Hitachi CP-X940W Bedienungsanleitung
Hitachi
Projektoren
CP-X940W
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hitachi CP-X940W (33 Seiten) in der Kategorie Projektoren. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/33
ENGLISH
This Liquid Crystal Projector can display various computer
signals and NTSC/PAL/SECAM video signals.
Outline
(1) High brightness
A highly efficient optical system with a UHP lamp ensures
high brightness.
(2) High resolution
Three separate high-definition liquid crystal panels are
used for the R, G and B signals.
(3) Compact size, light weight for portability
(4) RGB output terminal
(5) RS232C Communication
(6)
Mouse emulation
(7)
Power zoom and power focus functions
(8)
Complies with VESA DDC1/2B specifications
(9) Auto-adjustment function
Contents Page
Features
Liquid Crystal Projector
Model name
Thank you very much for purchasing this hitachi Liquid Crystal Projector.
Please read this operating guide to use correctly. After reading this manual, keep it carefully for
future reference.
OPERATING GUIDE
CP-X940W/E
Before use ......................................3
Contents of shipping box..................8
Names and functions of each part ..8
Installation ....................................12
Basic operations ............................13
Adjustments and functions ............16
Connection to the video signal
terminals ................................20
Connection to the RGB signal
terminal ..................................20
Connection to the control
signal terminal ........................23
Example of system setup ..............28
Cleaning the air filter ......................29
Lamp ..............................................30
Message table................................31
When you think something wrong ..32
Specifications ................................33
As these colours may not correspond with the coloured makings identifying the terminals in your plug,
proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol or coloured Green or Green and Yellow.
The wire coloured Blue must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or
coloured BROWN or RED.
FOR THE CUSTOMERS IN U.K
THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE.
FOR THE U.K PLEASE REFER TO THE NOTES ON THIS PAGE.
IMPORTANT FOR UNITED KINGDOM
WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which
is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS
1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover
omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin
face of the plug. Fuse covers are available from your dealer.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points
in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved
extension lead or consult your dealer.
Should it be necessary to change the mains plugs, this must be carried out by a competent person,
preferable a qualified electrician.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having
first removed the fuse, to avoid a possible shock hazard by inadvertent connection to the mains supply.
2
Green & Yellow to Earth
Fuse
Cord Clamp
Brown to Live
Blue to Neutral
WARNING: THIS EQUIPMENT MUST BE EARTHED
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
Green and Yellow=Earth, Blue=Neutral, Brown=Live.
3
ENGLISH
Before use
Examples of
illustrated marks
(Before Use)
Illustrated marks Various illustrated marks are used in this product and instruction manual so
the product is used correctly and safely, and also to protect you and others from
danger and your property from being damaged.
This shows that a person could be killed or injured if the
wrong operation is done by ignoring this indication.
This shows that a person could be injured or material may be
damaged if the wrong operation is done by ignoring this
indication.
The mark informs you that there is a warning (including caution).
The concrete details of the warning (the left diagram shows the
caution for an electric shock hazard) is shown in the diagram.
The mark informs you of a prohibited action. The concrete
prohibited action (the left diagram shows the prohibition of
disassembly) is drawn in the diagram or near it.
The mark informs you of actions you must do. The concrete
instruction details (the left diagram shows "Disconnect the power
plug from the power outlet") is drawn in the diagram.
Warning
Caution
WARNING:This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications,
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Instructions to Users:
This equipment complies with the requirements of FCC (Federal Communication Commission)
Class A equipments provided that following conditions are met.
(1) Video signal cables:
Double shielded coaxial cables (so called FCC shield cable) must be used and the outer shield must be
connected to the ground. Or, if normal coaxial cables are used, the cables must be enclosed in metal
pipes or similar way to reduce the interference noise radiation.
(2) Power cord:
Shielded power cord must be used. The outer shield must be connected to the ground.
(3) Video inputs:
The input signal amplitude must no exceed the specified level.
Produktspezifikationen
| Marke: | Hitachi |
| Kategorie: | Projektoren |
| Modell: | CP-X940W |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Hitachi CP-X940W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Projektoren Hitachi
16 Oktober 2024
15 Oktober 2024
13 Oktober 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
13 Juli 2024
Bedienungsanleitung Projektoren
- Projektoren Samsung
- Projektoren 3M
- Projektoren Acer
- Projektoren Sanyo
- Projektoren BenQ
- Projektoren Philips
- Projektoren Sony
- Projektoren Panasonic
- Projektoren Sharp
- Projektoren Mitsubishi
- Projektoren Salora
- Projektoren JVC
- Projektoren Optoma
- Projektoren Toshiba
- Projektoren Epson
- Projektoren ViewSonic
- Projektoren Dell
- Projektoren Ricoh
- Projektoren Barco
- Projektoren Bauer
- Projektoren Eiki
- Projektoren InFocus
- Projektoren NEC
- Projektoren Planar
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
15 Oktober 2024
15 Oktober 2024
13 Oktober 2024
11 Oktober 2024
11 Oktober 2024
10 Oktober 2024
9 Oktober 2024
8 Oktober 2024
14 Juli 2024