Honda Interstate VT1300CT (2013) Bedienungsanleitung

Honda Motor Interstate VT1300CT (2013)

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Honda Interstate VT1300CT (2013) (131 Seiten) in der Kategorie Motor. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/131

Contents

Motorcycle Safety P. 2

Operation Guide P. 16

Maintenance P. 35

Troubleshooting P. 79

Information P. 98

Specifications P. 122

Index P. 126

Welcome

Congratulations on your purchase of a new

Honda motorcycle. Your selection of a

Honda makes you part of a worldwide family

of satisfied customers who appreciate

Honda’s reputation for building quality into

every product.

To ensure your safety and riding pleasure:

●Read this owner’s manual carefully.

●Follow all recommendations and

procedures contained in this manual.

●Pay close attention to safety messages

contained in this manual and on the

motorcycle.

To protect your investment, we urge you to

take responsibility for keeping your

motorcycle well serviced and maintained.

Also, observe the break-in guidelines, and

always perform the pre-ride inspection and

other periodic checks in this manual.

When service is required, remember that

your Honda dealer knows your motorcycle

best. If you have the required mechanical

“know-how” and tools, you can purchase an

official Honda Service Manual to help you

perform many maintenance and repair tasks.

2P. 116

Read the warranty information thoroughly so

that you understand the warranty coverage

and that you are aware of your rights and

responsibilities. 2P. 117

You may also want to visit our website at

www.powersports.honda.com.

www.honda.ca.

Happy riding!

California Proposition 65 Warning

WARNING: This product contains or emits

chemicals known to the State of California to

cause cancer and birth defects or other

reproductive harm.

Canada

A Few Words About Safety

Your safety, and the safety of others, is very

important. Operating this motorcycle safely is

an important responsibility.

To help you make informed decisions about

safety, we have provided operating

procedures and other information on safety

labels and in this manual. This information

alerts you to potential hazards that could

hurt you or others.

Of course, it is not practical or possible to

warn you about all hazards associated with

operating or maintaining a motorcycle. You

must use your own good judgement.

You will find important safety information in

a variety of forms, including:

●Safety labels on the motorcycle

●Safety Messages preceded by a safety alert

symbol and one of three signal words:

DANGER, WARNING, or CAUTION.

These signal words mean:

DANGER

You WILL be KILLED or SERIOUSLY

HURT if you don’t follow instructions.

WARNING

You CAN be KILLED or SERIOUSLY

HURT if you don’t follow instructions.

CAUTION

You CAN be HURT if you don’t follow

instructions.

Other important information is

provided under the following titles:

NOTICE

Information to help you avoid

damage to your motorcycle,

other property, or the

environment.

Motorcycle Safety

This section contains important information for safe riding of your motorcycle.

Please read this section carefully.

Safety Guidelines .........................................P. 3

Safety Labels ................................................P. 7

Safety Precautions .......................................P. 9

Riding Precautions .....................................P. 10

Accessories & Modifications......................P. 14

Loading .......................................................P. 15

Safety Guidelines

continued

Motorcycle Safety

Safety Guidelines

Follow these guidelines to enhance your safety:

●Perform all routine and regular inspections

specified in this manual.

●Stop the engine and keep sparks and flame

away before filling the fuel tank.

●Do not run the engine in enclosed or partly

enclosed areas. Carbon monoxide in exhaust

gases is toxic and can kill you.

It’s a proven fact: helmets and protective

apparel significantly reduce the number and

severity of head and other injuries. So always

wear an approved motorcycle helmet and

protective apparel. 2P. 9

Make sure that you are physically fit, mentally

focused and free of alcohol and drugs. Check

that you and your passenger are both wearing

an approved motorcycle helmet and protective

apparel. Instruct your passenger on holding

onto the seat strap or your waist, leaning with

you in turns, and keeping their feet on the

footpegs, even when the motorcycle is stopped.

Even if you have ridden other motorcycles,

practice riding in a safe area to become familiar

with how this motorcycle works and handles,

and to become accustomed to the motorcycle’s

size and weight.

Always Wear a Helmet

Before Riding

Take Time to Learn & Practice

Safety Guidelines

Motorcycle Safety

We recommend that all riders take a certified

course approved by the Motorcycle Safety

Foundation (MSF). New riders should start with

the basic course, and even experienced riders

will find the advanced course beneficial.

For information about the MSF training course

nearest you, call the national toll-free number:

(800) 446-9227.

Other riding tips can be found in the You

and Your Motorcycle Riding Tips booklet that

came with your motorcycle.

Always pay attention to other vehicles around

you, and do not assume that other drivers see

you. Be prepared to stop quickly or perform an

evasive maneuver.

