Hikvision DS-2CE72DFT-PIRXOF Bedienungsanleitung

Hikvision Überwachungskamera DS-2CE72DFT-PIRXOF

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-2CE72DFT-PIRXOF (15 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/15

2 MP PIR Siren

Full Time Color Camera

User Manual

Thank you for purchasing our product. If there are any

quesons, or requests, do not hesitate to contact the

dealer.

This manual applies to the models below:

Type

Model

Type I Camera

DS- - 2CE12DFT PIRXOF

DS- - 2CE12DFT PIRXOF28

Type CameraII

DS- - 2CE72DFT PIRXOF

DS- - 2CE72DFT PIRXOF28

This manual may contain several technical mistakes or

prinng errors, and the content is subject to change

without noce. The updates will be added to the new

version of this manual. We will readily improve or

update the products or procedures described in the

manual.

01000020201211

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

FCC compliance: This equipment has been tested and

found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protecon

against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instrucon manual, may cause harmful interference to

radio communicaons. Operaon of this equipment in a

residenal area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

FCC Condions

This device complies with part 15 of the FCC Rules.

Operaon is subject to the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired

operaon.

EU Conformity Statement

This product and if applicable the - -

supplied accessories too are marked with

"CE" and comply therefore with the

applicable harmonized European

standards listed under the Low Voltage Direcve

20 /3 U, the EMC Direcve 201 30/EU,14 5/E 4/ the RoHS

Direcve 2011/65/EU.

20 2/1 19/EU (WEEE direcve): Products

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier

upon the purchase of equivalent new

equipment, or dispose of it at designated collecon

points. For more informaon see: www.recyclethis.info.

2006/66/EC (battery directive): This product contains a

baery that cannot be disposed of as

unsorted municipal waste in the European

Union. See the product documentaon for

specic baery informaon. The baery is

marked with this symbol, which may

include leering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the baery

to your supplier or to a designated collecon point. For

more informaon, see: www.recyclethis.info.

Industry Canada ICES 003 Compliance-

This device meets the CAN ICES 3 (A)/NMB 3(A) - -

standards requirements.

Warning

This is a class A product. In a domesc environment this

product may cause radio interference in which case the

user may be required to take adequate measures.

Safety Instrucon

Warnings

 In the use of the device, you must be in strict

compliance with the electrical safety regulaons of

the naon and region.

 Input voltage should meet both the SELV (Safety Extra

Low Voltage) and the Limited Power Source with 12

VDC according to the IEC60950 1 standard and -

IEC62368 1 standard. R er to technical specicaons -ef

for detailed informaon.

 Do not connect mulple devices to one power

adapter to avoid over heang or a re hazard caused -

by overload.

 The socket outlet shall be installed near the -

equipment and shall be easily accessible.

 Make sure that the plug is rmly connected to the

power socket.

 A readily accessible disconnect device shall be

incorporated external to the equipment.

 An all pole mains switch shall be incorporated in the -

electrical installaon of the building.

 If smoke, odor or noise rise from the device, turn o

the power at once and unplug the power cord, and

then contact the service center.

 Never aempt to disassemble the camera by

unprofessional personal.

Cauons

 No naked ame sources, such as lighted candles,

should be placed on the equipment.

 Install the equipment according to the instrucons in

this manual.

 To prevent injury, this equipment must be securely

aached to the oor/wall in accordance with the

installaon instrucons.

 Do not touch the sharp edges or corners.

 Do not drop the camera or subject it to physical

shock.

 Do not touch senor modules with ngers.

 Do not place the camera in extremely hot, cold (the

operang temperature shall be 40°C to 60°C), dusty -

or damp locaons, and do not expose it to high

electromagnec radiaon.

 If cleaning is necessary, use clean cloth with a bit of

ethanol and wipe it gently.

 Do not aim the camera at the sun or extra bright

places.

 The sensor may be burned out by a laser beam, so

when any laser equipment is in using, make sure that

the surface of sensor will not be exposed to the laser

beam.

 Do not expose the device to high electromagnec

radiaon or extremely hot, cold, dusty or damp

environment.

 To avoid heat accumulaon, good venlaon is

required for the operang environment.

 Keep the camera away from liquid while in use for

non water proof device.- -

 While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.

1 Introducon

1.1 Product Features

The main features are as follows:

 High performance CMOS sensor

Produktspezifikationen

Marke:	Hikvision
Kategorie:	Überwachungskamera
Modell:	DS-2CE72DFT-PIRXOF

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hikvision DS-2CE72DFT-PIRXOF benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Überwachungskamera Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2CE56C0T-IT3 Bedienungsanleitung

8 Oktober 2024

Hikvision iDS-TCV900-AI Bedienungsanleitung

3 Oktober 2024

Hikvision DS-2CE56C2T-IT3(3.6MM) Bedienungsanleitung

3 Oktober 2024

Hikvision iDS-2CD7A26G0/P-IZHS Bedienungsanleitung

2 Oktober 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024

Friedland E895 Bedienungsanleitung

10 Oktober 2024

Elro RM 140 Bedienungsanleitung

9 Oktober 2024

D-Link DCS-5000L Bedienungsanleitung

9 Oktober 2024

Dahua Technology Ultra IPC-HF7842F Bedienungsanleitung

8 Oktober 2024

Lorex E891AB Bedienungsanleitung

7 Oktober 2024

Overmax Camspot 3.6 Bedienungsanleitung

6 Oktober 2024