Hikvision DS-2CE56C2N-IT3 Bedienungsanleitung

Hikvision Überwachungskamera DS-2CE56C2N-IT3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-2CE56C2N-IT3 (2 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Dome Camera
User Manual
www.hikvision.com
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual applies to
Type Model
IDS-2CE5582P(N), DS-2CE55C2P(N)
DS-2CE5582P(N)-IRP, DS-2CE55C2P(N)-IRP
DS-2CE5582P(N)-IR,DS-2CE55C2P(N)-IR
DS-2CE5682P(N)-IT3, DS-2CE56C2P(N)-IT3
II
III
IV DS-2CE5582P(N)-VFIR3
This manual may contain several technical
incorrect places or printing errors, and the
content is subject to change without notice.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
DISCLAIMER STATEMENT
Underwriters Laboratories Inc. (”UL” has not)
tested the performance or reliability of the
security or signaling aspects of this product.
Regulatory Information
FCC Information
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
UL Certification does not
performance or reliability of the
signaling aspects of this product UL MAKES NO
REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING
THE PERFORMANCE OR RELIABILITY OF ANY
SECURITY OR SIGNALING RELATED FUNCTIONS
OF THIS PRODUCT.
cover the
security or
0100001030115
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable -
the supplied accessories too are
marked with "CE" and comply
upo n the pu rcha se of eq uival ent new equipment,
or di spos e of it at designat ed col lection po ints.
For mor e info rma tion see:
www.recyclethis.info.
2006/66/EC (battery directive):
This product contains a battery
that cannot be disposed of as
unsorted municipal waste in the
European Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see:
www.recyclethis.info.
This series of camera adopts new generation
sensor with high sensitivity and advanced circuit
design technology It features high resolution.
low image distortion and low noise etc which.
makes it suitable for surveillance system and
image processing system.
●High-performance sensor and high resolution
bring high-quality image
●IR LED enables day night surveillance
●Day/night auto switch
●ATW brings high color rendition
●Auto electronic shutter control to adapt to the
different surveillance environments
●Auto gain control, adaptive brightness
●High SNR brings high-quality image
●Ingress protection: IP66
Type camera doesn’t support day night autoⅠ
switch and IP .
DS-2CE5582P N IRP and DS- CE55C P N IRP
don’t support IP66.
,
, ,
/
Notes:
/
66
( )- 2 2 ( )-
1 Introduction
1.1 Product Features
1.2 Overview
2 Installation
Before you start:
●Please make sure that the device in the package
is in good condition and all the assembly parts
are included.
●Please make sure that all the related equipment
is power-off during the installation.
●Check the specification of the products for the
. installation environment
●Check whether the power supply is matched
with your AC outlet to avoid damage.
●If the product d oes not function properly, please
contact your dealer or the nearest ser vice
center. Do not disassemble the camera for
repair or maintenance by yourself.
●Please make sure that the wall or the ceiling is
strong enough to withstand 3 times the weight
of the camera.
UD.6L0201D0172A01
therefore with the applicable harmonized
European standards listed under the Low Voltage
Directive 2006/95/EC, the EMC Directive 2004/
108/EC.
UL has only tested for fire, shock or casualty
hazards as outlined in Ul’s Standard(s) for Safety,
UL60950-1.
2002/96/EC (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municip al was te in th e European
Uni on. For pr oper recyc ling , return
thi s product to your local su ppli er
Power
Cable
Power
Cable
Power Cable
Zoom Focus &
Video Cable
Video
Cable
Power Cable
Mounting
Base
Lock
Screw
Enclosure Camera
TYPE
II
Enclosure
Trim Ring
Mounting
Base
Video
Cable
Enclosure
Trim Ring