Make yourself more visible, especially at night,

by wearing bright reflective clothing,

positioning yourself so other drivers can see

you, signaling before turning or changing lanes,

and using your horn when necessary.

Never ride beyond your personal abilities or

faster than conditions warrant. Fatigue and

inattention can impair your ability to use good

judgement and ride safely.

Alcohol and riding don’t mix. Even one

alcoholic drink can reduce your ability to

respond to changing conditions, and your

reaction time gets worse with every additional

drink. Don’t drink and ride, and don’t let your

friends drink and ride either.

Ride Defensively

USA

Make Yourself Easy to See

Ride within Your Limits

Don’t Drink and Ride

Safety Guidelines

continued

Motorcycle Safety

It’s important to keep your motorcycle properly

maintained and in safe riding condition.

Inspect your motorcycle before every ride and

perform all recommended maintenance. Never

exceed load limits (2P. 15), and do not modify

your motorcycle or install accessories that

would make your motorcycle unsafe (2P. 14).

Personal safety is your first priority. If you or

anyone else has been injured, take time to

assess the severity of the injuries and whether it

is safe to continue riding. Call for emergency

assistance if needed. Also follow applicable

laws and regulations if another person or

vehicle is involved in the crash.

If you decide to continue riding, first evaluate

the condition of your motorcycle. If the engine

is still running, turn it off. Inspect for fluid leaks,

check the tightness of critical nuts and bolts,

and check the handlebar, control levers, brakes,

and wheels. Ride slowly and cautiously.

Your motorcycle may have suffered damage

that is not immediately apparent. Have your

motorcycle thoroughly checked at a qualified

service facility as soon as possible.

Keep Your Honda in Safe Condition

If You are Involved in a Crash

Safety Guidelines

Motorcycle Safety

Exhaust contains poisonous carbon monoxide,

a colorless, odorless gas. Breathing carbon

monoxide can cause loss of consciousness and

may lead to death.

If you run the engine in a confined or even

partly enclosed area, the air you breathe could

contain a dangerous amount of carbon

monoxide. Never run your motorcycle inside a

garage or other enclosure.

Carbon Monoxide Hazard

WARNING

Carbon monoxide gas is toxic.

Breathing it can cause

unconsciousness and even kill you.

Avoid any areas or activities that

expose you to carbon monoxide.

Safety Labels

Motorcycle Safety

Safety Labels

Safety and information labels on your

motorcycle provide important safety

information and may warn you of potential

hazards that could cause serious injury. Read

these labels carefully and don’t remove them.

If a label comes off or becomes hard to read,

contact your dealer for a replacement.

Safety Labels

Motorcycle Safety

VT1300CR/CRA VT1300CT/CTA

Safety Precautions

continued

Motorcycle Safety

Safety Precautions

●Ride cautiously and keep your hands on the

handlebars and feet on the footpegs.

●Keep passenger’s hands on to the seat strap

or your waist, passenger’s feet on the

footpegs while riding.

●Always consider the safety of your passenger,

as well as other drivers and riders.

Make sure that you and any passenger are

wearing an approved motorcycle helmet, eye

protection, and high-visibility protective

clothing. Ride defensively in response to

weather and road conditions.

❙

Helmet

Should be safety-standard certified, high-

visibility, and correct size for your head

●Must fit comfortably but securely, with the

chin strap fastened

●Face shield with unobstructed field of vision

or other approved eye protection

Look for a DOT (Department of

Transportation) certification label on any helmet

you buy.

❙

Gloves

Full-finger leather gloves with high abrasion

resistance

Protective Apparel

WARNING

Not wearing a helmet increases the

chance of serious injury or death in a

crash.

Make sure that you and any passenger

always wear an approved helmet and

protective apparel.

USA

Riding Precautions

Motorcycle Safety

❙

Boots or Riding Shoes

Sturdy boots with non-slip soles and ankle

protection

❙

Jacket and Pants

Protective, highly visible, long-sleeved jacket

and durable long pants for riding (or a

protective suit).

Riding Precautions

During the first 300 miles (500 km) of running,

follow these guidelines to ensure your

motorcycle’s future reliability and performance.

●Avoid full-throttle starts and rapid

acceleration.

●Avoid hard braking.

●Ride conservatively.

Observe the following guidelines:

●Avoid excessively hard braking and sudden

shifting to a lower gear.

uSudden braking can reduce the

motorcycle’s stability.

uWhere possible, reduce speed before

turning; otherwise you risk wheel slippage.

