Hikvision Turbo HD TVI Turret Camera Bedienungsanleitung

Hikvision Sicherheitskamera Turbo HD TVI Turret Camera

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision Turbo HD TVI Turret Camera (4 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

TVI Turret Camera

User Manual

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual applies to

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

0100001040919

FCC Conditions

This device complies with part 15 of the FC C

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/E C (battery directive):This

product contains a battery that cannot

be disposed of as unsorted municipal

waste in the European Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

This series of camera adopts new generation

sensor with high sensitivity and advanced circuit

design technology It features high resolution,.

low image distortion and low noise, etc , which.

makes it suitable for surveillance system and

image processing system.

l High performance CMOS sensor and high

resolution bring high-quality image;

l Low illumination;

l OSD menu, parameters are configurable;

l Support auto white balance, auto gain control,

Support image effect adjustment;

Unit transmission control;

l Advanced 3-axis design meets different

installation requirements.

1 Introduction

1.1 Product Features

1.2 Overview

UD.6L0201D1603A01

2012/19/E U (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

Please refer to the product specification for

camera parameters and functions.

This product and - if applicable - the

supplied accessories too are marked

with "C E" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/E C, the EM C Directive 2004/108/EC,

the RoHS Directive 2011/65/EU.

1.2.1 Overview of Type I Camera

1.2.2 Overview of Type Camera

Enclosure

HD Video Cable

Mounting Base

1.2.3 Overview of Type CameraIII

2 Installation

Before you start:

l Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

l Make sure that all the related equipment is

power-off during the installation.

l Check the specification of the products for the

installation environment.

l Check whether the power supply is matched

with your power output to avoid damage.

l Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

l If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

l If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

2.1 Installation of Type CameraI

Steps:

1.Drill the screw holes according to the drill

template.

Figure 2-1 The Drill Template

2. Screw the clip plate onto the mounting base

loosely.

Power Cable

HD Video Cable

Mounting Base

Camera

Trim Ring Enclosure

Power Cable

Camera

Trim Ring

Enclosure

Camera

HD Video Cable

Power Cable

Mounting Base

3. Fix the mounting base to the ceiling with the

supplied screws.

4.Route the cables to the cable hole and connect

the corresponding power cable and video cable.

5.Pull out the clip plate and secure the camera

with the trim ring to the mounting base.

6.Push the clip plate in and tighten the lock screw

to secure the trim ring.

Figure 2-2 Screw the Clip Plate

Clip Plate

Screw hole

TURBO HD

Type

III

Model

DS-2CE56D1T-IRM

DS-2CE56D1T-IT3

DS-2CE56D1T-IR

Side Opening

Figure 2-3 Fix the the Camera

6.Adjust the camera according to the figure below

to get an optimum angle.

Figure 2-4 3-axis Adjustment

0 ~360° °

0 ~75° °

0 ~360° °

2.2 Installation of Type CameraII

1.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

Steps:

Figure 2-5 The Drill Template

Figure 2-6 Fix the Mounting Base and Camera

2.Fix the mounting base to the ceiling with the

supplied screws.

3.Route the cables to the cable hole and connect

corresponding power cable and video cable.

4.Secure the camera to the mounting base.

5.Fix the enclosure to camera.

6.Attach the trim ring to the camera and rotate

it clockwise to secure the camera loosely.

0 ~360° °

0 ~75° °

0 ~360° °

Figure 2-7 3-axis Adjustment

2.3 Installation of Type CameraIII

3 Menu Operation

Figure 3-1 Main Menu

AWB

DAY&NIGHT SYSTEM

SPECIAL EFFECT

ESC

HOLD

FRAME

RATE

AUTO

USER

HOLD

8000K

6000K

COLOR

B/W

AUTO

CAMERA

ID DISP

PRIVACY

ZONE

MOTION

HLC

LANGUAGE

COLOR

GAIN

COLOR

HUE

SHARPNESS

EXIT

VIDEO. OUT

4200K

3200K

CONTRAST

BRIGHT

MIRROR

FLIP

NAME

DISP

FACTORY

INIT

EXT

PUSH

A coaxial camera controller (purchase separately)

is required to select the menu and adjust the

camera parameters.

3.1 VIDEO.OUT

You can set the frame rate as 25 fps/30fps.

3.2 DAY/NIGHT

Color, B/W, AUTO and EXT are selectable for DAY/

NI GHT switches. Under the mode of the AUTO and

EXT, you can set the IR LED as Smart and CDS. If the

IR LED is selected as Smart, you can set the bright-

ness of the I R LED.

3.3.3 AWB

Fi gure 3- 2 DAY/NIGH T Figure 3-3 AWB

SPECIAL

1. PRIVACY ZONE

2. MOTION

3. HLC

4. RETURN RET

Fi gure 3-4 SPECIAL

Motion: Set the Motion status as O N or OFF. Set

the SE NSIT I VITY from 0 to 255. Set the alarm status

as ICO N/T RAN CE/OF F. Set the hold time from

0 second to 255 seconds.

HLC: HLC supplements the brightness of the

peripheral area of the image. You can set the mask

value and threshold from 0 to 255.

Privacy zone: Select a PRIVACY area. Set the

MASK PAT as OF F, GRAY, WHITE or BLACK. Set the

SX/E X /SY/EY value to define the position and size

of the area.

