Honeywell HEV685B Bedienungsanleitung

Honeywell Luftbefeuchter HEV685B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell HEV685B (18 Seiten) in der Kategorie Luftbefeuchter. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/18

GETTING TO KNOW

YOUR COOL MOISTURE

EVAPORATIVE HUMIDIFIER

Invisible moisture

• Evaporative humidiﬁcation

means you will NOT see

the moisture output.

• With evaporative humidiﬁcation, a fan pulls

dry air from the room through the saturated

wicking ﬁlter. Moisture from the wicking ﬁlter

evaporates and is pushed into the room with

the help of the fan.

• Evaporative humidiﬁcation adjusts moisture

output to the amount of moisture the air can

hold. The drier (less humid) the air in the room, the more moisture the humidiﬁer will add to the

air. An evaporative humidiﬁer cannot add more moisture to the room than the air can hold. The

amount of moisture the air can hold depends on many factors including relative humidity level,

temperature and size of room.

Instruction Manual

HONEYWELL TOP FILL

COOL MOISTURE HUMIDIFIER

MODEL HEV685 SERIES

REPLACEMENT FILTER: HONEYWELL HC-14 SERIES FILTER E

Humidity Level

• The ideal indoor humidity level is 40-60%

• Use a Honeywell humidity monitor

(HHM10 or H10C) to check your indoor

humidity level (not included)

Filter

• A wicking ﬁlter is required for this unit to operate

(one included)

• The wicking ﬁlter will help to capture minerals

from your water and will help to prevent white dust

(calcium deposits from hard water)

• If you have hard water, you will need to replace your

ﬁlter more frequently

• See “Caring for your Filter” section for tips on

prolonging the life of your wicking ﬁlter

For questions and information about this humidiﬁer

Visit www.HoneywellPluggedIn.com or Call 1-800-477-0457

2 3

1. The humidifier should always be placed on a

firm, flat, waterproof surface at least four feet

(1.2 m) away from bedside, twelve inches

(30 cm) from the wall, and out of reach of

patients, children and pets.

2. Be sure the humidifier is in a stable position

and the power cord is away from heated

surfaces and out of the way to prevent the

humidifier from being tipped over.

3. Before using the humidifier extend the cord

and inspect for any signs of damage. DO NOT

use the unit if the cord has been damaged.

4. The humidifier has a polarized plug (one blade

is wider than the other) as a safety feature.

This plug will fit into a polarized outlet only one

way. If the plug does not fit fully into the outlet,

reverse the plug. If it still does not fit, contact

a qualified electrician. DO NOT attempt to

defeat this safety feature.

5. CAUTION: To avoid fire or shock hazard,

plug the humidifier directly into a 120V AC

electrical outlet. To avoid risk of fire, shock or

personal injury use an extension cordDO NOT

or power strip.

6. Shut off and unplug humidifier before moving.

The humidifier should always be unplugged and

emptied when not in operation or while being

cleaned. DO NOT move or tilt humidifier while it

is in operation. Plug and unplug humidifier with

dry hands. pull by cord.NEVER

7. When moving or lifting the full Water Tank,

use two hands; one hand on the Tank

Handle and the other on the bottom of

the Tank.

8. DO NOT add any medications, inhalants,

scented products or essential oils into Base,

Water Reservoir or Water Tank.

9. DO NOT cover or insert objects into any

openings on the humidifier.

10. DO NOT block intake or output vents.

11. DO NOT operate the humidifier without

water. Turn off and unplug unit when Tank

is empty.

12. Humidifier requires regular cleaning. Refer

to, and follow, cleaning instructions.

13. DO NOT operate outdoors; this appliance

is intended for indoor use.

14. DO NOT attempt to repair or adjust any

electrical or mechanical functions on this

humidifier. Doing so will void your warranty.

15. For residential use only.

SAVE THESE INSTRUCTIONS

SAFETY INSTRUCTIONS

READ AND SAVE THESE SAFETY INSTRUCTIONS

BEFORE USING THIS HUMIDIFIER

When using electrical appliances, basic precautions should always be followed to reduce

the risk of ﬁre, electrical shock and injury to persons, including the following:

GETTING TO KNOW YOUR HUMIDIFIER

Water

Tank

Plunger

Housing

Water

Reservoir Base

Motor

Housing

Power/Output

Knob

Humidity

Level Knob

Wicking

Filter

Plunger

Tank Cover

Tank Handle

Intake

Grill

Humidity

Reached

Indicator

Reﬁll

Indicator

Float Paddle

Auto Shut Off

Float

How It Works:

Water is released into the Reservoir when the Float Paddle engages the Plunger at the bottom

of the water tank. A Wicking Filter absorbs water from the Reservoir. A fan pulls dry air from

the room into the humidiﬁer where it passes through the saturated Wicking Filter. The ﬁlter

captures minerals and other impurities from the water, before the moisture is evaporated back

into the dry room with the help of the fan. The amount of moisture output depends on many

factors, including the current room humidity and temperature. As the humidity level in the

room increases, the moisture output decreases, which prevents over humidiﬁcation.