Break-in Period

Brakes

Riding Precautions

continued

Motorcycle Safety

●Exercise caution on low traction surfaces.

uThe tires slip more easily on such surfaces

and braking distances are longer.

●Avoid continuous braking.

uRepeated braking, such as when

descending long, steep slopes can

seriously overheat the brakes, reducing

their effectiveness. Use engine braking

with intermittent use of the brakes to

reduce speed.

●For full braking effectiveness, operate both

the front and rear brakes together.

❙

Combined ABS (VT1300CRA/CTA only)

Your motorcycle’s rear brake system is linked to

the front brake. This means that operating the

rear brake pedal applies the rear brake and a

portion of the front brake. Operating the front

brake lever applies only the front brake.

For full braking effectiveness, operate both the

lever and pedal together.

Riding Precautions

Motorcycle Safety

This model is also equipped with an Anti-lock

Brake System (ABS) designed to help prevent

the brakes from locking up during hard braking.

●ABS does not reduce braking distance. In

certain circumstances, ABS may actually

result in a longer stopping distance.

●ABS does not function at speeds below 6

mph (10 km/h).

●The brake lever and pedal may recoil slightly

when applying the brakes. This is normal.

●Always use the recommended tires to ensure

correct ABS operation.

❙

Engine Braking

Engine braking helps slow your motorcycle

down when you release the throttle. For further

slowing action, downshift to a lower gear. Use

engine braking with intermittent use of the

brakes to reduce speed when descending long,

steep slopes.

❙

Wet or Rainy Conditions

Road surfaces are slippery when wet, and wet

brakes further reduce braking efficiency.

Exercise extra caution when braking in wet

conditions.

If the brakes get wet, apply the brakes while

riding at low speed to help them dry.

●Park on a firm, level paved surface.

●If you must park on a slight incline or loose

surface, park so that the motorcycle cannot

move or fall over.

●Make sure that high-temperature parts

cannot come into contact with flammable

materials.

●Do not touch the engine, muffler, brakes and

other high-temperature parts until they cool

down.

Parking

Riding Precautions

Motorcycle Safety

●To reduce the likelihood of theft, always lock

the handlebar and remove the key when

leaving the motorcycle unattended.

Use of an anti-theft device is also

recommended.

❙

Parking with the Side Stand

Stop the engine and remove the ignition key.

Push the side stand down.

Slowly lean the motorcycle to the left until its

weight rests on the side stand.

Turn the handlebar fully to the left.

uTurning the handlebar to the right reduces

stability and may cause the motorcycle to

fall.

Lock the steering lock. 2P. 26

Follow these guidelines to protect the engine

and catalytic converter:

●Use only unleaded gasoline.

●Use recommended octane number. Using

lower octane gasoline will result in decreased

engine performance.

●Do not use fuels containing a high

concentration of alcohol. 2P. 115

●Do not use stale or contaminated gasoline or

an oil/gasoline mixture.

●Avoid getting dirt or water in the fuel tank.

Refueling and Fuel Guidelines

Accessories & Modifications

Motorcycle Safety

Accessories &

Modifications

We strongly advise that you do not add any

accessories that were not specifically designed

or approved for your motorcycle by Honda or

make modifications to your motorcycle from its

original design. Doing so can make it unsafe.

Modifying your motorcycle may also void your

warranty and make your motorcycle illegal to

operate on public roads and highways. Before

deciding to install accessories on your

motorcycle be certain the modification is safe

and legal.

Do not pull a trailer with, or attach a sidecar to,

your motorcycle. Your motorcycle was not

designed for these attachments, and their use

can seriously impair your motorcycle’s handling.

WARNING

Improper accessories or modifications

can cause a crash in which you can be

seriously hurt or killed.

Follow all instructions in this owner’s

manual regarding accessories and

modifications.

Motorcycle Safety

●Carrying extra weight affects your

motorcycle’s handling, braking and stability.

Always ride at a safe speed for the load you

are carrying.

●Avoid carrying an excessive load and keep

within specified load limits.

2Maximum weight capacity / Maximum

luggage weight P. 122

●Tie all luggage securely, evenly balanced and

close to the center of the motorcycle.

●Do not place objects near the lights or the

muffler.

WARNING

Overloading or improper loading can

cause a crash and you can be seriously

hurt or killed.

Follow all load limits and other

loading guidelines in this manual.

