Hikvision DS-2CE55A2P-VFIR3 Bedienungsanleitung

Hikvision Sicherheitskamera DS-2CE55A2P-VFIR3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-2CE55A2P-VFIR3 (2 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Turret Camera

User Manual

www.hikvision.com

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual applies to

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

0200001030603

FCC Conditions

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

upon the purcha se of equ ivalent new equipment,

or disp ose of it at d esignated col lecti on points.

For more inf ormation see: www.recyclethis.info.

2006/66/EC (battery directive):

This product contains a battery

that cannot be disposed of as

unsorted municipal waste in the

European Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

This series of camera adopts new generation

sensor with high sensitivity and advanced circuit

design technology It features high resolution.

low image distortion and low noise etc which.

makes it suitable for surveillance system and

image processing system.

●High-performance sensor and high resolution

bring high-quality image

●IR LED enables day night surveillance

●Day/night auto switch

●ATW brings high color rendition

●Auto electronic shutter control to adapt to the

different surveillance environments

●Auto gain control, adaptive brightness

●High SNR brings high-quality image

●Ingress protection: IP66

Type camera doesn’t support IR and IPⅠ.

DS-2CE5512/5582/55A2/55C2P N IRP don’t

support IP66.

, ,

Notes:

● 66

●( )-

1 Introduction

1.1 Product Features

1.2 Overview

2 Installation

Before you start:

●Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

●Please make sure that all the related equipment

is power-off during the installation.

●Check the specification of the products for the

. installation environment

●Check whether the power supply is matched

with your AC outlet to avoid damage.

●If the product does not function properly, please

contact your dealer or the nearest service

center. Do not disassemble the camera for

repair or maintenance by yourself.

●Please make sure that the wall or the ceiling is

strong enough to withstand 3 times the weight

of the camera.

UD.6L0201D1091A01

2012/19/EU (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, retur n

this product to your local suppli er

TYPE

Video Cable

Power Cable

Camera

Adjustable Screw

Black Liner

Lower

Dome

Please refer to the product specification for

camera parameters and functions.

This product and - if applicable - the

supplied accessories too are marked

with "CE" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/EC, the EMC Directive 2004/108/EC ,

the RoHS Directive 2011/65/EU.

Power

Cable

TYPE

III

TYPE

Mounting

Base

Power

Cable

Trim Ring

Enclosure

Video

Cable

Camera

Power

Cable

Mounting Base

Enclosure

Camera

Video

Cable

Enclosure

Mounting

Base

Trim Ring

Video

Cable

Camera

Mounting

Base

Enclosure Zoom Focus &

Lock

Screw

Video Cable

Power

Cable

Camera

Type Model

IDS-2CE5582P(N),

DS-2CE55C2P(N)

DS-2CE5512P(N),

DS-2CE55A2P(N),

DS-2CE55A2P(N)-IRP, DS-2CE55C2P(N)-IRP

DS-2CE5512P(N)-IR,DS-2CE5582P(N)-IR,

DS-2CE55A2P(N)-IR,DS-2CE55C2P(N)-IR

DS-2CE5512P(N)-IRP, DS-2CE5582P(N)-IRP

DS-2CE5682P(N)-IT1 DS-2CE5682P(N)-IT3,

DS-2CE56A2P(N)-IT3,DS-2CE56C2P(N)-IT3

III

DS-2CE5582P(N)-VFIR3,

DS-2CE55C2P(N)-VFIR3

DS-2CE55A2P(N)-VFIR3

DS-2CE5582P(N)-IRM,

DS-2CE55C2P(N)-IRM

DS-2CE55A2P(N)-IRM,

1.Hold the mounting base, and rotate the lower

dome counterclockwise to disassemble the

lower dome and the black liner.

2.Drill the screw holes and the cable hole the

ceiling according to the supplied drill template.

Steps:

Figure 2-1 The Disassembling

2.1 Ceiling Mounting for Type I

Camera

3.Route the cables to the cable hole and

the corresponding power cable and video cable.

4.Fix the mounting base to the ceiling with

the supplied screws.

connect

6.Fit the black liner back to the camera.

7.Install the lower dome back to the camera and

rotate it clockwise to get it secured.

Figure 2-2 3-axis Adjustment

5.Adjust the Lens

1).Loosen the tilting lock screws besides the

lens.