Mounting
Base
Video
Cable
Camera
TYPE
III
Camera
Adjustable Screw
Black Liner
Lower
Dome
TYPE
IV
TYPE
I
Camera
1.Hold the mounting base, and rotate the lower
dome counterclockwise to disassemble the
lower dome and the black liner.
2.Drill the screw holes and the cable hole the
ceiling according to the supplied drill template.
on
83.5
2- 4.5∅
Steps:
Figure 2-1 The Disassembling
2.1 Ceiling Mounting for Type I
Camera
3.Route the cables to the cable hole and
the corresponding power cable and video cable.
4.Secure the mounting base to the ceiling with
the self tapping screws.
connect
-
6.Fit the black liner back to the camera.
7.Install the lower dome back to the camera and
rotate it clockwise to get it secured.
Figure 2-2 The Securing & 3-axis Adjustment
5.Adjust the Lens
1).Loosen the tilting lock screws besides the
lens.
2).Adjust the camera from the pan angle
( degrees); tilt angle (0~90 degrees),
and rotate the lens(0~355 degrees) to get the
optimum angle.
3).Tighten the tilting lock screws.
0~355
108
Screw Hole
∅86
108
∅72
Steps:
1.Drill the screw holes and the cable hole
according to the drill template.
Figure 2-5 Drill Template of Type CameraⅢ
2.Secure the mounting base to the ceiling with
.the screws
Figure 2-6 Secure the Mounting Base
3.Route the cables to the cable hole and
the corresponding power cable and
video cable.
4.Secure the camera to the mounting base.
5.Install the enclosure and the trim ring to
camera.
connect
Figure 2-7 Secure the Components
Camera
Figure 2-4 Drill Template of Type CameraⅡ
110
Hole
Ceiling Mounting
Hole
110
∅102
∅5
∅20
83.5
2.2 Ceiling Mounting for Type II/ III
Screw Hole
Template
3- 4.5∅
∅110
45
3939
22.5
22.5
6.Adjust the surveillance angle according to the
figure below.
7.Rotate the trim ring clockwise to secure the
camera.
Figure 2-10 The Lock Screw
Figure 2-8 Lens Adjustment
2.3 Ceiling Mounting for Type IV
Camera
Figure 2-9 The Drill Template
2.Loosen the lock screw to disassemble the
camera from the mounting base.
3.Secure the mounting base to the ceiling.
Steps:
1.Drill the screws holes and the cable hole on the
ceiling according to the supplied drill template.
360°
360°
0-75°
P 0°an 360° -
Rotation 0° 360°-
Tilt 0° °-75
4.Route the cables to the cable hole and connect
the corresponding cables.
5.Secure the camera to the mounting base by
tightening the lock screw.
6.Adjust the camera according to the figure
below to get an optimum angle.
Figure 2-11 Lens Adjustment
7.Use the screwdriver to adjust the ZOOM screw
and the FOCUS screw until you get the
optimum image.
Figure 2-12 Zoom and Focus Adjustment
2.4 Power Supply
Figure 2-13 The Power Cable & the Video Cable
Note:
Please make sure that the power adapter is
compatible with the camera, and the standard
power supply is 12V DC Please refer to the.
technical specification for more information.
Figure 2-3 Complete the Installation

Produktspezifikationen

Marke: Hikvision
Kategorie: Überwachungskamera
Modell: DS-2CE56C2N-IT3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hikvision DS-2CE56C2N-IT3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera Hikvision

Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE56C0T-IT3 Bedienungsanleitung

8 Oktober 2024
Hikvision

Hikvision iDS-TCV900-AI Bedienungsanleitung

3 Oktober 2024
Hikvision

Hikvision DS-2CE56C2T-IT3(3.6MM) Bedienungsanleitung

3 Oktober 2024
Hikvision

Hikvision iDS-2CD7A26G0/P-IZHS Bedienungsanleitung

2 Oktober 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Friedland

Friedland E895 Bedienungsanleitung

10 Oktober 2024
Elro

Elro RM 140 Bedienungsanleitung

9 Oktober 2024
D-Link

D-Link DCS-5000L Bedienungsanleitung

9 Oktober 2024
Dahua Technology

Dahua Technology Ultra IPC-HF7842F Bedienungsanleitung

8 Oktober 2024
Lorex

Lorex E891AB Bedienungsanleitung

7 Oktober 2024
Overmax

Overmax Camspot 3.6 Bedienungsanleitung

6 Oktober 2024