Operation Guide

Parts Location

Front brake fluid reservoir (P71)

Air cleaner (P58)

Engine oil filter (P65)

Engine oil drain bolts (P65)

Crankcase breather tube

(P59)

Spark plugs (P60)

(VT1300CR/CRA)

Rear suspension rebound damping adjuster (P77)

Fuse box (P96)

Throttle grip (P57)

Rear brake fluid reservoir (P71)

continued

Operation Guide

(VT1300CR/CRA)

Ignition switch

(P26)

Spark plug (P60)

Clutch lever (P73)

Fuel fill cap (P30)

Engine oil fill cap/dipstick (P63)

Seat (P54)

Spark plug (P60)

Battery (P56)

Final drive gear oil fill cap (P69)

Final drive gear oil drain bolt (P70)

Coolant reserve tank (P67)

Shift lever (P29)

Side stand (P76)

Main fuse (P97)

Parts Location (Continued)

Operation Guide

(VT1300CT/CTA)

Rear suspension rebound damping adjuster (P77)

Saddlebag (P34)

Fuse box (P96)

Front brake fluid reservoir (P71)

Throttle grip (P57)

Spark plugs (P60)

Air cleaner (P58)

Crankcase breather tube

(P59)

Rear brake fluid reservoir (P71)

Engine oil drain bolts (P65)

Engine oil filter (P65)

Operation Guide

(VT1300CT/CTA)

Spark plug (P60)

Ignition switch (P26)

Clutch lever (P73)

Fuel fill cap (P30)

Shift lever (P29)

Engine oil fill cap/dipstick (P63)

Spark plug (P60)

Seat (P54)

Battery (P56)

Final drive gear oil fill cap (P69)

Final drive gear oil drain bolt (P70)

Coolant reserve tank (P67)

Side stand (P76)

Saddlebag (P34)

Main fuse (P97)

Operation Guide

Instruments

Select/Reset button

USA: Odometer & tripmeter read in miles.

Canada: Odometer & tripmeter read in

kilometers.

Odometer [Odo], Tripmeter [Trip A/B] &

Clock (12-hour display)

Select/Reset button switches between

odometer, tripmeters & clock.

• Odometer: Total distance ridden.

• Tripmeter: Distance ridden since tripmeter

was reset (press and hold select/reset

button to reset to 0.0 mile/km).

Speedometer

Operation Guide

To set the clock:

!aTurn the ignition switch on.

!bSelect the clock.

!cPress and hold the select/reset button until

the hour digits start flashing.

!dPress the select/reset button until the

desired hour is displayed.

!ePress and hold the select/reset button. The

minute digits start flashing.

!fPress the select/reset button until the

desired minute is displayed.

!gPress and hold the select/reset button until

the display stop flashing. The clock is set.

uThe time can also be set by turning the

ignition switch off.

uThe display will stop flashing

automatically and the adjustment will be

cancelled if the button is not pressed for

about 30 seconds.

Operation Guide

Indicators

Low oil pressure indicator

Comes on when the ignition switch is turned on.

Goes off when the engine starts.

If it comes on while engine is running: (P82)

ABS (Anti-lock Brake System) indicator

(VT1300CRA/CTA)

Comes on when the ignition switch is turned on. Goes off

when your speed reaches approximately 6 mph (10 km/h).

If it comes on while riding: (P83)

High coolant temperature indicator

If it comes on while riding: (P81)

Fuel reserve indicator

When this indicator comes on, remaining fuel

approximately 0.58 US gal (2.2 liters)

Operation Guide

High beam indicator

Turn signal indicator

Neutral indicator

Comes on when the transmission is in Neutral.

PGM-FI (Programmed Fuel Injection)

malfunction indicator lamp (MIL)

Comes on briefly when the ignition switch is turned on

with the engine stop switch in the RUN position.

If it comes on while engine is running: (P82)

Operation Guide

Switches

Engine stop switch

Should normally remain in the

RUN position.

uIn an emergency, switch to

OFF the position to stop

the engine.

Headlight dimmer switch

• : High beam

• : Low beam

Horn button

Start button

Headlight turns off when

operating the starter motor.

(VT1300CR/CRA)

Turn signal switch

uPressing the switch turns

the turn signal off.

continued

Operation Guide

Engine stop switch

Should normally remain in the

RUN position.

uIn an emergency, switch to

OFF the position to stop

the engine.

Headlight dimmer switch

• : High beam

• : Low beam

Start button

Headlight turns off when

operating the starter motor.

(VT1300CT/CTA)

Turn signal switch

uPressing the switch turns

the turn signal off.

Horn button

Switches (Continued)

Operation Guide

Ignition Switch

Switches the electrical system on/off.

uKey can be removed when in the OFF

position.

Steering Lock

Lock the steering when parking to help

prevent theft.

A U-shaped wheel lock or similar device is

also recommended.

❙

Locking

!aTurn the handlebar all the way to the left.