2).Adjust the camera from the pan angle

( ); tilt angle (0 ~ 90 ), and rotate

the lens(0 ~355 ) to get the optimum angle.

3).Tighten the tilting lock screws.

0 ~ 355° ° ° °

° °

Steps:

1.Drill the screw holes and the cable hole

according to the drill template.

Figure 2-5 Fix the Mounting Base

2.Fix the mounting base to the ceiling with the

supplied screws.

connect

3.Route the cables to the cable hole and

the corresponding power cable and video cable.

4.Secure the camera to the mounting base.

5.Fix the enclosure to camera to complet the

installation..

Figure 2-6 Fix the Components

Figure 2-4 Drill Template of Type CameraⅡ/ Ⅲ

Camera

2.2 Ceiling Mounting for Type II/ III

6.Adjust the surveillance angle according to the

figure below.

7.Rotate the trim ring clockwise to secure the

camera.

Figure 2-12 The Lock Screw

Figure 2-7 3-axis Adjustment

2.3 Ceiling Mounting for Type IV

Camera

2.Loosen the lock screw to disassemble the

camera from the mounting base.

Steps:

1.Drill the screws holes and the cable hole on the

ceiling according to the supplied drill template.

ix3.F the mounting base to the ceiling.

4.Route the cables to the cable hole and connect

the corresponding cables.

5.Secure the camera to the mounting base by

tightening the lock screw.

6.Adjust the camera according to the figure

below to get an optimum angle.

Figure 2-13 3-axis Adjustment

7.Use the screwdriver to adjust the ZOOM screw

and the FOCUS screw until you get the

optimum image.

Figure 2-14 Zoom and Focus Adjustment

Figure 2-3 Complete the Installation

Steps:

1.Drill the screw holes and the cable hole

according to the drill template.

Figure 2-8 The Drill Template of Type IV Camera

2.Fix the mounting base to the ceiling with the

supplied screws.

Figure 2-9 Fix the Mounting Base and the Camera

6.Adjust the camera according to the figure below

to get an optimum angle.

3.Route the cables to the cable hole and

corresponding power cable and video cable.

4.Secure the camera to the mounting base.

5.Fix the enclosure to camera to complete the

installation.

connect

Figure 2-10 3-axis Adjustment

2.4 Ceiling Mounting for Type V

Camera

Figure 2-11 The Drill Template of Type V Camera

355°

0-90°

P 0° ~ an 360°

Tilt 0° ~ 75°

Rotation 0° ~ 360°

Template

Screw Hole Screw Hole

Screw Hole

Hole

Ceiling Mounting

Hole

Screw Hole

Drilling Template

Screw Hole

360°

0 ~ 75°

360°

0 ~ 75°

Produktspezifikationen

Marke:	Hikvision
Kategorie:	Sicherheitskamera
Modell:	DS-2CE55A2P-VFIR3
WLAN:	Nein
Breite:	123.9 mm
Tiefe:	134.2 mm
Gewicht:	800 g
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Betriebstemperatur:	-40 - 60 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Eingebauter Ethernet-Anschluss:	Nein
Power over Ethernet (PoE):	Nein
Typ:	CCTV Sicherheitskamera
Stromverbrauch (max.):	5 W
Analoges Signalformatsystem:	PAL
Rauschverhältnis (SNR):	62 dB
Fokuseinstellung:	1.4
Größe des Bildsensors:	1/3 Zoll
Schwenkbereich:	0 - 360 °
Neigungswinkelbereich:	0 - 75 °
Formfaktor:	Kuppel
Maximale Auflösung:	976 x 496 Pixel
Unterstützung von Positionierung:	Outdoor
DC-Ausgang Volt:	+12V
Brennweitenbereich:	- mm
Tag/ Nachtmodus:	Ja
Mindestbeleuchtung:	0.1 Lux
Nachtsichtdistanz:	40 m
LED Typ:	IR
Sensor-Typ:	DIS
Nachtsicht:	Ja
Drehungswinkel:	360 °
Kamera Verschlusszeit:	1/50 - 1/100000 s
Composite Video-Ausgang:	1
Betrachtungswinkel (horizontal):	80 °
Betrachtungswinkel (vertikal):	27.2 °
Anzahl der TV-Linien:	700