Hikvision DS-2CE16C2N-IT3 Bedienungsanleitung

Hikvision Überwachungskamera DS-2CE16C2N-IT3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Hikvision DS-2CE16C2N-IT3 (2 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Model
DS-2CE1582P(N)-IR
DS-2CE15C2P(N)-IR
DS-2CE1682P(N)-IT3
DS-2CE16C2P(N)-IT3
DS-2CE1682P(N)-IT5
DS-2CE16C2P(N)-IT5
DS-2CE1582P(N)-VFIR3
1 Introduction
1.1 Product Features
This series of camera adopts new generation
sensor with high sensitivity and advanced
circuit design technology. It features high
resolution, low image distortion and low noise
features, etc., which makes it suitable for
surveillance system and image processing
system.
●High-performance sensor and high resolution
bring high-quality image
●IR LED enables the day night surveillance/
●IR cut filter auto switch
●ATW brings high color rendition
●Ingress protection:IP66
1.2 Overview
Mounting Bas e
Su n Shi eld
Lens
IR L ED
Power Cable
Vi deo C able
Figure 1-1 Overview of Type CameraⅠ
Lens
IR
LED
Sun Shield Adjustable Screw
Power Cable
Video Cable
Figure 1-2 Overview of Type CameraⅡ
IR LED
Lens
Sun Shield Adjustable Screw
Power Cable
Video Cable
Figure 1-3 Overview of Type CameraⅢ
Ⅰ
Ⅱ
Ⅲ
Mounting Base Video Cable
Power Cable
Sun Shield
Lens
IR LED
Figure 1-4 Overview of Type CameraⅣ
2 Installation
Before you start :
●Make sure that all the related equipment is
power-off during the installation.
●Check the specification of the products for the
installation environment.
●Check whether the power supply is matched
with your AC outlet to avoid damage.
●If the product does not function properly,
please contact your dealer or the nearest
service center. Do not disassemble the
camera for repair or maintenance by
.yourself
●Please make sure that the ceiling or the wall
is strong enough to withstand 3 times the
weight of the camera.
Ⅳ
Type
Bullet Camera
User Manual
www.hikvision.com
UD.6L0201D0170A01
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual applies to
This manual may contain several technical
incorrect places or printing errors, and the
content is subject to change without notice.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
DISCLAIMER STATEMENT
Underwriters Laboratories Inc. (”UL” has not)
tested the performance or reliability of the
security or signaling aspects of this product.
0100001030115
Regulatory Information
FCC Information
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
UL Certification does not
performance or reliability of the
signaling aspects of this product UL MAKES NO
REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING
THE PERFORMANCE OR RELIABILITY OF ANY
SECURITY OR SIGNALING RELATED FUNCTIONS
OF THIS PRODUCT.
cover the
security or
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable -
the supplied accessories too are
marked with "CE" and comply
therefore with the applicable harmonized
European standards listed under the Low Voltage
Directive 2006/95/EC, the EMC Directive 2004/
108/EC.
UL has only tested for fire, shock or casualty
hazards as outlined in Ul’s Standard(s) for Safety,
UL60950-1.
upo n the pu rcha se of eq uival ent new equ ipment,
or di spose of it at desi gnat ed col lection p oint s.
For mor e informa tion see:
www.recyclethis.info.
2006/66/EC (battery directive):
This product contains a battery
that cannot be disposed of as
unsorted municipal waste in the
European Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see:
www.recyclethis.info.
2002/96/EC (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municip al was te in th e European
Uni on. For proper recyc ling, return
thi s prod uct to your local suppli er
Steps:
1.Drill the screw holes and the cable hole on the
ceiling according to the supplied drill template.
2.Route the cables to the cable hole and connect
the corresponding power cable and video cable.
3.Secure the camera to the ceiling with the
self-tapping screws.
Figure 2-2 Secure the Camera to the Ceiling
4.Adjust the Lens.
1).Loosen the panning table to adjust the
panning position 0 to 360 (.
2).Tighten the panning table .
3).Loosen the tilting lock screw to adjust the
tilting position 0 to 90 ( ° °).
4).Tighten the tilting lock screw.
5).Loosen the rotation lock screw to adjust the
azimuth angle of the image 0 to 360 ( ° °).
6).Tighten the rotation lock screw .
° °)
Figure 2-3 Adjust the Lens
Steps:
1.Secure the mount to the wall with the screws.
Figure 2-5 Secure the Camera
Steps:
1.Drill the screws holes and the cable hole on the
ceiling according to the supplied drill template.
Figure 2-7 Secure the Camera to the Ceiling
2.Route the cables to the cable hole and connect
the corresponding cables.
3.Secure the camera to the ceiling with the
self-tapping screws.
4.Adjust the lens.
1).Loosen the panning table to adjust the
panning position (0 to° 360°).
2).Tighten the panning table .
3).Loosen the tilting lock screw to adjust the
tilting position (0 to 90 )° ° .
4).Tighten the tilting lock screw.
5).Loosen the rotation lock screw to adjust the
azimuth angle of the image (0 to 360° °).
6).Tighten the rotation lock screw .
Figure 2-8 Lens Adjustment
5.Adjust the Zoom and the Focus
1).Output the image to the monitor .
2).Adjust the Zoom Screw and Focus Screw till
you get the optimum surveillance angle .
Zoom
Focus
Figure 2-9 Zoom and Focus Adjustment
2.4 Power Supply
Figure 2-10 The Powe Cable & the Video Cable
Note:
Please make sure that the power adapter is
compatible with the camera, and the standard
power supply is 12V DC. Please refer to the
technical specification for more information .
Figure 2-6 Drill Template
Figure 2-4 Secure the Mount
2.Secure the camera to the mount with the
.screws to complete the installation
2.1 Ceiling Mounting for Type I
Camera
2.2 Ceiling Mounting for Type II/ III
Camera
2.3 Ceiling Mounting for Type IV
Camera
Figure 2-1 Drill Template

Produktspezifikationen

Marke: Hikvision
Kategorie: Überwachungskamera
Modell: DS-2CE16C2N-IT3

Brauchst du Hilfe?

Wenn Sie Hilfe mit Hikvision DS-2CE16C2N-IT3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera Hikvision

Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE56C0T-IT3 Bedienungsanleitung

8 Oktober 2024
Hikvision

Hikvision iDS-TCV900-AI Bedienungsanleitung

3 Oktober 2024
Hikvision

Hikvision DS-2CE56C2T-IT3(3.6MM) Bedienungsanleitung

3 Oktober 2024
Hikvision

Hikvision iDS-2CD7A26G0/P-IZHS Bedienungsanleitung

2 Oktober 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Friedland

Friedland E895 Bedienungsanleitung

10 Oktober 2024
Elro

Elro RM 140 Bedienungsanleitung

9 Oktober 2024
D-Link

D-Link DCS-5000L Bedienungsanleitung

9 Oktober 2024
Dahua Technology

Dahua Technology Ultra IPC-HF7842F Bedienungsanleitung

8 Oktober 2024
Lorex

Lorex E891AB Bedienungsanleitung

7 Oktober 2024
Overmax

Overmax Camspot 3.6 Bedienungsanleitung

6 Oktober 2024