Hitachi CP-X950W Bedienungsanleitung
Hitachi
Projektoren
CP-X950W
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hitachi CP-X950W (30 Seiten) in der Kategorie Projektoren. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/30
1
Contents Page
Liquid Crystal Projector
Model name
CP-X950W/E
OPER TING GUIDEA
Thank you very much for purchasing this Hitachi Liquid Crystal Projector.
Please read this operating guide to use correctly. After reading this manual, keep it carefully for future
reference.
Before us ............................. 3e
Names and functions of each
part ............................... 8
Installatio ........................... 11n
Basic operation .................. 12s
Adjustments and function .. 14s
Connection to the video signal
terminal ..................... 19s
Connection to the RGB signal
terminal ..................... 19s
Connection to the control
signal termina ............ 22l
Example of system setu .... 27p
Cleaning the air filte ........... 27r
Lamp ................................... 28
Message tabl ..................... 28e
When you think something
wrong ......................... 29
Specification ...................... 30s
ON
LAMP
TEMP
STANDBY
/ON
INPUT
MUTE
ZOO M
FOCUS
MENU
RESET
Outline
This Liquid Crystal Projector can display various
computer signals and NTSC/ AL/SECAM video signals.P
Features
(1) High brightness
A highly efficient optical system with a metal halide lamp
ensures high brightness.
(2) High resolution
Three separate high-definition liquid crystal panels are used
for the R, G and B signals.
(3) Compact size, light weight for portability
(4) RGB output terminal
(5) RS232C Communication
(6) Mouse emulation
(7) Power zoom and power focus functions
(8)
Complies with VESA DDC1/2B specifications
2
FOR THE CUSTOMERS IN U.K
THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE.
FOR THE U.K PLEASE REFER TO THE NOTES ON THIS PAGE.
IMPORTANT FOR UNITED KINGDOM
WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is
indicated on the pin face of the plug. Shoud the fuse need to be replaced, an ASTA or BSI approved BS 1362
fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted. If
a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug.
Fuse covers are available from your dealer.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in
your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension
lead or consult your dealer.
Shoud it be necessary to change the mains plugs, this must be carried out by a competent person, preferable a
qualified electrician.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first
removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.
WARNING: THIS EQUIPMENT MUST BE EA THEDR
IMPO AN :RT T
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow = Earth, Blue = Neutral, Brown = Live.
As these colours may not correspond with the coloured makings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked
with the letter E or by the earth symbol or coloured Green or Green and Yellow.
The wire coloured Blue must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
Green & Yellow to Earth
Blue to Neutral
Brown to Live
Fuse
Cord Clamp
3
WARNING: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications, Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Instructions to Users:
This equipment complies with the requirements of FCC (Federal Communication Commission) Class A
equipments provided that following conditions are met.
(1) Video signal cables:
Double shielded coaxial cables (so called FCC shield cable) must be used and the outer shield must be
connected to the ground. Or, if normal coaxial cables are used, the cables must be enclosed in metal pipes
or similar way to reduce the interference noise radiation.
(2) Power cord:
Shielded power cord must be used. The outer shield must be connected to the ground.
(3) Video inputs:
The input signal amplitude must no exceed the specified level.
The mark informs you that there is a warning (including caution).
The concrete details of the warning (the left diagram shows the caution for an
electric shock hazard) is shown in the diagram.
The mark informs you of a prohibited action. The concrete prohibited action
(the left diagram shows the prohibition of disassembly) is drawn in the diagram
or near it.
The mark informs you of actions you must do. The concrete instruction
details (the left diagram shows “Disconnect the power plug from the power
outlet”) is drawn in the diagram.
Examples of
illustrated
marks
This shows that a person could be killed or injured if the wrong operation
is done by ignoring this indication.
This shows that a person could be injured or material may be damaged if
the wrong operation is done by ignoring this indication.
Caution
Warning
<Before Use>
Illustrated marks Various illustrated marks are used in this product and instruction manual so the product
is used correctly and safely, and also to protect you and others from danger and your
property from being damaged.
Before use
Produktspezifikationen
| Marke: | Hitachi |
| Kategorie: | Projektoren |
| Modell: | CP-X950W |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hitachi CP-X950W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Projektoren Hitachi
16 Oktober 2024
15 Oktober 2024
13 Oktober 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
Bedienungsanleitung Projektoren
- Projektoren Samsung
- Projektoren 3M
- Projektoren Acer
- Projektoren Sanyo
- Projektoren BenQ
- Projektoren Philips
- Projektoren Sony
- Projektoren Panasonic
- Projektoren Sharp
- Projektoren Mitsubishi
- Projektoren Salora
- Projektoren JVC
- Projektoren Optoma
- Projektoren Toshiba
- Projektoren Epson
- Projektoren ViewSonic
- Projektoren Dell
- Projektoren Ricoh
- Projektoren Barco
- Projektoren Bauer
- Projektoren Eiki
- Projektoren InFocus
- Projektoren NEC
- Projektoren Planar
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
13 Oktober 2024
11 Oktober 2024
11 Oktober 2024
10 Oktober 2024
9 Oktober 2024
8 Oktober 2024
14 Juli 2024