Honeywell 2208 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honeywell 2208 (4 Seiten) in der Kategorie Gewölbe. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
Model 2208
DIGITAL STEEL FIRE & SECURITY SAFE
Read this manual carefully and never store it inside the safe!
Model 2208
Digital Steel Fire & Security Safe
PACKAGE CONTENTS
1 – Digital Steel Fire & Security Safe
1 – Operation Manual
4 – “AA” Batteries
2 – Entry Keys
1 – Emergency Access Key
1 – Silica Gel Pack
1 – Removable Drawer Tray
DO NOT RETURN SAFE TO STORE!
For missing parts or difficulty operating your
safe, please contact our Consumer
Assistance Department by telephone.
Store will not accept returned products
without prior authorization. You must first
contact our consumer assistance
department.
US/Canada 1-877-354-5457 (Toll Free)
Other Countries XX*-310-323-5722
XX*- Dial U.S. Country Code first
(Toll Charges Apply)
PRODUCT OVERVIEW
A - Safe Body
B - Safe Door
C - Entry Handle
D - Keyhole
E - Digital Keypad
F - Battery Cover
G - Door Hinges
H - Steel Casters
SETUP & OPERATION
STEP 1: INSTALL BATTERIES
For your convenience, we have included 4 “AA” Batteries that provide the
power for the electronic controls. These must be installed before using your
safe.
1 . The battery compartment is located
behind the dark gray panel under the
keypad. To gain access, slide the
panel to the left and lift off.
1.
2 . Install the 4 “AA” batteries in the
battery compartment as illustrated on
the inside of the compartment.
3 . Re-install battery compartment cover.
2.
REPLACING BATTERIES
NOTE: The pass code will not be erased if the batteries become weak or are removed.
Weak or dead batteries should be replaced immediately and all 4 batteries should be
changed. To replace the batteries please follow the instructions in STEP 2. in the
“SETUP” section. Remember to always remove batteries from safe if not using for an
extended period of time. If your batteries are completely dead and you cannot open
the safe by using the digital keypad, use the override access key to open safe and
access the battery compartment.
NOTE: It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries.
SETUP & OPERATION
STEP 2: UNLOCK AND OPEN THE SAFE
Your safe includes 2 Entry keys
and 1 Emergency Access key,.
1 . On the keypad, press
“ENTER” then “7 7 7 7” then
“ENTER” again. If the correct
code has been entered, a
musical code will chime and
the lock will click open.
1.
2 . Insert the “Entry Key” and
turn all the way to the right
(clockwise). Rotate the
handle upwards and pull the
door open.
2.
TO LOCK THE SAFE:
Carefully close the door and rotate the handle downwards. Now turn the
key all the way to the left and remove from the safe. The safe is now in
locked position. The Entry key and security code will be needed to open.
OVERRIDE ACCESS KEY
If you have forgotten your personal access code or the electronic lock is not
functioning properly, you can use the Emergency Override Key to gain access.
Insert the Emergency Access key
into the lock, turn all the way to
the left (counterclockwise), and lift
handle to open safe.
SETUP & OPERATION
STEP 3: PROGRAM NEW USER CODES
1 . With the door open, press the small black button located near the inside
center of the door.
2 . You will hear a musical chime and the small green LED will glow. NOTE: If
the green LED stops glowing, you need to press the black button and start
again.
3 . Using the digital keypad, you now have approximately 5 seconds to begin
entering a new personal code using a minimum of 4 digits to a maximum of
16 digits.
4 . Once you have entered new code, press ENTER key. You will hear a chime
indicating new code is now programmed into memory.
Before closing and locking the safe door, you should enter your new code to
confirm that it is correct and unlocks the safe.
For future reference, your new code should be recorded and placed in a secure
location away from the safe.
