Hikvision DS-2CE56C2T-IT1(8MM) Bedienungsanleitung

Hikvision Sicherheitskamera DS-2CE56C2T-IT1(8MM)

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-2CE56C2T-IT1(8MM) (4 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Turret & Dome Camera
User Manual
www.hikvision.com
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual applies to
This manual may contain several technical
incorrect places or printing errors, and the
content is subject to change without notice.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
Regulatory Information
FCC Information
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
0100001040523
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
EU Conformity Statement
upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see: www.recyclethis.info.
2006/66/EC (battery directive):This
product contains a battery that cannot
be disposed of as unsorted municipal
waste in the European Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see: www.recyclethis.info.
This series of camera adopts new generation
sensor with high sensitivity and advanced circuit
design technology It features high resolution,.
low image distortion and low noise, etc , which.
makes it suitable for surveillance system and
image processing system.
l High performance CMOS sensor and high
resolution bring high-quality image;
l Low illumination;
l OSD menu, parameters are configurable;
l Support auto white balance, auto gain control,
electronic shutter control;
SMART IR mode;
l
l
Unit transmission control;
l Advanced 3-axis design meets different
installation requirements.
1 Introduction
1.1 Product Features
1.2 Overview
UD.6L0201D1443A01
2012/19/EU (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
Please refer to the product specification for
camera parameters and functions.
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC,
the RoHS Directive 2011/65/EU.
Type Model
I
II
III
DS-2CE56C2T-IRM
DS-2CE56C2T-IT1
DS-2CE56C2T-IT3
DS-2CE56C2T-IRMM
I
II
DS-2CE56D5T-IRM
DS-2CE56D5T-IT1
DS-2CE56D5T-IT3
720P
1080P
1.2.1 Overview of Type I Camera
Lower
Dome
Black Liner
Camera
Lock Screw
TVI
Power Cable
Switch Cable
Mounting Base
Camera
Trim Ring
Enclosure
Analog Video Cable
Analog Video Cable
TVI
Power Cable
Switch Cable
1.2.2 Overview of Type Camera
II
Enclosure
TVI
Analog Video Cable
Switch CablePower Cable
Mounting Base
1.2.3 Overview of Type CameraIII
2 Installation
Before you start:
l Please make sure that the device in the package
is in good condition and all the assembly parts
are included.
l Make sure that all the related equipment is
power-off during the installation.
l Check the specification of the products for the
installation environment.
l Check whether the power supply is matched
with your power output to avoid damage.
l Please make sure the wall is strong enough to
withstand three times the weight of the camera
and the mounting.
l If the wall is the cement wall, you need to insert
expansion screws before you install the camera.
If the wall is the wooden wall, you can use
self-tapping screw to secure the camera.
l If the product does not function properly,
please contact your dealer or the nearest
service center. Do not disassemble the camera
for repair or maintenance by yourself.
2.1 Installation of Type CameraI
Steps:
1.Drill the screw holes and the cable hole
according to the drill template.
Drilling Template
Screw Hole Screw Hole
Screw Hole
Figure 2-1 The Drill Template
2.Fix the mounting base to the ceiling with the
supplied screws.
3.Route the cables to the cable hole and connect
the corresponding power cable and video cable.
4.Secure the camera to the mounting base.
5.Fix the enclosure to camera to complet the
installation.
DS-2CE56C2T-IR
Figure 2-2 Fix the Mounting Base and the Camera
6.Adjust the camera according to the figure below
to get an optimum angle.
Figure 2-3 3-axis Adjustment
0 ~360° °
0 ~75° °
0 ~360° °
2.2 Installation of Type CameraII
1.Drill the screw holes and the cable hole on the
ceiling according to the supplied drill template.
Steps:
Figure 2-4 The Drill Template
Mounting Base
Hole Hole
Figure 2-5 Fix the Mounting Base and Camera
2.Fix the mounting base to the ceiling with the
supplied screws.
3.Route the cables to the cable hole and connect
corresponding power cable and video cable.
4.Secure the camera to the mounting base.
5.Fix the enclosure to camera.
6.Attach the trim ring to the camera and rotate
it clockwise to secure the camera loosely.
0 ~360° °
0 ~75° ° 0 ~360° °
Figure 2-6 3-axis Adjustment
2.3 Installation of Type CameraIII
1.Hold the mounting base, and rotate the lower
dome counterclockwise to disassemble the
lower dome and the black liner.
2.Drill the screw holes and the cable hole on the
ceiling according to the supplied drill template.
Steps:
Drilling Template
Screw Hole
Screw Hole
3.Route the cables to the cable hole and connect
the corresponding power cable and video cable.
4.Fix the mounting base to the ceiling with
the supplied screws.