!bInsert the steering lock key in the steering

lock and turn it counterclockwise, then push

down and turn the key clockwise.

!cRemove the key.

❙

Unlocking

Insert the steering lock key and turn it

counterclockwise.

Turns electrical

system on for

starting/riding.

OFF

Turns engine off.

Push

Turn

Steering

lock ley

Turn

continued

Operation Guide

Starting the Engine

Start your engine using the following

procedure, regardless of whether the engine

is cold or warm.

!aMake sure the engine stop switch is in the

RUN position.

!bTurn the ignition switch to the ON position.

!cShift the transmission to Neutral (

indicator comes on). Alternatively, pull in

the clutch lever to start your motorcycle

with the transmission in gear so long as the

side stand is raised.

!dPress the start button with the throttle

completely closed.

!c!d

NOTICE

•If the engine does not start within 5 seconds, turn the

ignition off and wait 10 seconds before trying to start

the engine again to recover battery voltage.

•Extended fast idling and revving the engine can

damage the engine, and the exhaust system.

•Snapping the throttle or fast idling for more than about

5 minutes may cause exhaust pipe discoloration.

Starting the Engine (Continued)

Operation Guide

If the engine does not start:

!aOpen the throttle fully and press the start

button for 5 seconds.

!bRepeat the normal starting procedure.

!cIf the engine starts, open the throttle slightly

if idling is unstable.

!dIf the engine does not start, wait 10 seconds

before trying steps !a & !b again.

❙

If Engine Will Not Start (P80 )

Operation Guide

Refueling

Do not fill with fuel above the filler neck.

Fuel type: Unleaded gasoline only

Recommended fuel octane number:

Pump Octane Number (PON) 86 or higher.

Tank capacity: 4.36 US gal (16.5 liters)

❙

Refueling and Fuel Guidelines (P13)

Opening the Fuel Fill Cap

Open the lock cover, insert the ignition key,

and turn it clockwise to open the cap.

Closing the Fuel Fill Cap

!aAfter refueling, align the fuel fill cap latch

with the slot in the filler neck. Push the fuel

fill cap into the filler neck until it snaps

closed and locks.

!bRemove the key and close the cover.

uThe key cannot be removed if the cap is

not locked.

Ignition key

Fuel fill cap

Lock cover

Fuel filler

opening

Filler neck

Fuel level (max)

WARNING

Gasoline is highly flammable and

explosive. You can be burned or

seriously injured when handling fuel.

• Stop the engine, and keep heat,

sparks, and flame away.

• Handle fuel only outdoors.

• Wipe up spills immediately.

Produktspezifikationen

Marke:	Honda
Kategorie:	Motor
Modell:	Interstate VT1300CT (2013)

Brauchst du Hilfe?

Wenn Sie Hilfe mit Honda Interstate VT1300CT (2013) benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Motor Honda

Honda Gold Wing GL1800 (2019) Bedienungsanleitung

16 Oktober 2024

Honda ADV160 (2022) Bedienungsanleitung

14 Oktober 2024

Honda CBR650R (2023) Bedienungsanleitung

4 Oktober 2024

Honda CRF250L (2015) Bedienungsanleitung

3 Oktober 2024

Honda Africa Twin CRF1100 (2020) Bedienungsanleitung

21 September 2024

Honda VF750C (1995) Bedienungsanleitung

17 September 2024

Honda XRV750 (1997) Bedienungsanleitung

5 September 2024

Honda CRF250RWE (2025) Bedienungsanleitung

5 September 2024

Honda NX500 (2021) Bedienungsanleitung

3 September 2024

Honda Deauville NT700V (2006) Bedienungsanleitung

3 September 2024

Bedienungsanleitung Motor

Neueste Bedienungsanleitung für -Kategorien-

Husqvarna 701 Supermoto (2018) Bedienungsanleitung

16 Oktober 2024

Triumph Street Triple R (2020) Bedienungsanleitung

15 Oktober 2024

Triumph Daytona 675 R (2013) Bedienungsanleitung

15 Oktober 2024

KTM 250 XC (2018) Bedienungsanleitung

14 Oktober 2024

KTM 690 Duke R (2011) Bedienungsanleitung

13 Oktober 2024

Triumph Street Triple RX (2016) Bedienungsanleitung

13 Oktober 2024

KTM 350 XC-F (2017) Bedienungsanleitung

12 Oktober 2024

KTM Freeride E-XC (2020) Bedienungsanleitung

12 Oktober 2024

Husqvarna TE 250 (2015) Bedienungsanleitung

11 Oktober 2024

KTM 250 EXC-F Six Days (2010) Bedienungsanleitung

10 Oktober 2024