Hisense 100L10E Bedienungsanleitung

Hisense Fernseher 100L10E

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hisense 100L10E (15 Seiten) in der Kategorie Fernseher. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/15
INSTALLATION GUIDE
ES-G1835M8
1
The Hisense Laser TV Display Screen has a bezel trim and is designed to be used in rooms where the ceiling light cannot be
moved.
Product Description
Dust, dirt and scratches on the screen will affect how images appear. Follow the instructions below to properly maintain the
screen.
1) The screen surface has a horizontal structure.
DO NOT wipe the screen up and down or in a circular motion.
Wipe from left to right only.
2) Clean the dust on the screen surface with a soft brush or microfiber cloth. A rough towel or cloth might damage the surface.
3) Gently wipe the screen with a moistened microfiber cloth with mild soap diluted in water.
IMPORTANT:
Take heed to the following precautions at all times in order to avoid damaging the
screen. It is not covered under warranty.
• Don’t touch the screen material to avoid leaving fingerprints. Use gloves when handling the material.
• Don’t scratch the material, as it will leave permanent markings on the screen’s surface.
• Don’t point to the screen material with a fingertip or other sharp objects to prevent damage to the material.
• Don’t use acetone, benzene, alcohol and any other organic solvents to clean the screen material. Using such chemicals
will permanently damage the screen.
Maintaining the Screen
Required Tools to Install the Screen
Tape measure Stud î‚¿nder Level Pencil
Screwdriver with 5/16"(8mm)
drill bit for wood stud
Hammer for concrete Phillips screwdriver Tape
anchors
Hardware and Parts List for Screen Mounts
ST5.5x70 Screws (x4) M3x6 Screws (x6)
Drill bolt 8 x 60,
Polyamide 6 (PA6) (x4)
Bracket wands (x2)
460mm
Bracket wands (x2)
500mm
Handle (x2)
Hanging component (x2)
Velcro strips (x4)
Bracket wands (x2)
269mm
Paper template (x1)
2
Hardware and Parts List for Screen
Make sure you have all of the parts shown below before you begin the installation procedure.
No. Name Picture Qty. No. Name Picture Qty.
A
Elbow Joints
(the side with an arc
edge is front)
8 B
Horizontal Frame
(Spring inserted into the
frame already)
1
C
Left/Right Vertical
Frame(Spring inserted
into the frame already)
2 D1 Vertical Edge Trim
(short) 2
D2 Top Edge Trim
(long) 1 D3 Bottom Edge Trim
(long with logo) 1
EUpper Frame
Assembly 1 F Bottom Frame 2
G M3x6 Screws 20 H M5x6 Screws 32
I
ST5.5x70 Screws
(from the hardware
and parts list for screen
mounts)
4 J M5x14 Screws 4
K Spring Hook 2 L1 Long Fiberglass Rod 2
L2 Short Fiberglass Rod 2 M Corner Sleeve 4
NWhite Gloves
(for screen installation) 4 O Cloth Liner
for Assembly
1
PStarBright CLR®
Material
1 Q Support Rod 1


Produktspezifikationen

Marke: Hisense
Kategorie: Fernseher
Modell: 100L10E

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hisense 100L10E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Fernseher Hisense

Bedienungsanleitung Fernseher

Neueste Bedienungsanleitung für -Kategorien-