Hikvision DS-2CE16D7T-IT1 Bedienungsanleitung

Hikvision Sicherheitskamera DS-2CE16D7T-IT1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-2CE16D7T-IT1 (9 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/9

TURBO HD

D7T Series Bullet Camera

User Manual

UD00387B

User Manual

Thank you for purchasing our product. If there are any

questions, or requests, please do not hesitate to

contact the dealer.

This manual applies to the models below:

Type

Model

Type I

Camera

DS-2CE16D(F) - 7T IT

Type II

Camera

DS-2CE16D(F) -IT1 7T

DS-2CE16D(F) -IT3 7T

DS-2CE16D(F) -IT5 7T

This manual may contain several technical incorrect

places or prinng errors, and the content is subject to

change without noce. The updates will be added to

the new version of this manual. We will readily improve

or update the products or procedures described in the

manual.

0100001060112

Privacy Noce

Surveillance laws vary by jurisdicon. Check all relevant

laws in your jurisdicon before using all this product for

surveillance purpose to ensure that your use of this

product conforms.

Regulatory Informaon

FCC Informaon

FCC compliance: This equipment has been tested and

found to comply with the limits for a digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference when the equipment is operated

in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instrucon manual, may cause harmful interference to

radio communicaons. Operaon of this equipment in a

residenal area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

FCC Condions

This device complies with part 15 of the FCC Rules.

Operaon is subject to the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired

operaon

EU Conformity Statement

This product and - if applicable - the

supplied accessories too are marked with

"CE" and comply therefore with the

applicable harmonized European

standards listed under the Low Voltage Direcve

2006/95/EC, the EMC Direcve 2004/108/EC.

2002/96/EC (WEEE direcve): Products

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier

upon the purchase of equivalent new equipment, or

dispose of it at designated collecon points. For more

informaon see: www.recyclethis.info.

2006/66/EC (baery direcve): This

product contains a baery that cannot be

disposed of as unsorted municipal waste in

the European Union. See the product

documentation for specic battery

informaon. The battery is marked with

this symbol, which may include lettering to indicate

cadmium (Cd), lead (Pb), or mercury (Hg). For proper

recycling, return the baery to your supplier or to a

designated collecon point. For more informaon see:

www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A)

standards requirements.

1 Introducon

1.1 Product Features

This series of camera adopts high performance sensor

and advanced circuit board design technology. It

features high resoluon, low distoron, and low noise,

etc. It is suitable for surveillance system and image

process system.

The main features are as follows:

 High performance CMOS sensor and high resoluon

bring high-quality image;

 Low illuminaon, 0.01 Lux @ (F1.2, AGC ON), 0 Lux

with IR;

 IR cut lter with auto switch;

 OSD menu, parameters are congurable;

 Auto white balance and internal synchronization;

 SMART IR mode;

 True WDR;

 Advanced 3-axis design meets dierent installation

requirements;

1.2 Overview

This manual applies to two types of bullet cameras.

The overviews of each type are shown in the gures below,

please refer to the actual sample.

1.2.1 Overview of Type I Camera

Main Body

Photoconducve Resistance

Lens

Bracket

Video Cable

DC 12V

Power Cord

Figure 1-1 Overview of Type I Camera

1.2.2 Overview of Type Camera II

Camera

Bracket

Video Cable

DC V Power Cord 12

Lens

Figure 1-2 Overview of Type II Camera

Produktspezifikationen

Marke:	Hikvision
Kategorie:	Sicherheitskamera
Modell:	DS-2CE16D7T-IT1
Breite:	86.7 mm
Tiefe:	226 mm
Gewicht:	680 g
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP66
Übertragungstechnik:	Kabelgebunden
Höhe:	81.6 mm
Energiequelle:	Gleichstrom
Befestigungstyp:	Decke/Wand
Betriebstemperatur:	-40 - 60 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Typ:	CCTV Sicherheitskamera
Stromverbrauch (max.):	5 W
Unterstützte Sprachen:	CHI (SIMPL),CHI (TR),ENG
Analoges Signalformatsystem:	NTSC,PAL
Unterstützte Grafik-Auflösungen:	1920 x 1080 (HD 1080)
Rauschverhältnis (SNR):	62 dB
Full-HD:	Ja
Geräuschunterdrückung:	Ja
Blickwinkel (FOV):	82.2 °
Schwenkbereich:	0 - 360 °
Neigungswinkelbereich:	0 - 90 °
Formfaktor:	Geschoss
Maximale Auflösung:	1928 x 1088 Pixel
Unterstützung von Positionierung:	Outdoor
DC-Ausgang Volt:	12
Bis zu 30 Frames pro Sekunde:	25 fps
Megapixel insgesamt:	2 MP
Anzahl der Kameras:	1
Tag/ Nachtmodus:	Ja
Mindestbeleuchtung:	0.01 Lux
Sensor-Typ:	CMOS
Objektivanschluss:	M12
Weißabgleich:	Auto
Wetterfest:	Ja
Wide Dynamic Range (WDR):	Ja
Drehungswinkel:	360 °
Kamera Verschlusszeit:	1/25 - 1/50000 s
Flip & Spiegel:	Ja
Gegenlichtkompensation:	Ja
Smart-IR:	Ja
Infrarot (IR)-Abschaltfilter:	Ja
Feste Brennweite:	3.6 mm