Honeywell CT230-GB/U Bedienungsanleitung

Honeywell Thermostat CT230-GB/U

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Honeywell CT230-GB/U (40 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war fĂĽr 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/40
INSTALLATION GUIDE
GUIDE D’INSTALLATION
GUÍA DE INSTALACIÓN
CT230-GA / CT230-GB
LINKED UNIT
UNITÉ ESCLAVE
UNIDAD ENLAZADA
33-00222EFS-04
Need Help?
We are here to help. Call 1-800-468-1502.
Besoin d’aide?
Nous sommes lĂ . Composez le 1 800 468-1502.
ÂżAsistencia?
Estamos aquĂ­ para ayudarlo. Llame al 1 800 468-1502.
CT230-GA / CT230-GB
1
ENGLISH
Read the entire document
CAUTION:
• Installation must be carried out by a certified electrician and must comply with national and
local electrical codes.
• Use the CT230 linked unit for resistive load only.
• Do NOT install the CT230 linked unit in an area where it can be exposed to water or rain.
• To prevent severe shock or electrocution, always turn the power OFF at the service panel
before working with wiring.
• Install the CT230 linked unit onto an electrical box.
• Connect the wires using solderless connectors for copper wires. Use special CO/ALR
solderless connectors for connection to aluminum wires.
• Keep the top and bottom air vents (openings) of the CT230 clean and unobstructed at all
times.
Before you start
Installation Guide
2
ENGLISH
The CT230 linked unit is designed to be used in a system for large floor heating applications whose
load is too high for a single conventional thermostat. The system consists of a master thermostat
and multiple CT230 linked units (see diagram on the following page). The heating area is divided
into zones of 15 A or less, each zone connected to a CT230 linked unit. The user sets the tempera-
ture and programs the heating schedule on the master thermostat.
• Each CT230 linked unit is powered by line voltage (120 VAC, 208 VAC or 240 VAC) and has its
own ground fault protection mechanism. Up to 10 CT230 linked units can be used in a given
setup.
• The master thermostat (not included) can be a TH114 or TH115 thermostat operating on
12 VDC. The master thermostat is powered by one of the CT230 linked units.
Supplied Parts
• One (1) CT230 linked unit
• Two (2) mounting screws
• Four (4) solderless connectors for copper wires
About the CT230 linked unit
CT230-GA / CT230-GB
3
ENGLISH
System diagram
Master
thermostat
CT230
Up to 10
zones
Sensor
cable
Heating
cables
(zone 1)
CT230 CT230
Heating
cables
(zone 2)
Heating
cables
(zone 3)


Produktspezifikationen

Marke: Honeywell
Kategorie: Thermostat
Modell: CT230-GB/U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honeywell CT230-GB/U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Thermostat Honeywell

Bedienungsanleitung Thermostat

Neueste Bedienungsanleitung fĂĽr -Kategorien-