Hikvision DS-2CE56C2T-IT1(3.6MM) Bedienungsanleitung

Hikvision Überwachungskamera DS-2CE56C2T-IT1(3.6MM)

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-2CE56C2T-IT1(3.6MM) (4 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Turret & Dome Camera

User Manual

www.hikvision.com

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual applies to

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

0100001040523

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/EC (battery directive):This

product contains a battery that cannot

be disposed of as unsorted municipal

waste in the European Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

This series of camera adopts new generation

sensor with high sensitivity and advanced circuit

design technology It features high resolution,.

low image distortion and low noise, etc , which.

makes it suitable for surveillance system and

image processing system.

l High performance CMOS sensor and high

resolution bring high-quality image;

l Low illumination;

l OSD menu, parameters are configurable;

l Support auto white balance, auto gain control,

electronic shutter control;

SMART IR mode;

Unit transmission control;

l Advanced 3-axis design meets different

installation requirements.

1 Introduction

1.1 Product Features

1.2 Overview

UD.6L0201D1443A01

2012/19/EU (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

Please refer to the product specification for

camera parameters and functions.

This product and - if applicable - the

supplied accessories too are marked

with "CE" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC,

the RoHS Directive 2011/65/EU.

Type Model

III

DS-2CE56C2T-IRM

DS-2CE56C2T-IT1

DS-2CE56C2T-IT3

DS-2CE56C2T-IRMM

DS-2CE56D5T-IRM

DS-2CE56D5T-IT1

DS-2CE56D5T-IT3

720P

1080P

1.2.1 Overview of Type I Camera

Lower

Dome

Black Liner

Camera

Lock Screw

TVI

Power Cable

Switch Cable

Mounting Base

Camera

Trim Ring

Enclosure

Analog Video Cable

TVI

Power Cable

Switch Cable

1.2.2 Overview of Type Camera

Enclosure

TVI

Analog Video Cable

Switch CablePower Cable

Mounting Base

1.2.3 Overview of Type CameraIII

2 Installation

Before you start:

l Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

l Make sure that all the related equipment is

power-off during the installation.

l Check the specification of the products for the

installation environment.

l Check whether the power supply is matched

with your power output to avoid damage.

l Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

l If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

l If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

2.1 Installation of Type CameraI

Steps:

1.Drill the screw holes and the cable hole

according to the drill template.

Drilling Template

Screw Hole Screw Hole

Screw Hole

Figure 2-1 The Drill Template

2.Fix the mounting base to the ceiling with the

supplied screws.

3.Route the cables to the cable hole and connect

the corresponding power cable and video cable.

4.Secure the camera to the mounting base.

5.Fix the enclosure to camera to complet the

installation.

DS-2CE56C2T-IR

Figure 2-2 Fix the Mounting Base and the Camera

6.Adjust the camera according to the figure below

to get an optimum angle.

Figure 2-3 3-axis Adjustment

0 ~360° °

0 ~75° °

0 ~360° °

2.2 Installation of Type CameraII

1.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

Steps:

Figure 2-4 The Drill Template

Mounting Base

Hole Hole

Figure 2-5 Fix the Mounting Base and Camera

2.Fix the mounting base to the ceiling with the

supplied screws.

3.Route the cables to the cable hole and connect

corresponding power cable and video cable.

4.Secure the camera to the mounting base.

5.Fix the enclosure to camera.

6.Attach the trim ring to the camera and rotate

it clockwise to secure the camera loosely.

0 ~360° °

0 ~75° ° 0 ~360° °

Figure 2-6 3-axis Adjustment

2.3 Installation of Type CameraIII

1.Hold the mounting base, and rotate the lower

dome counterclockwise to disassemble the

lower dome and the black liner.

2.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

Steps:

Drilling Template

Screw Hole

3.Route the cables to the cable hole and connect

the corresponding power cable and video cable.

4.Fix the mounting base to the ceiling with

the supplied screws.

5.Adjust the Lens

1).Loosen the tilting lock screws besides the

lens.

