZ30HD Bedienungsanleitung

24 März 2024
Honeywell

Honeywell HCCM474M Bedienungsanleitung

27 Februar 2024
Honeywell

Honeywell Equip HCD1F Bedienungsanleitung

15 Februar 2024
Honeywell

Honeywell HEN08122 Bedienungsanleitung

10 Februar 2024
Honeywell

Honeywell HRGX85 Bedienungsanleitung

29 Januar 2024
Honeywell

Honeywell Equip HDZ30 Bedienungsanleitung

29 Januar 2024
Honeywell

Honeywell HN30080208 Bedienungsanleitung

27 Januar 2024
Honeywell

Honeywell Acuix HDXANDASW Bedienungsanleitung

22 Januar 2024

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Speco Technologies

Speco Technologies O2PTZ34D5W Bedienungsanleitung

14 August 2024
ZKTeco

ZKTeco BL-34F26L Bedienungsanleitung

11 August 2024
Moxa

Moxa VPort 26 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 36 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L54160N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort P06 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPORT P06-1MP-M12-CAM80 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-DO-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 26A-1MP Bedienungsanleitung

27 Juni 2024