SECURITY FEATURES
SECURITY LOCKOUT PERIOD:
If an incorrect code is entered, the LED’s will blink and a special two-tone
alarm will sound. You should then re-enter the proper code. If an incorrect
code is entered 4 times, the safe will enter a security lockout period of about
5 minutes. During this time, you will not be able to enter the safe.
ORDERING NEW / REPLACEMENT KEYS
The following information is required to order keys:
1. PROOF OF OWNERSHIP (1 of 2 Options Below)
SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS ONLY!
• Copy of sales receipt showing Store, Date & Product Description.
• Copy of your picture I.D. (Drivers license, passport, regular I.D.).
PRODUCT OWNERSHIP VERIFICATION FORM
If sales receipt is not available, contact us by email or telephone to
request a “Product Ownership Verification Form”.
2. ORDER INFORMATION
CONTACT INFORMATION
• Name & Shipping Address
• E-mail address (If Available)
• Telephone Number
• Best Time to Contact You
PRODUCT INFORMATION
• Safe Model #
• Safe Serial #
• Lock Key #
• Quantity of Keys Ordered
3. PAYMENT INFORMATION *
AMOUNT DUE
• Per Key:
US/Canada - $12.00 (USD)
Australia - $15.00 (AUD)
Germany - €11.00 (EU)
• Express Delivery:
Contact us for Additional Charges
METHOD OF PAYMENT
• Telephone:
Visa or
MasterCard
• Mail:
Check or
Money Order
* Subject to change without prior notification.
LOCATING SAFE IDENTIFICATION NUMBERS
SERIAL NUMBER
Whenever contacting our Consumer
Assistance Department, you will need
to provide them with the serial number
of your safe. The serial number tag is
located either on the lower right front or
lower front right of the safe.
KEY NUMBER
4 Digit Number etched on the metal
collar located around the key hole.
Produktspezifikationen
| Marke: | Honeywell |
| Kategorie: | Gewölbe |
| Modell: | 2208 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Honeywell 2208 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gewölbe Honeywell
1 September 2024
1 September 2024
31 August 2024
31 August 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
28 August 2024
Bedienungsanleitung Gewölbe
- Gewölbe Hama
- Gewölbe Philips
- Gewölbe Guzzanti
- Gewölbe Thule
- Gewölbe Conrad
- Gewölbe FERM
- Gewölbe Topcraft
- Gewölbe Dometic
- Gewölbe Abus
- Gewölbe Olympia
- Gewölbe Yale
- Gewölbe Perel
- Gewölbe Workzone
- Gewölbe Westfalia
- Gewölbe Burg Wächter
- Gewölbe Filex
- Gewölbe First Alert
- Gewölbe Master Lock
- Gewölbe Phoenix
- Gewölbe Rottner
- Gewölbe Salvus
- Gewölbe SentrySafe
- Gewölbe Juwel
- Gewölbe Toolland
- Gewölbe Kidde
- Gewölbe Royal Sovereign
- Gewölbe SereneLife
- Gewölbe Sygonix
- Gewölbe Fluke
- Gewölbe VARO
- Gewölbe Duralock
- Gewölbe EasySafe
- Gewölbe Fichero
- Gewölbe FireKing
- Gewölbe Jewel
- Gewölbe Kreator-Varo
- Gewölbe M-Locks
- Gewölbe Nauta
- Gewölbe Oxloc
- Gewölbe Protector
- Gewölbe ROMA
- Gewölbe Sentry
- Gewölbe Sistec
- Gewölbe SMC
- Gewölbe Steren
- Gewölbe Technomax
- Gewölbe Avanti
- Gewölbe Olymp
- Gewölbe Challenge
- Gewölbe Suncast
- Gewölbe Kreator
- Gewölbe Barska
- Gewölbe NOFIRE
- Gewölbe Homak Security
- Gewölbe CAWI
- Gewölbe Rottner Tresor
- Gewölbe Winholt
- Gewölbe Stamony
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
5 Oktober 2024
5 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024