DAY/NIGHT

1. MODE AUTO

2. D TO N 63

3. N TO D 63

4. DELAY TIME 20

5. RETURN RET

AWB

1. MODE AUTO

2. R-G GAIN 255

3. B-G GAIN 151

4. RETURN RET

Auto, User, Push, 8000k, 6000k, 4200k and 3000k

are selectable for AWB. Under the mode of AU TO,

you need to set the R-G/B-G Gain and to select an

indoor/outdoor mode. If the AWB mode is select

as User, You need to set the R/G/B Gain manually.

3.3.4 AE

You can set the A E mode as HOLD, DC and ESC.

: Brightness refers to the brightnessBrightness

of the image.

: Shutter denotes the speed of the shutter.Shutter

You can set the shutter as AUTO, 1/25, 1/30, 1/50,

1/60, 1/100, 1/120, 1/250, 1/500, 1/1k, 1/3k and

1/10k.

: You can set the flicker status as 50HZ/60H ZFlicker

to prevent image flicking.

: BLC bases on the back area to enhance theBLC

brightness of the whole image. You can set the

BLC gain from 0 to 16.

: AGC optimizes the clarity of image in poorAGC

light scene. The value of AGC can be set from 1-5.

: LSC corrects the phenomenon where theLSC

image gets darkened or blurred on the periphery.

3.3.5 SPECIAL

SYSTEM

1. CAMERA ID 255

2. ID DISP. ON

3. NAME DISP. ON

4. LANGUAGE ENG

5. FACTOR Y INIT OFF

6. RETURN RET

3.3.7 SYSTEM

You can set the camera ID from 0 to 255.

Select the ID display and name display status as

ON/OFF.

Chinese and English are selectable for the language

of the menu.

You can restore the camera to the default by

setting the factory initialization status as ON.

3.3.8 EXIT

Exit and Save & exit are selectable.

EFFECT

1. COLOR GAIN 200

2. COLOR HUE 200

3. SHARPNESS 25

4. CONTRAST 150

5. BRIGHT OFF. 1

6. MIRROR ON

7. FLIP ON

8. RETURN RET

Color Gain: Color gain adjust this feature to change

the saturation of the color. You can set the value

from 0 to 255.

: You can adjust the image H UE fromColor Hue

0 to 71.

: Sharpness determines the amount ofSharpness

detail that an imaging system can reproduce.

You can set the value from 0 to 255.

: Contrast enhances the difference inContrast

color and light between parts of an image.

You can set the value from 0 to 255.

: Bright Off. refers to the brightnessBright Off.

compensation of the image. You can set the bright

compensation value as 0 or 1.

: You can set the Mirror status as O N/OFF.Mirror

: You can set the F LIP status as ON/OFF.Flip

3.3.6 EFFECT

Figure 3-5 EFFEC T

Figure 3-6 SYST EM

Clip Plate

1.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

Steps:

Figure 2-8 The Drill Template

Figure 2-9 Fix the Mounting Base and Camera

2.Fix the mounting base to the ceiling with the

supplied screws.

3.Route the cables to the cable hole and connect

corresponding power cable and video cable.

4.Secure the camera to the mounting base.

Adjust the camera according to the figure below

to get an optimum angle.

0 ~360° °

0 ~75° °

0 ~360° °

Figure 2-10 3-axis Adjustment

Screw Hole

Cable Hole

Screw Hole

Cable Hole

7.Adjust the camera according to the figure 2-7 to

get an optimum angle and tighten the trim ring.

Produktspezifikationen

Marke:	Hikvision
Kategorie:	Sicherheitskamera
Modell:	Turbo HD TVI Turret Camera
WLAN:	Nein
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Höhe:	59.1 mm
Befestigungstyp:	Zimmerdecke
Betriebstemperatur:	-40 - 60 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Eingebauter Ethernet-Anschluss:	Nein
Typ:	CCTV Sicherheitskamera
Stromverbrauch (max.):	4 W
Unterstützte Sprachen:	CHI (SIMPL), CHI (TR), ENG
Analoges Signalformatsystem:	NTSC, PAL
Unterstützte Video-Modi:	1080p
Unterstützte Grafik-Auflösungen:	1920 x 1080 (HD 1080)
Rauschverhältnis (SNR):	62 dB
Geräuschunterdrückung:	Ja
Blickwinkel (FOV):	59.6 °
Schwenkbereich:	0 - 360 °
Neigungswinkelbereich:	0 - 75 °
Formfaktor:	Kuppel
Durchmesser:	89.6 mm
Maximale Auflösung:	1930 x 1088 Pixel
Unterstützung von Positionierung:	Outdoor
DC-Ausgang Volt:	12
Bis zu 30 Frames pro Sekunde:	25 fps
Megapixel insgesamt:	2 MP
Anzahl der Kameras:	1
Tag/ Nachtmodus:	Ja
Mindestbeleuchtung:	0 Lux
Eingebaute HDD:	Nein
Nachtsichtdistanz:	20 m
LED Typ:	IR
Sensor-Typ:	CMOS
Weißabgleich:	Auto
Wetterfest:	Ja
Nachtsicht:	Ja
Drehungswinkel:	360 °
Kamera Verschlusszeit:	1/25 - 1/50000 s
Maximale Blendenzahl:	1.2
Flip & Spiegel:	Ja
Datenschutz-Maskierung:	Ja
Infrarot (IR)-Abschaltfilter:	Ja
Teilnehmerausgang:	1
Bewegungssensor:	Ja
Feste Brennweite:	- mm
Anzahl der Sprachen:	2