2).Adjust the camera from the pan angle

(0 ~ 355 ); tilt angle (0 ~ 90 ), and rotate° ° ° °

the lens(0 ~355 ) to get the optimum angle.° °

3).Tighten the tilting lock screws.

355°

0-90°

6.Fit the black liner back to the camera.

7.Install the lower dome back to the camera and

rotate it clockwise to get it secured.

Figure 2-7 The Drill Template & Mounting

Base Installation

Figure 2-8 3-axis Adjustment

& Lower Dome

3 Menu Operation

Figure 3-1 Main Menu

SCENE LENS RESET

EXPOSURE WB DAY&NIGHT

BACKLIGHT NR SPECIAL ADJUST

INDOOR

OUT DOOR

INDOOR1

LOW-

LIGHT

MANUAL SHUT T ER

AGC

SENS- UP

BRIG HT NESS

D-WD R

DEFOG

BLC

HSBLC

AT W

AWC- SET

INDOOR

OUT DOOR

MANUAL

COLOR

B/W

EXT

2D NR

3D NR

CAM

TIT LE

D-EFFECT

MOT ION

PRIVACY

LAUGUAGE

DEFECT

VERSION

SHARPNESS

MONI T OR

LSC

VIDEO.

OUT

EXIT

SET UP

A coaxial camera controller (purchase separately)

is required to select the menu and adjust the

camera parameters.

3.1 VIDEO.OUT

PAL or NTSC is selectable .

3.2 LANGUAGE

English, Japanese, CHN1, CHN2, Korean, German,

French, Italian, Spanish, Polish, etc., are selectable.

3.3SETUP

3.3.1 SCENE

You can select indoor, outdoor, indoor 1 and low

-light as the working environments.

3.3.2 LENS

The camera is equipped with a fixed lens.

3.3.3 EXPOSURE

EXPOSURE

1. SHUTTER AUTO

2. AGC OFF

3. SENS-UP ---

4. BRIGHTNESS ---|------ 40

5. DEFOG OFF

6. BACKLIGHT OFF

7. RETURN RET

Figure 3-2 Exposure

SHUTTER: AUTO,1/25, 1/50, FLK, 1/200, 1/400,

1/1k, 1/2k, 1/5k, 1/10k, 1/50k, x2, x4, x6, x8, x10,

and x15 are selectable.

: You can set the AGC value from 0 to 15.AGC

: You can set the SENS-UP to OFF or AUTO.SENS-UP

: You can set the brightness valueBRIGHTNESS

from 1 to 100.

: You can set the D-WDR to ON to improveD-WDR

the image quality or OFF to disable the function.

: You can set the defog function as ON toDEFOG

enable the function. Position, size, and the defog

gradation are configurable.

3.3.4 Backlight

Backlight Compensation (BLC):

Set the gain of BLC as High, Middle, or Low.-GAIN:

Press the up/down/left/right button to-AREA:

define the BLC position and size. Select RET or

AGAIN to go back the BLC menu or re-define the

BLC area.

Restore the BLC settings to the default.-Default:

HSBLC:

Select an HSBLC area. Set the DISPLAY status as ON.

Press the up/down/left/right button to define the

area position and size. Set the HSBLC LEVEL from 0

to 100. Select ALL DAY or Night for the HSBLC mode.

Set the BLACK MASK status as ON or OFF.

HSBLC

1. SELECT AREA 1

2. DISPLAY ON 8

3. LEVEL ---|------ 40

4. MODE ALL DAY

5. BLACK MASK ON

6. DEFAULT 8

7. RETURN RET

Figure 3-3 HSBLC

3.3.5 White Balance (WB)

INDOOR, OUTDOOR, MANUAL, ATW (Auto-tracking

White Balance), AWC→SET are selectable.

3.3.6 Day & Night

Color, B/W, and EXT are selectable for DAY and

NIGHT switches.

3.3.7 NR

: You can set 2D NR status as ON or OFF.2D NR

: Set the Smart NR status as ON and adjust3D NR

the 3D smart NR sensitivity ranges from 0 to 100.

