Hikvision DS-2CE16D7T-(A)IT3Z Bedienungsanleitung

Hikvision Bewakingscamera DS-2CE16D7T-(A)IT3Z

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-2CE16D7T-(A)IT3Z (8 Seiten) in der Kategorie Bewakingscamera. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
TURBO HD
D(F) Series 7T
Bullet & Turret Camera
User Manual
UD00380B
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, please do not hesitate to
contact the dealer.
This manual applies to the models below:
Type
Model
Type I Camera
DS-2CE16D(F) -AIT3Z 7T
DS-2CE16D(F) -IT3Z 7T
Type Camera II
DS-2CE56D(F) -IT3Z 7T
This manual may contain several technical incorrect
places or prinng errors, and the content is subject to
change without noce. The updates will be added to
the new version of this manual. We will readily improve
or update the products or procedures described in the
manual.
0100001060119
Privacy Noce
Surveillance laws vary by jurisdicon. Check all relevant
laws in your jurisdicon before using all this product for
surveillance purpose to ensure that your use of this
product conforms.
Regulatory Informaon
FCC Informaon
FCC compliance: This equipment has been tested and
found to comply with the limits for a digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instrucon manual, may cause harmful interference to
radio communicaons. Operaon of this equipment in a
residenal area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC Condions
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condio ns:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaon
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Low Voltage Direcve
2006/95/EC, the EMC Direcve 2004/108/EC.
2002/96/EC (WEEE direcve): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collecon points. For more
informaon see: www.recyclethis.info.
2006/66/EC (baery direcve): This
product contains a baery that cannot be
disposed of as unsorted municipal waste in
the European Union. See the product
documentaon for specic battery
informaon. The battery is marked with
this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the baery to your supplier or to a
designated collecon point. For more informaon see:
www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.
1 Introducon
1.1 Product Features
This series of camera adopts high performance sensor
and advanced circuit board design technology. It
features high resoluon, low distoron, and low noise,
etc. It is suitable for surveillance system and image
process system.
The main features are as follows:
High performance CMOS sensor and high resoluon
bring high-quality image;
Low illuminaon, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR;
IR cut lter with auto switch;
OSD menu parameters are congurable; ,
Auto white balance and internal synchronization;
SMART IR mode;
True WDR;
Advanced 3-axis design meets dierent installation
requirements
1.2 Overview
The cables of device vary according to dierent models. The
cables of each type are shown in the gures below, please
refer to the actual sample.
You can debug the camera by connecng an auxiliary HD
TVI cable to the auxiliary video output.
1.2.1 Overview of Type I Camera
Photoconducve
Resistance
Model I Cables
Video Cable
24VAC/ VDC 12
Power Cord
Video Cable
DC 12V
Power Cord
Model II Cables
Main Body
Lens
Bracket
Cables
Auxiliary Video
Output
Menu Buon
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type Camera II
Camera
Lock Screw
Enclosure
Video Cable
DC 12V
Power Cord
Base Plate
Figure 1-2 Overview of Type II Camera

Produktspezifikationen

Marke: Hikvision
Kategorie: Bewakingscamera
Modell: DS-2CE16D7T-(A)IT3Z

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hikvision DS-2CE16D7T-(A)IT3Z benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Bewakingscamera Hikvision

Bedienungsanleitung Bewakingscamera

Neueste Bedienungsanleitung für -Kategorien-