Hikvision DS-2CE16D0T-IR Bedienungsanleitung

Hikvision Sicherheitskamera DS-2CE16D0T-IR

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-2CE16D0T-IR (4 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

TVI Bullet &Turret Camera

User Manual

Thank you for purchasing our product. If there

are any questions, or requests, please do not

hesitate to contact the dealer.

This manual may contain several technical

incorrect places or printing errors, and the

content is subject to change without notice.

The updates will be added to the new version of

this manual. We will readily improve or update

the products or procedures described in the

manual.

Regulatory Information

FCC Information

FCC compliance: This equipment has been

tested and found to comply with the limits for a

digital device, pursuant to part 15 of the FC C

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated in

a commercial environment. This equipment

generates, uses, and can radiate radio

frequency energy and, if not installed and used

in accordance with the instruction manual, may

cause harmful interference to radio

communications. Operation of this equipment in

a residential area is likely to cause harmful

interference in which case the user will be

required to correct the interference at his own

expense.

0200011051130

FCC Conditions

This device complies with part 15 of the FC C

Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful

interference.

2. This device must accept any interference

received, including interference that may

cause undesired operation.

EU Conformity Statement

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points.

For more information see: www.recyclethis.info.

2006/66/E C (battery directive):

This product contains a battery that

cannot be disposed of as unsorted

municipal waste in the European

Union.

See the product documentation for specific

battery information. The battery is marked with

this symbol, which may include lettering to

indicate cadmium (Cd), lead (Pb), or mercury (Hg).

For proper recycling, return the battery to your

supplier or to a designated collection point. For

more information see: www.recyclethis.info.

This series of camera adopts new generation

sensor with high sensitivity and advanced circuit

design technology It features high resolution,.

low image distortion and low noise, etc , which.

makes it suitable for surveillance system and

image processing system.

l High performance CMOS sensor and high

resolution bring high-quality image;

l Low illumination;

l Support auto white balance;

l Unit transmission control;

l Advanced 3-axis design meets different

installation requirements.

1 Introduction

1.1 Product Features

1.2 Overview

U D.6L0201D2079A01

2012/19/E U (W EEE directive):

Products marked with this symbol

cannot be disposed of as unsorted

municipal waste in the European

Union. For proper recycling, return

this product to your local supplier

Please refer to the product specification for

camera parameters and functions.

This product and - if applicable - the

supplied accessories too are marked

with "CE" and comply therefore with

the applicable harmonized European

standards listed under the Low Voltage Directive

2006/95/E C, the EM C Directive 2004/108/EC ,

the RoH S Directive 2011/65/E U.

1.2.1 Overview of Type I Camera

TURBO HD

Type

Type I

Model

DS-2CE16 T-C0 IR/I RX

DS-2CE16 T-ID0 R/IRX

Mounting Base

HD Video Cable

Power Cable

Sun Shield

Lens

IR LED

1.2.2 Overview of Type II Camera

Type II DS-2C E56C0T-I RX

DS-2C E56C0T-I R

DS-2C E56D0T-IR

Privacy Notice

Surveillance laws vary by jurisdiction. Check all

relevant laws in your jurisdiction before using

this product for surveillance purposes to ensure

HD Video Cable

Mounting Base

Camera

Trim Ring Enclosure

Power Cable

Side Opening

1.2.3 Overview of Type III Camera

Enclosure

HD Video Cable

Mounting Base

Power Cable

Camera

Trim Ring

Type III

DS-2C E56D0T-IRX

Figure 1-1 Overview of Type I Camera

Figure 1-2 Overview of Type II Camera

Figure 1-3 Overview of Type III Camera

Industry Canada ICE S-003 Compliance

This device meets the CAN I CES-3 (A)/NMB-3(A)

standards requirements.

In the model list, “X” indicates single or multiple

letters. For example, DS-2 CE56C0T-I RX can be

DS-2CE56C0T-IRMM.

5.Adjust the surveillance angle.

1).Loosen No.3 adjusting screw to adjust the

panning position 0 ~ 360 .( ° ° )

.2).Tighten No.3 adjusting screw

3).Loosen the No.2 adjusting screw to adjust the

tilting position 0 ~ 180( ° ° ).

4).Tighten No.2 adjusting screw.

5).Loosen No.1 adjusting screw to adjust the

azimuth angle of the image 0 ~ 360( ° ° ).

.6).Tighten No.1 adjusting screw

Figure 2-3 3-axis Adjustment

3.Connect the corresponding power cable and

video cable.