4 5

1. Remove Water Tanks and set aside. Remove Housing and lift up to expose Wicking Filter.

2. Carry Wicking Filter and Base to sink or tub.

3. Remove Filter from Base and run under cool water until saturated.

4. Carefully place wet Filter back in base; squeeze out excess water.DO NOT

1. Remove Water Tanks. Under each tank, identify the Brackets where the Float Paddle will be installed.

2. Place the Float Rod over both Brackets and press ﬁrmly until you hear it click into both Brackets.

3. Pull up gently on Float Rod to be sure it doesn’t pop out of either of the Brackets. Replace the Water Tank.

Repeat with second Tank and Float Paddle.

Step 3 Step 2

Step 4

Step 1

Step 2

FILLING/REFILLING WATER TANKS

1. Flip Tank Cover open.

2. Pour water into the Tank opening.

3. Close Tank Cover to keep objects and debris out of water.

Repeat to ﬁll second Water Tank.

Step 1 Step 3

The Tanks can be ﬁlled in two ways.

To ﬁll at the humidiﬁer:

Float Paddle Installation – required for humidiﬁer to operate

This humidiﬁer uses a ﬂoat system to regulate the water ﬂow from the Tank to the Reservoir. The Float

Paddles must be properly installed for the unit to operate. If not properly installed, water may not ﬂow into

the Reservoir or it may leak from the Base. The Float Paddle is designed to be easy to install and remove.

CAUTION: Improper placement of the Float Paddles could result in leaking or water not feeding

to the Reservoir.

Step 3 Step 2

Top Le Haut

“Click”

Step 1

Float

Rod

Float

Paddle

Brackets

Preparing the Wicking Filter

To speed the delivery of moisture into your room it is recommended to wet the wicking ﬁlter before use.

Step 2

Step 1

Step 4

Step 3

To ﬁll at the sink or tub:

1. Flip Tank Cover open. Grasp Tank Handle and lift Water Tank to remove from Base. Carry Tank to sink

or tub. use the Tank Cover to carry Water Tank. NOTE: DO NOT

2. Fill Tank with water. When ﬁlling, allow enough space at the top to minimize splashing when carrying.

Use cool tap water; use warm or hot water. DO NOT

3. Carry Water Tank back to humidiﬁer using two hands; one hand on Tank Handle at the top of the Tank

and other hand supporting the bottom of the Tank. Take care not to push the Plunger on the bottom of

the Water Tank or leaking may occur.

4. Place the Water Tank on the humidiﬁer Base. You may hear the water draining into the Reservoir.

Repeat to ﬁll the second Water Tank.

NOTE: If the wicking ﬁlter has dried out, it may take up to a minute for the humidiﬁer to turn back on while

the wick absorbs the water.

CAUTION: Use care when handling Water Tanks to avoid unnecessary impact. Banging

or dropping the Water Tanks could result in damage to the Tank that may

cause leaking.

1. Open box and locate locate the two (2)

Float Paddles and set aside. These must be

installed for the humidiﬁer to operate properly.

2. Place the humidiﬁer on a ﬁrm, level, water resistant

surface at least 12” (30 cm) from any walls.

DO NOT DO NOT block Intake Grill on base of unit.

place on surfaces that can be damaged by water.

Unpack the Humidiﬁer (Keep this instruction manual for reference.)

SETTING UP YOUR HUMIDIFIER

Step 1 Step 2

Float

Rod

Produktspezifikationen

Marke:	Honeywell
Kategorie:	Luftbefeuchter
Modell:	HEV685B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honeywell HEV685B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Luftbefeuchter Honeywell

Honeywell HUT-300 Bedienungsanleitung

27 August 2024

Honeywell HEV312 Bedienungsanleitung

27 August 2024

Honeywell QuietCare HCM-6011i Bedienungsanleitung

27 August 2024

Honeywell QuietCare HCM-6009 Bedienungsanleitung

27 August 2024

Honeywell MistMate HUL520 Bedienungsanleitung

27 August 2024

Honeywell H8908B Bedienungsanleitung

27 August 2024

Honeywell HUL570 Bedienungsanleitung

27 August 2024

Honeywell HCM-890 Bedienungsanleitung

27 August 2024

Honeywell HE240 Bedienungsanleitung

27 August 2024

Honeywell HE300A1005 Bedienungsanleitung

21 August 2024

Bedienungsanleitung Luftbefeuchter

Neueste Bedienungsanleitung für -Kategorien-

Scarlett SC-985 Bedienungsanleitung

15 Oktober 2024

Steba LB 7 Bedienungsanleitung

14 Oktober 2024

Vornado EVAP1 Bedienungsanleitung

13 Oktober 2024

Boneco U300 Bedienungsanleitung

10 Oktober 2024

Master DHA 250 Bedienungsanleitung

10 Oktober 2024

Philips HU1509 Bedienungsanleitung

8 Oktober 2024

Philips HU5710 Bedienungsanleitung

8 Oktober 2024

Adler AD 7951 Bedienungsanleitung

4 Oktober 2024

Panduit ACF10 Bedienungsanleitung

3 Oktober 2024

Panduit ACF11 Bedienungsanleitung

3 Oktober 2024