5.Adjust the Lens
1).Loosen the tilting lock screws besides the
lens.
2).Adjust the camera from the pan angle
(0 ~ 355 ); tilt angle (0 ~ 90 ), and rotate° ° ° °
the lens(0 ~355 ) to get the optimum angle.° °
3).Tighten the tilting lock screws.
355°
355°
0-90°
6.Fit the black liner back to the camera.
7.Install the lower dome back to the camera and
rotate it clockwise to get it secured.
Figure 2-7 The Drill Template & Mounting
Base Installation
Figure 2-8 3-axis Adjustment
& Lower Dome
3 Menu Operation
Figure 3-1 Main Menu
Menu
SCENE LENS RESET
EXPOSURE WB DAY&NIGHT
BACKLIGHT NR SPECIAL ADJUST
INDOOR
OUT DOOR
INDOOR1
LOW-
LIGHT
MANUAL SHUT T ER
AGC
SENS- UP
BRIG HT NESS
D-WD R
DEFOG
BLC
HSBLC
AT W
AWC- SET
INDOOR
OUT DOOR
MANUAL
COLOR
B/W
EXT
2D NR
3D NR
CAM
TIT LE
D-EFFECT
MOT ION
PRIVACY
LAUGUAGE
DEFECT
VERSION
SHARPNESS
MONI T OR
LSC
VIDEO.
OUT
EXIT
SET UP
A coaxial camera controller (purchase separately)
is required to select the menu and adjust the
camera parameters.
3.1 VIDEO.OUT
PAL or NTSC is selectable .
3.2 LANGUAGE
English, Japanese, CHN1, CHN2, Korean, German,
French, Italian, Spanish, Polish, etc., are selectable.
3.3SETUP
3.3.1 SCENE
You can select indoor, outdoor, indoor 1 and low
-light as the working environments.
3.3.2 LENS
The camera is equipped with a fixed lens.
3.3.3 EXPOSURE
EXPOSURE
1. SHUTTER AUTO
2. AGC OFF
3. SENS-UP ---
4. BRIGHTNESS ---|------ 40
5. DEFOG OFF
6. BACKLIGHT OFF
7. RETURN RET
Figure 3-2 Exposure
SHUTTER: AUTO,1/25, 1/50, FLK, 1/200, 1/400,
1/1k, 1/2k, 1/5k, 1/10k, 1/50k, x2, x4, x6, x8, x10,
and x15 are selectable.
: You can set the AGC value from 0 to 15.AGC
: You can set the SENS-UP to OFF or AUTO.SENS-UP
: You can set the brightness valueBRIGHTNESS
from 1 to 100.
: You can set the D-WDR to ON to improveD-WDR
the image quality or OFF to disable the function.
: You can set the defog function as ON toDEFOG
enable the function. Position, size, and the defog
gradation are configurable.
3.3.4 Backlight
Backlight Compensation (BLC):
Set the gain of BLC as High, Middle, or Low.-GAIN:
Press the up/down/left/right button to-AREA:
define the BLC position and size. Select RET or
AGAIN to go back the BLC menu or re-define the
BLC area.
Restore the BLC settings to the default.-Default:
HSBLC:
Select an HSBLC area. Set the DISPLAY status as ON.
Press the up/down/left/right button to define the
area position and size. Set the HSBLC LEVEL from 0
to 100. Select ALL DAY or Night for the HSBLC mode.
Set the BLACK MASK status as ON or OFF.
HSBLC
1. SELECT AREA 1
2. DISPLAY ON 8
3. LEVEL ---|------ 40
4. MODE ALL DAY
5. BLACK MASK ON
6. DEFAULT 8
7. RETURN RET
Figure 3-3 HSBLC
3.3.5 White Balance (WB)
INDOOR, OUTDOOR, MANUAL, ATW (Auto-tracking
White Balance), AWC→SET are selectable.
3.3.6 Day & Night
Color, B/W, and EXT are selectable for DAY and
NIGHT switches.
3.3.7 NR
: You can set 2D NR status as ON or OFF.2D NR
: Set the Smart NR status as ON and adjust3D NR
the 3D smart NR sensitivity ranges from 0 to 100.
Set the 3D NR LEVEL ranges from 0 to 100. Set the
2D&3D NR
1. 2DNR OFF
2. 3DNR ON 8
3. RETURN RET
3D NR
1. SMART NR ON8
2. LEVEL ------|--8 0
3. START. AGC -|--------10
4. END. AGC -|--------10
5. RETURN RET
Figure 3-5 NR
Figure 3-6 3D NR
3.3.8 SPECIAL
: Edit the camera title on this section.Camera Title
:D-effect
: Set the freeze function as ON or OFF.-FREEZE
: OFF, MIRROR, V-FLIP, and ROTATE are-MIRROR
selectable for mirror.
: Define the zoom area by configuring-D-ZOOM
the position from PAN & TILT.
: The D-Zoom area, sensitivity-SMART D-ZOOM
and time are configurable.
: Set the NEG IMAGE as ON or OFF.-NEG.IMAGE
SPECIAL
1. CAM TITLE ON 8
2. D-DFFECT 8
3. MOTION OFF
4. PRIVACY OFF
5. LANGUAGE ENG 8
6. DEFECT 8
7. VERSION 130722
8. RETURN RET
Figure 3-7 Special
MOTION
1. SELECT AREA 1
2. DISPLAY ON8
3. SENSIT IVITY ----|---- 30
4. MOTION VIEW ON
5. DEFAULT 8
6. RETURN RET
Figure 3-8 Motion Detection
Motion: Select a MOTION area. Set the DISPLAY
status as ON or OFF. Press the up/down/left/right
button to define the position and size of the area.
Set the SENSITIVITY from 0 to 60. Set the MOTION
VIEW status as ON or OFF.
Privacy: Select a PRIVACY area. Set the DISPLAY
status as INV, MOSAIC, COLOR or OFF. Press the
up/down/left/right button to define the position
and size of the area.
Defect: LIVE DPC, STATIC DPC and Black DPC are
adjustable in this section.
: You can check the software version of theVersion
device.
PRIVACY
1. SELECT AREA 1
2. DISPLAY MOSAIC 8
3. COLOR 10
4. TRANS. 1
5. DEFAULT 8
6. RETURN RET
ADJUST
1. SHARPNESS --------|15
2. MONITOR LCD8
3. LSC OFF
4. VIDEO. OUT PAL
5. RETURN RET
3.3.9 ADJUST
: Adjust the sharpness from 0 to 15.Sharpness
: Monitor CRT, and Monitor LCD areMonitor
selectable.
: Set the LSC status as ON or OFF.LSC
3.3.10 RESET
Reset all the settings to the default.
3.3.11 EXIT
Press OK to exit the menu.
START. AGC level as the threshold to enable AGC,
and set the END. AGC level as the threshold to
disable AGC.
Figure 3-9 Privacy Mask Figure 3-10 Adjust


