HK Audio Linear 7 110 XA Bedienungsanleitung

HK Audio Lautsprecher Linear 7 110 XA

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für HK Audio Linear 7 110 XA (39 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/39
Manual 1.2
• English • Français• Deutsch • Italiano • Español
LINEAR 7
LINEAR 7 110 XA • LINEAR 7 112 XA
LINEAR 7 112 FA • LINEAR 7 115 FA
LINEAR 7 118 Sub A
LINEAR 7 1.2
3
Welcome to the HK Audio family!
Thank you for choosing a brand-name product made by our company. Rest
assured, we engineered and built it with the greatest care so it will serve
you well for many tomorrows to come.
Even if your experience with sound systems runs deep, some things
about this product are sure to be new to you. This is why we ask that you do
not set this manual aside without reading it fi rst. Be sure to keep it in a
safe place for later reference.
Here's wishing you the best sound at every occasion!
Your HK Audio team
Strong electromagnetic interference or electrostatic discharge
may prevent the product from functioning normally. If this happens, the
product may be returned to normal operation by powering o and on
again. Should this not result in the product functioning normally again,
please move the product away from the source of disturbance and try
again.
Warranty
Use the convenient online registration option at www.hkaudio.com.
http://warranty.hkaudio.com
The registration is only valid if the device is registered within 30 days of
the date of purchase.
HK Audio
Technischer Service
Postfach 1509
66595 St. Wendel, Germany
Fax: +49 6851 905 100
• English • Français• Deutsch • Italiano • Español
LINEAR 7
L7 110 XA L7 112 FA L7 112 XA L7 115 FA L7 118 Sub A
LINEAR 7 1.2
4
1 General Information
Unpacking and Inventorying
When you fi rst unpack your LINEAR 7 speaker cabinet, take a quick
inventory to make sure it comes complete with the manual and Powercon
mains cable.
2 Connectors and Controls
+ dB6
0 B d
Input
DSP Out
Thru Gain
1
5
2 3
4
L7 XA/FA models
+ dB dB 6 6
0 B d
Input
L
R
DSP Out
Thru Gain
1
5
2
1 2
3
4
4
L7 118 Sub A
1 Input
This XLR/ 1/4" (6.35 mm) combo jack provides a balanced input for analog
signals.
• L7 XA/FA models have one input channel.
The L7 118 Sub A subwoofer has two separate inputs for the left and right
signals. The two channels are equal and merged post-preamp, so you can
use either one in mono mode.
2 Thru
Use this parallel, balanced XLR output to send the signal routed into the
Input through to other components. This output remains active even when
the electronic components are deactivated. The subwoofer has two of these
ports.
3 Gain
Use this knob to adjust the input gain for the incoming signal.
• The control range for the XA/FA models sweeps from –∞ (mute) to +6 dB.
This knob adjusts the gain for both of the L7 118 Sub A's stereo preamp
channels in a range of -6 to +6 dB.
The center-notched 12 o'clock position is 0 dB in both cases.
Heads up: The Gain setting does not a ect the signal sent to the DSP
Out.
4 Input/Limiter LED
This LED lights up green to indicate incoming signals and red to indicate
signal peaks. The LED briefl y fl ashes red to tell you the Limiter is
responding to signal peaks. If it stays red, turn down the Gain knob.
5 DSP Out
Use this XLR port to forward the signal routed into the Input jack or to
forward a digital audio signal streamed* in via Milan™, an AVB-based digital
audio network protocol. The onboard DSP can process both types of signals.
This means the DSP Out can serve as a network interface that lets you
integrate an added powered speaker that is not equipped with Ethernet
ports. You can even use it as an audio interface to send audio signals
streamed* in to the LINEAR 7 speaker on to other speakers, for example, to
powered LINEAR SUB series subwoofers.
In the factory default confi guration, the unprocessed input signal goes
straight to DSP Out it, regardless of the selected preset and the Gain knob
setting.
Power
Auto Sleep
On Off
Data
Flat
Low Cut
Remote
Preset
1
2
3
4
Thru
In
Ethernet
Boost
6
7
8
6 Ethernet In /Thru
Use the two Ethercon ports to integrate the speaker into a network. They
accept RJ45 and Ethercon (NE8 MX, NE8 MX6, NE8 MC) plugs. Use the
Ethernet Thru port to forward the network signal.
Always use S/STP or S/FTP cables to shield against electromagnetic
interference. We recommend CAT6 cables. A separate manual explains the
ner points of network integration, remote control functions and audio
streaming*.
You will nd it on the LINEAR 7 download page at www.hkaudio.com. For a
brief description of the DSP functions, see section 8 Preset.
7 Data
This LED lights up orange when data ows through the network connector.
*MILAN™ implementation/certifi cation was in the works at the time of writing. Visit www.hkaudio.com to get an update.


Produktspezifikationen

Marke: HK Audio
Kategorie: Lautsprecher
Modell: Linear 7 110 XA

Brauchst du Hilfe?

Wenn Sie Hilfe mit HK Audio Linear 7 110 XA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Lautsprecher HK Audio

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung für -Kategorien-