Set the 3D NR LEVEL ranges from 0 to 100. Set the

2D&3D NR

1. 2DNR OFF

2. 3DNR ON 8

3. RETURN RET

3D NR

1. SMART NR ON8

2. LEVEL ------|--8 0

3. START. AGC -|--------10

4. END. AGC -|--------10

5. RETURN RET

Figure 3-5 NR

Figure 3-6 3D NR

3.3.8 SPECIAL

: Edit the camera title on this section.Camera Title

:D-effect

: Set the freeze function as ON or OFF.-FREEZE

: OFF, MIRROR, V-FLIP, and ROTATE are-MIRROR

selectable for mirror.

: Define the zoom area by configuring-D-ZOOM

the position from PAN & TILT.

: The D-Zoom area, sensitivity-SMART D-ZOOM

and time are configurable.

: Set the NEG IMAGE as ON or OFF.-NEG.IMAGE

SPECIAL

1. CAM TITLE ON 8

2. D-DFFECT 8

3. MOTION OFF

4. PRIVACY OFF

5. LANGUAGE ENG 8

6. DEFECT 8

7. VERSION 130722

8. RETURN RET

Figure 3-7 Special

MOTION

1. SELECT AREA 1

2. DISPLAY ON8

3. SENSIT IVITY ----|---- 30

4. MOTION VIEW ON

5. DEFAULT 8

6. RETURN RET

Figure 3-8 Motion Detection

Motion: Select a MOTION area. Set the DISPLAY

status as ON or OFF. Press the up/down/left/right

button to define the position and size of the area.

Set the SENSITIVITY from 0 to 60. Set the MOTION

VIEW status as ON or OFF.

Privacy: Select a PRIVACY area. Set the DISPLAY

status as INV, MOSAIC, COLOR or OFF. Press the

up/down/left/right button to define the position

and size of the area.

Defect: LIVE DPC, STATIC DPC and Black DPC are

adjustable in this section.

: You can check the software version of theVersion

device.

PRIVACY

1. SELECT AREA 1

2. DISPLAY MOSAIC 8

3. COLOR 10

4. TRANS. 1

5. DEFAULT 8

6. RETURN RET

ADJUST

1. SHARPNESS --------|15

2. MONITOR LCD8

3. LSC OFF

4. VIDEO. OUT PAL

5. RETURN RET

3.3.9 ADJUST

: Adjust the sharpness from 0 to 15.Sharpness

: Monitor CRT, and Monitor LCD areMonitor

selectable.

: Set the LSC status as ON or OFF.LSC

3.3.10 RESET

Reset all the settings to the default.

3.3.11 EXIT

Press OK to exit the menu.

START. AGC level as the threshold to enable AGC,

and set the END. AGC level as the threshold to

disable AGC.

Figure 3-9 Privacy Mask Figure 3-10 Adjust

Produktspezifikationen

Marke:	Hikvision
Kategorie:	Überwachungskamera
Modell:	DS-2CE56C2T-IT1(3.6MM)

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hikvision DS-2CE56C2T-IT1(3.6MM) benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Überwachungskamera Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024

Hikvision DS-2CE56C0T-IT3 Bedienungsanleitung

8 Oktober 2024

Hikvision iDS-TCV900-AI Bedienungsanleitung

3 Oktober 2024

Hikvision DS-2CE56C2T-IT3(3.6MM) Bedienungsanleitung

3 Oktober 2024

Hikvision iDS-2CD7A26G0/P-IZHS Bedienungsanleitung

2 Oktober 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024

Friedland E895 Bedienungsanleitung

10 Oktober 2024

Elro RM 140 Bedienungsanleitung

9 Oktober 2024

D-Link DCS-5000L Bedienungsanleitung

9 Oktober 2024

Dahua Technology Ultra IPC-HF7842F Bedienungsanleitung

8 Oktober 2024

Lorex E891AB Bedienungsanleitung

7 Oktober 2024

Overmax Camspot 3.6 Bedienungsanleitung

6 Oktober 2024