Produktspezifikationen

Marke: Hikvision
Kategorie: Sicherheitskamera
Modell: DS-2CE56C2T-IT1(8MM)
WLAN: Nein
Gewicht: 450 g
Produktfarbe: Weiß
Internationale Schutzart (IP-Code): IP66
Ãœbertragungstechnik: Kabelgebunden
Höhe: 89.1 mm
Befestigungstyp: Zimmerdecke
Betriebstemperatur: -40 - 60 °C
Stromverbrauch (Standardbetrieb): 4 W
Analoges Signalformatsystem: NTSC,PAL
Unterstützte Video-Modi: 720p
Rauschverhältnis (SNR): 62 dB
Blickwinkel (FOV): 34.5 °
Schwenkbereich: 0 - 360 °
Neigungswinkelbereich: 0 - 75 °
Formfaktor: Kuppel
Durchmesser: 114.6 mm
Maximale Auflösung: 1280 x 960 Pixel
Bis zu 30 Frames pro Sekunde: 30 fps
Megapixel insgesamt: 1.3 MP
Anzahl der Kameras: 1
Tag/ Nachtmodus: Ja
Mindestbeleuchtung: 0.01 Lux
Eingebaute HDD: Nein
Nachtsichtdistanz: 20 m
LED Typ: IR
Sensor-Typ: CMOS
Nachtsicht: Ja
Drehungswinkel: 360 °
Kamera Verschlusszeit: 1/50000 - 1/30 s

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hikvision DS-2CE56C2T-IT1(8MM) benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Sicherheitskamera Hikvision

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung für -Kategorien-