4.Fix the camera to the ceiling with the supplied

screws.

Figure 2-2 Fix the Camera to the Ceiling

0 to 360° °

0 to 180° °

0 to 360° °

2.2 Installation of Type II Camera

Steps:

1.Drill the screw holes according to the drill

template.

Figure 2-4 The Drill Template

2. Screw the clip plate onto the mounting base

loosely.

Figure 2-5 Screw the Clip Plate

Clip Plate

Figure 2-1 The Drill Template

Screw hole

Figure 2-6 Fix the the Camera

Figure 2-7 3-axis Adjustment

0 to 360° °

0 to 75° ° 0 to 360° °

Clip Plate

3. Fix the mounting base to the ceiling with the

supplied screws.

4.Route the cables through the side opening and

connect the corresponding power cable and

video cable.

5.Pull out the clip plate and secure the camera

with the trim ring to the mounting base.

6.Push the clip plate in and tighten the lock screw

to secure the trim ring.

2.3 Installation of Type CameraIII

1.Drill the screw holes and the cable hole on the

ceiling according to the supplied drill template.

Steps:

Figure 2-8 The Drill Template

Figure 2-9 Fix the Mounting Base and Camera

2.Fix the mounting base to the ceiling with the

supplied screws.

3.Route the cables through the cable hole and

connect the corresponding power cable and

video cables.

4.Secure the camera to the mounting base and fix

the trim ring to the camera, as shown in the

figure below.

Figure 2-11 3-axis Adjustment

7.Adjust the camera according to the figure 2-7 to

get an optimum angle and tighten the trim ring.

Steps:

1.Drill the screw holes in the ceiling according

to the supplied drill template.

2.Hammer the supplied plastic expansion bolt into

the screw holes.

Screw hole

Side Opening

2.1 Ceiling Mounting for Type I

Camera

Both wall mounting and ceiling mounting are

suitable for type bullet camera. Ceiling mountingI

will be taken as an example in the section. And you

can take steps of ceiling mounting as a reference

if wall mounting is adopted.

2 Installation

Before you start:

l Please make sure that the device in the package

is in good condition and all the assembly parts

are included.

l Make sure that all the related equipment is

power-off during the installation.

l Check the specification of the products for the

installation environment.

l Check whether the power supply is matched

with your power output to avoid damage.

l Please make sure the wall is strong enough to

withstand three times the weight of the camera

and the mounting.

l If the wall is the cement wall, you need to insert

expansion screws before you install the camera.

If the wall is the wooden wall, you can use

self-tapping screw to secure the camera.

l If the product does not function properly,

please contact your dealer or the nearest

service center. Do not disassemble the camera

for repair or maintenance by yourself.

5.Adjust the camera according to the figure below

to get an optimum angle.

Figure 2-10 Fix the Trim Ring to the Camera

P Direction

T Direction

R Direction

P Direction

T Direction

R Direction

Produktspezifikationen

Marke:	Hikvision
Kategorie:	Sicherheitskamera
Modell:	DS-2CE16D0T-IR
Gewicht:	400 g
Produktfarbe:	Weiß
Internationale Schutzart (IP-Code):	IP66
Betriebstemperatur:	-40 - 60 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Power over Ethernet (PoE):	Nein
Typ:	CCTV Sicherheitskamera
Stromverbrauch (max.):	4 W
Analoges Signalformatsystem:	NTSC,PAL
Unterstützte Video-Modi:	1080p
Unterstützte Grafik-Auflösungen:	1920 x 1080 (HD 1080)
Rauschverhältnis (SNR):	62 dB
Blickwinkel (FOV):	82.2 °
Schwenkbereich:	0 - 360 °
Neigungswinkelbereich:	0 - 180 °
Formfaktor:	Geschoss
Länge (mm):	149.5 mm
Durchmesser:	70 mm
Maximale Auflösung:	1920 x 1080 Pixel
DC-Ausgang Volt:	12
Bis zu 30 Frames pro Sekunde:	30 fps
Megapixel insgesamt:	2 MP
Tag/ Nachtmodus:	Ja
Mindestbeleuchtung:	0 Lux
Nachtsichtdistanz:	20 m
LED Typ:	IR
Sensor-Typ:	CMOS
Objektivanschluss:	M12
Wetterfest:	Ja
Nachtsicht:	Ja
Drehungswinkel:	360 °
Kamera Verschlusszeit:	1/25 - 1/500000 s
Infrarot (IR)-Abschaltfilter:	Ja
Composite Video-Ausgang:	1
Feste Brennweite:	3.6 mm