Hitachi CP-WX11000 Bedienungsanleitung

Hitachi Beamer CP-WX11000

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hitachi CP-WX11000 (78 Seiten) in der Kategorie Beamer. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/78
1
Projector
CP-X10000/CP-WX11000/CP-SX12000
User's Manual (detailed) – Operating Guide
Thank you for purchasing this projector.
Before using this product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
About this manual
About this manual
About this manual About this manual
WARNING
CAUTION
This entry warns of a risk of serious personal injury or even
death.
This entry warns of a risk of personal injury or physical damage.
Please refer to the pages written following this symbol.
Windows® is a registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
• Mac® is a registered trademark of Apple Inc.
• DVI is a trademark of Digital Display Working Group.
HDMI, the HDMI logo and High-De nition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
Trademark PJLink is a trademark applied
for trademark rights in Japan, the United
States of America and other countries and areas.
All other trademarks are the properties of their respective owners.
NOTICE This entry notices of fear of causing trouble.
53
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
DAISY CHAIN: Select this type, if it is required to
connect multiple projectors using a shared RS-232C
communication bus, from the computer. (
Network
Guide - 3.8 Multi-controlling the plural projectors (using
DAISY CHAIN function))
OFF: Select this mode if you want to output no data
from the CONTROL
CONTROL
CONTROL
CONTROL OUT
OUT
OUT
OUTCONTROL OUT port.
SERIAL IN SETTING/SERIAL OUT SETTING
In these menus, you can select
the communication condition for
each of the CONTROL
CONTROL
CONTROL
CONTROL IN
IN
IN
INCONTROL IN and
CONTROL
CONTROL
CONTROL
CONTROL OUT
OUT
OUT
OUTCONTROL OUT ports.
BAUD RATE
4800 bps
9600 bps
38400 bps
19200 bps
PARITY
NONE
ODD
EVEN
TRANSMISSION METHOD
This menu is available only when the NETWORK
BRIDGE is selected for the COMMUNICATION TYPE.
Select the transmission method for communication by
the NETWORK BRIDGE from the
CONTROL
CONTROL
CONTROL
CONTROL OUT
OUT
OUT
OUTCONTROL OUT
port.
HALF-DUPLEX
FULL-DUPLEX
HALF-DUPLEX: This method lets the projector make
two way communication, but only one direction, either
transmitting or receiving data, is allowed at a time.
FULL-DUPLEX: This method lets the projector make
two way communication, transmitting and receiving
data at the same time.
OFF is selected as the default setting.
• When you select the NETWORK BRIDGE, check
the item, TRANSMISSTION METHOD.
NOTE
• HALF-DUPLEX is selected as the default
setting.
When you select HALF-DUPLEX, check the items,
RESPONSE LIMIT TIME and BYTES INTERVAL TIMEOUT.
NOTE
54
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
RESPONSE LIMIT TIME
This menu is available only when the NETWORK
BRIDGE is selected for the COMMUNICATION
TYPE and the HALF-DUPLEX is selected for the
TRANSMISSION METHOD.
Select the time period to wait for receiving response
data from other devise communicating by the
NETWORK BRIDGE and the HALF-DUPLEX through
the CONTROL
CONTROL
CONTROL
CONTROL OUT
OUT
OUT
OUTCONTROL OUT port.
OFF
1s
2s
3s
OFF: Select this mode if it is not required to check the
responses from the devise that the projector sends data
to. In this mode, the projector can send out data from
the computer continuously.
1s/2s/3s: Select the time period to keep the projector
waiting for response from the device that the projector
sends data to. While waiting the response, the projector
does not send out any data from the
CONTROL
CONTROL
CONTROL
CONTROL OUT
OUT
OUT
OUTCONTROL OUT
port.
BYTES INTERVAL TIMEOUT
This menu is available only when NETWORK BRIDGE
is selected for the COMMUNICATION TYPE and HALF-
DUPLEX is selected for the TRANSMISSION METHOD.
Select the blank time length to judge that the response
data has nished in the communicating in the condition
of the NETWORK BRIDGE and the HALF-DUPLEX
through the CONTROL
CONTROL
CONTROL
CONTROL OUT
OUT
OUT
OUTCONTROL OUT port.
50ms
100ms
150ms
200ms
50ms is selected as the default setting.
NOTE
• OFF is selected as the default setting.
NOTE


Produktspezifikationen

Marke: Hitachi
Kategorie: Beamer
Modell: CP-WX11000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hitachi CP-WX11000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Beamer Hitachi

Bedienungsanleitung Beamer

Neueste Bedienungsanleitung für -Kategorien-